IKEA ICPSW5-23NA-1 ÅSKSTORM 23W USB Charger Instruction Manual
- June 13, 2024
- Ikea
Table of Contents
IKEA ICPSW5-23NA-1 ÅSKSTORM 23W USB Charger
Product Information
- Product Model: ICPSW5-23NA-1
- Input: 100-240VAC, 50/60Hz, 0.6A
- Output:
- USB-A: 5.0V DC, 1.0A, 5.0W
- USB-C: 5.0V DC/3.0A, 9.0V DC/2.0A, 12.0V DC/1.5A, 15.0V DC/1.2A
- Power Delivery 3.0 standard
- Manufacturer: IKEA of Sweden AB
Product Usage Instructions
- Ensure that the charger is used for indoor use only.
- Connect the charger to a power source with an input voltage ranging from 100-240VAC and a frequency of 50/60Hz.
- Connect your device to the charger using either the USB-A or USB-C port, depending on your device’s compatibility.
- If using the USB-A port, make sure your device receives a maximum output of 5.0V DC and 1.0A, with a power rating of 5.0W.
- If using the USB-C port, make sure your device receives the appropriate output voltage and current based on its requirements:
- For a 5.0V DC output, the charger can provide a maximum current of 3.0A, with a power rating of 15.0W.
- For a 9.0V DC output, the charger can provide a maximum current of 2.0A, with a power rating of 18.0W.
- For a 12.0V DC output, the charger can provide a maximum current of 1.5A, with a power rating of 18.0W.
- For a 15.0V DC output, the charger can provide a maximum current of 1.2A, with a power rating of 18.0W.
- Make sure to follow any recommended precautionary measures and technical data provided at the back of the charger.
- Do not attempt to repair the product yourself, as it may expose you to dangerous voltage points or other risks. Seek professional assistance for any servicing needs.
- Dispose of the charger separately from household waste. Hand it in for recycling in accordance with local environmental regulations to minimize negative impacts on human health and the environment.
Charger features
- Charges 2 devices
- USB-A outlet can provide up to 0VDC/1.0A.
- USB-C outlet is compatible with Power Delivery 3.0 standard.
Instructions for use
- Connect the power adapter into the wall socket, insert the USB cable into the free slot and the other end to the device you want to charge.
- When charging only use a recommended USB cable for your device and replace faulty cables
Good to know
- USB cable length and quality influences charging speed and performance
- Devices may get warm during charging; this is completely normal and they will gradually cool down again after they are fully charged.
- Charger storage temperature: -20°C to 25°C (-4°F to 77°F).
- Charger operating temperature: 0°C to 45°C (32 °F to 113 °F).
- Unplug the charger from the power source before cleaning and when it is not in use.
- To clean the charger, wipe with a moist cloth. Never submerge the charger in water
For recommended precautionary measures and technical data, see the back of the charger.
Save these instructions for future use.
WARNING:
- The wall socket must be located near the equipment and must be easily
- Only use in dry locations.
- Children should be supervised to ensure they do not play with the product.
- If the device is damaged it shall be destroyed.
- Never use a damage or faulty USB cable for charging, since this can damage the appliance and harm your destroyed.
- If the supply cord is damaged, replace it with a new cord set type-approved for your country.
**PRODUCT SERVICING
**
Do not attempt to repair this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks.
TECHNICAL DATA
- Type: ICPSW5-23NA-1
- Input: 100-240VAC, 50/60Hz, 0.6A
- Output:
- USB-A: 5.0V DC, 1.0A, 5.0W
- USB-C: 5.0V DC/3.0A, 9.0V DC/2.0A, 12.0V DC/1.5A, 15.0V DC/1.2A
This device complies with Part 15 of the FCC Rules. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation Science and Economic Development Canada’s license-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation of the device
WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the quipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.
MX
Distributor: IKEA Supply Mexico,S.A. de C.V., Calle Oriente
© Inter IKEA Systems B.V. 2019
AA-2205708-6
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>