HyperX 44X0020B Cloud III Wireless Gaming Headset User Guide

: June 13, 2024
: HYPERX

Table of Contents

Overview
Questions or Setup Issues?
Simplified Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HyperX 44X0020B Cloud III Wireless Gaming Headset User Guide

Overview

Product Overview

A -Mic mute / mic monitoring button
B – Status LED
C – Power button
D – USB-C charge port
E – Microphone port
F – Volume wheel
Product Instruction
G — Detachable microphone
H – Microphone mute LED

I – USB wireless dongle
J – Dongle status LED
K – Pairing pin hole

L – USB-C to USB-A adapter

M – USB charge cable

Usage

Connect the USB wireless dongle to your device
Power on the headset

Setting up with PC

Right click speaker icon > Select Open Sound settings > Select Sound control panel
Playback Device
Set Default Device to “HyperX Cloud III Wireless”
Recording Device
Set Default Device to “HyperX Cloud III Wireless”

Setting up with PlayStation 5

Go to the home page and select Settings > Sound Microphone

Input Device: USB Headset “HyperX Cloud III Wireless”
Audio Output
Output Device: USB Headset “HyperX Cloud III Wireless”
Output to Headphones: All Audio

Recording Device
Set Default Device to “HyperX Cloud III Wireless”

Status LED

STATUS	LED
Pairing	Flashing green and red every 0.2s
Searching	Slow breathing green
Connected (Battery Level)	90% — 100%: Solid green for 5s

10% — 90%: Blinking green for 5s
< 10%: Blinking red for 5s

Power button

Power on/off – Hold button for 3 seconds to power headset on/off
Battery level status – Press button to see the battery level status on the status LED
The status LED will automatically turn off to conserve battery life

Mic mute / mic monitoring button

Mic mute toggle – Press button to turn the mic mute on/off
Mic monitoring toggle – Hold button for 3 seconds to toggle mic monitoring on/off

Volume wheel
Scroll up and down to adjust volume level

Charging

It is recommended to fully charge your headset before first use.

CHARGE STATUS	STATUS LED
Fully Charged	Solid green
10% — 99%	Breathing green
< 10%	Breathing red

HyperX NGENUITY Software
Go to hyperx.com/ngenuity to download the NGENUITY software. NGENUITY software features include:

software features include:
DTS Headphone: X*
Adjustable auto shut-off behavior
Battery level indicator
PC only

Questions or Setup Issues?

Contact the HyperX support team or see the user manual at hyperx.com/support WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.

Simplified Declaration of Conformity

Hereby, HP declares that the radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following
internet address: www.hp.eu/certificates (search with Model Name)
UK only : Hereby, HP declares that the radio equipment is in compliance with the relevant statutory requirements. The full text of the declaration of conformity is available at the following internet address: www.hp.eu/certificates (search with Model Name)

Battery Information

Contains 3.7V, 1500mAh Li-ion Battery, 5.55Wh Cannot be replaced by user
Radio Technology| Maximum Transmit Power EIRP (mW)
2.4 GHz| 10

The power delivered by the charger must be between min [0.5] Watts required by the radio equipment, and max [2.5] Watts in order to achieve the maximum charging speed.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation .This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
FCC ID: B94-CL007

Canada Notices
This Class B digital apparatus complies with Canadian ICES-003. Avis Canadian

ISED Statement

This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation

RF Exposure Information and Statement

The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available

Fc Maker

©Copyright 2023 HyperX and the HyperX logo are registered trademarks or trademarks of HP Inc. in the U.S. and/or other countries. All registered trademarks and trademarks are property of their respective owners.