Style FSI 1457E BGLD 28 in to 48 in Brushed Gold Steel Single Curtain Rod User Guide
- June 13, 2024
- Style
Table of Contents
Style FSI 1457E BGLD 28 in to 48 in Brushed Gold Steel Single Curtain Rod
Product Information
The Style Selections Drapery Rod is a high-quality product designed for hanging curtains or drapes. It is available in various models and finishes, including FSI 1457E BGLD, FSI 1457F BGLD, FSI 1457E BNIC, FSI 1457F BNIC, FSI 1457E MBLK, FSI 1457F MBLK, FSI 1475E BRNZ, FSI 1475F BRNZ, FSI 1475E BNIC, FSI 1475F BNIC, FSI 1475E MBLK, FSI 1475F MBLK, FSI 1172E BNIC, FSI 1172E MBLK, FSI 1172F BNIC, and FSI 1172F MBLK. Please note that the actual product may vary in appearance from the provided image.
Product Usage Instructions
- Ensure that the drapery rod is level. If it is not level, it may be due to loose drapery rod hooks or incorrect anchoring of the drapery hooks.
- If possible, attach the drapery hooks to wall studs. If this is not possible, use the supplied anchors and screws to secure the drapery hooks to the wall.
- For installation, follow these steps:
- Using the bracket as a guide, adjust it to the desired height.
- Remove the bracket from the wall and drill a pilot hole using a 3/16-inch bit (not included). Insert the supplied wall anchors into the pilot hole.
- Repeat steps 1 and 2 for additional brackets. Use a level (not included) if necessary.
- Fit the drapes (not included) onto the rod.
- For the 28-48-inch drapery rods:
- Fit the rod, with the drapes, onto the mounting brackets.
- Position the finials as desired.
- Tighten the screws on each bracket to secure the rod.
- For the 48-84-inch drapery rods:
- Fit the rod, with the drapes, onto the mounting brackets.
- Position the finials as desired.
- Tighten the screws on each bracket to secure the rod.
Ensure that you follow these instructions carefully for proper installation and usage of the Style Selections Drapery Rod. For any further assistance or inquiries, refer to the user manual or contact our customer support.
DRAPERY ROD VARILLA PARA * CORTINA
STYLE SELECTIONS and logo design are trademarks or registered trademarks of
LF, LLC. All rights reserved.
MODEL/MODELO #FSI 1457E BGLD/ FSI 1457F BGLD/ FSI 1457E BNIC/ FSI 1457F BNIC/
FSI 1457E MBLK/FSI 1457F MBLK/ FSI 1475E BRNZ/ FSI 1475F BRNZ/ FSI 1475E BNIC/
FSI 1475F BNIC/ FSI 1475E MBLK/FSI 1475F MBLK/FSI 1172E BNIC/ FSI 1172E MBLK/
FSI 1172F BNIC/ FSI 1172F MBLK
Thank you for purchasing this Style Selections product. We’ve created these
easy-to-follow instructions to ensure you spend your time enjoying the product
in-stead of putting it together. But, if you need more information than what
is provided here, please visit Lowes.com, search the item number and refer to
the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
877-888-8225, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
partsplus@lowes.com.
TROUBLESHOOTING
PROBLEM PROBLEMA| POSSIBLE CAUSE CAUSA POSIBLE| CORRECTIVE ACTION
ACCIÓN CORRECTIVA
---|---|---
Drapery rod not level.| Drapery hooks not installed correctly.
| Make sure to use level (not included) during installation.
Drapery rod hook is loose.| Drapery hooks not anchored correctly.| Attach drapery hooks to wall studs if possible. Use anchors and screws supplied if you can’t attach to stud.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
TOOLS REQUIRED (NOT INCLUDE D)
FEELING CONFIDENT?
START YOUR NEXT PROJECT
Visit lowes.com for more information.
CARE AND MAINTENANCE
Clean with a soft cloth.
PACKAGE CONTENTS
HARDWARE CONTENTS
-
28-48-in
-
Drapery
-
Rods
-
Varillas
-
para cortinas
-
de 71.12 cm
-
a 121.92 cm
-
48-84-in
-
Drapery
-
Rods
-
Varillas
-
para cortinas
-
de 121.92 cm
-
a 213.36 cm
INSTALLATION OVERVIEW
-
Using bracket as a guide, adjust to desired height and mark location on wall for mounting screws.
-
Remove bracket from wall. Drill pilot hole using 3/16 in. bit (not included) and insert wall anchors.
NOTE
Anchors are not needed for all installation types.
- Attach the adjustable bracket to the wall using the screws provided. Next adjust the bracket distance out from the wall as desired and tighten with screws provided.
NOTE
Repeat steps 1 to 3 for additional brackets. Use level (not included) if
necessary.
- Fit drape(s) (not included) on rod.
28-48-in Drapery Rods
- Fit the rod, with drapes (not included), on the mounting brackets and position the finials as desired. Tighten the screws on each bracket to secure. 48-84-in Drapery Rods
Fit the rod, with drapes (not included), on the mounting brackets and position the finials as desired. Tighten the screws on each bracket to secure.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>