AREBOS AR-HE-SLR02TG Heavy Duty Shelf 875 kg User Manual
- June 13, 2024
- AREBOS
Table of Contents
AREBOS AR-HE-SLR02TG Heavy Duty Shelf 875 kg
Product Information
The Arebos Heavy Duty Shelf 875 kg (Model Nr.: AR-HE-SLR02TG) is a durable
and sturdy storage solution. It has a total load capacity of 1929 lbs (875 kg)
and a load capacity of 385.81 lbs (175 kg) per shelf. The frame of the shelf
is made of galvanized metal, while the shelves are made of MDF wood
fiberboard. It comes with 5 shelves and has a metal thickness of 0.0276 in
(0.70 mm). The shelf itself weighs 27.6 lbs (12.5 kg).
Product Usage Instructions
- Before starting the assembly process, please read and save the user’s manual for future reference.
- Ensure that you have all the necessary parts mentioned in section 3.2 of the user manual.
- Follow the installation instructions provided in section 3.3 of the user manual to assemble the shelf.
- Once assembled, the shelf can be used to store heavy items with a total load capacity of up to 1929 lbs (875 kg).
- Make sure to distribute the weight evenly across the shelves and do not exceed the load capacity per shelf of 385.81 lbs (175 kg).
- Avoid modifying the product without the consent of the manufacturer, as it may void any warranty.
If you have any further questions or need assistance, please contact our customer service at +49 (0) 931-45232700. Please read and save these instructions. Read through this user’s manual carefully before using the product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to the product or property. Please retain instructions for future reference.
Safety Instructions
Symbols
This product has been tested and certified by TÜV Süd. The symbol “GS”
stands for tested safety. Products marked with this symbol comply with the
requirements of the German Product Safety Act (ProdSG)
General safety instructions
- Read the operating instructions carefully before use.
- Save them for future reference.
- The maximum spot load is 385.81 lbs (175 kg) per shelf.
- The weight must be evenly distributed on the shelves.
- Make sure not to exceed the maximum spot load per shelf or for the whole unit.
- Do not place the unit in a room that is very humid because this could damage the shelves.
- Wear safety gloves when assembling the unit.
- Anchor the unit with a suitable wall bracket.
- Note: Make sure not to drill into water pipes or electric cables.
- If the connector tabs of the shelf cross pieces should bend on assembly, they can be bent back into their original position with the aid of a flathead screwdriver.
Technical Specifications
| Model | AR-HE-SLR02TG |
|---|---|
| Dimensions | 70.87 x 35.43 x 15.75 in (180 x 90 x 40 cm) |
| Load capacity total | 1929 lbs (875 kg) |
| Load capacity per shelf | 385.81 lbs (175 kg) |
| Material frame | galvanized metal |
| Material shelves | MDF wood fiber board |
| Number of shelves | 5 |
| Metal thickness | 0.0276 in (0.70 mm) |
| Weight | 27.6 lbs (12,5 kg) |
Assembly
Before Assembly
- Remove all packaging material and check that all the parts are included.
- Check the product for transport damage before assembling.
- Assemble the product on a clean and level surface (e.g. carpet) to avoid damage.
- Use a rubber mallet to avoid damaging the material.
- Place the unit on a level surface. Otherwise, this will compromise safety or the maximum supporting capacity.
- Only use plugs and screws suitable for the type of wall and weight of the shelves. Plugs, screws and tools for wall mounting are sold separately.
- Exclusion of liability: There is no liability – also not for secondary damage – if the bug was caused in order by wrong or unintended installation.
Parts
Installation
- Assemble the first shelf support as shown in the diagram. For this fix two of the girders C and D at the corner pieces (B).
- Fix the shelf support in the middle of both girders and bend the connector tabs, so the support cannot move out anymore.
- Connect each of the corner pieces (B) with one other by using the included couplers (F).
- Place the shelves (A) on each level.
- Fit the plastic feet (G) on the top and bottom ends of the corner pieces.
Disposal Instruction
Disposal of the packaging
Please make reference to the guidelines and standards for appropriate disposal
of the packaging valid in your region. In part, the package may consist of
plastic bags – watch this respect, with special care to ensure that this is
not out of the reach of children. There is a risk of suffocation!
Disposal of waste equipment
Equipment must be disposed of in accordance with the rules and regulations of
the local waste disposal. At the end of the long life of your article, please
dispose of the valuable raw materials for proper disposal so that proper
recycling can take place. If you are not sure how to proceed, the local waste
disposal companies or recycling centers are happy to help.
Imprint
Name of the product: Arebos Heavy Duty Shelf 875 kg
Model Nr.: AR-HE-SLR02TG
Art. Nr.: 4260551585517
Tested acc. To: PPP 51028B:2014 AfPS GS 2014:01 PAK
If this product is modified without our consent, it loses the right to any
warranty.
Date/Manufacturer Signature/Location: Würzburg, 16.07.2019
Identification of the signatory Dipl.-Inform. (Univ.) Korhan Canbolat, head of
the company
Authorised representative for the technical documentation:
Korhan Canbolat
Office address: Canbolat Vertriebs GmbH
Gneisenaustraße 10-11
D-97074 Würzburg
The return address can be found in the imprint:
https://www.arebos.de/impressum/
VAT identification number: DE 263752326
The court of the Commercial Register is Würzburg, HRB 10082
WEEE Reg.-No. DE 61617071
References
- Englisch ⇔ Deutsch - leo.org: Startseite
- Englisch ⇔ Deutsch - leo.org: Startseite
- Englisch ⇔ Deutsch - leo.org: Startseite
- Impressum
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>