Style FSI 1457E BNIC Lola 28 in to 48 in Brushed Nickel Steel Single Curtain Rod Instruction Manual
- June 13, 2024
- Style
Table of Contents
Style FSI 1457E BNIC Lola 28 in to 48 in Brushed Nickel Steel Single
Curtain Rod
Product Information Product Name: Drapery Rod
Trademark: STYLE SELECTIONS and logo design
Manufacturer : LF, LLC
Model Numbers: FSI 1457E BGLD, FSI 1457F BGLD, FSI 1457E BNIC, FSI 1457F BNIC, FSI 1457E MBLK, FSI 1457F MBLK, FSI 1475E BRNZ, FSI 1475F BRNZ, FSI 1475E BNIC, FSI 1475F BNIC, FSI 1475E MBLK, FSI 1475F MBLK, FSI 1172E BNIC, FSI 1172E MBLK, FSI 1172F BNIC, FSI 1172F MBLK
Product Usage Instructions
Problem Drapery rod not level.
Possible Causes
- Drapery rod hook is loose.
- Drapery hooks not anchored correctly.
Solution
- Attach drapery hooks to wall studs if possible.
- If unable to attach to studs, use anchors and screws supplied.
Care and Maintenance Refer to the care and maintenance instructions provided in the user manual.
Package Contents
- A x 2
- B x 2
Hardware Contents
- AA x 2
- BB x 2
- CC x 4
Usage Instructions
For 28-48-inch Drapery Rods
- Using the bracket as a guide, adjust it to the desired height.
- Remove the bracket from the wall and drill a pilot hole using a 3/16 in. bit (not included).
- Insert wall anchors into the pilot hole.
- Repeat steps 1 to 3 for additional brackets, if required.
- Fit the drapes (not included) onto the rod.
- Place the rod, with drapes, onto the mounting brackets.
- Position the finials as desired.
- Tighten the screws on each bracket to secure.
For 48-84-inch Drapery Rods
Follow the same steps as for 28-48-inch drapery rods, but use the appropriate number of brackets and hardware contents.
STYLE SELECTIONS and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
MODEL
Thank you for purchasing this Style Selections product. We’ve created these
easy-to-follow instructions to ensure you spend your time enjoying the product
in-stead of putting it together. But, if you need more information than what
is provided here, please visit Lowes.com, search the item number and refer to
the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
877-888-8225, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
partsplus@lowes.com.
TROUBLESHOOTING
STYLE SELECTIONS and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
MODEL
FSI 1457E BGLD
Thank you for purchasing this Style Selections product. We’ve created these
easy-to-follow instructions to ensure you spend your time enjoying the product
in-stead of putting it together. But, if you need more information than what
is provided here, please visit Lowes.com, search the item number and refer to
the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
877-888-8225, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
partsplus@lowes.com.
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Drapery rod not level. | Drapery hooks not installed correctly. | Make sure to |
use level (not included) during installation.
Drapery rod hook is loose.| Drapery hooks not anchored correctly.| Attach
drapery hooks to wall studs if possible. Use anchors and screws supplied if
you can’t attach to stud.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
TOOLS REQUIRED (NOT INCLUDED
FEELING CONFIDENT?
START YOUR NEXT PROJECT
- Visit lowes.com for more information.
CARE AND MAINTENANCE
- Clean with a soft cloth
- Do not use abrasive cleaning agent solvents or polished at they may damage the finish.
PACKAGE CONTENTS
HARDWARE CONTENTS
28-48-in Drapery Rods Varillas para cortias de 71.12 cm a 121.92 cm
48-84-in Drapery Rods Varillas para cortinas de 121.92 cm a 213.36 cm
INSTALLATION OVERVIEW
-
Using bracket as a guide, adjust to desired height and mark location on wall for mounting screws.
-
Remove bracket from wall. Drill pilot hole using 3/16 in. bit (not included) and insert wall anchors.
NOTE
Anchors are not needed for all installation types.
Attach the adjustable bracket to the wall using the screws provided.
-
Next adjust the bracket distance out from the wall as desired and tighten with screws provided.
NOTE
Repeat steps 1 to 3 for additional brackets. Use level (not included) if necessary. -
Fit drape(s) (not included) on rod.
28-48-in Drapery Rods
-
Fit the rod, with drapes (not included), on the mounting brackets and position the finials as desired. Tighten the screws on each bracket to secure.
48-84-in Drapery Rods
screws on each bracket to secure.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>