AREBOS AR-HE-SW30 2x Heavy Duty Shelf 875 kg User Manual

AREBOS AR-HE-SW30 2x Heavy Duty Shelf 875 kg

Product Information
The product is a set of 2 heavy-duty shelves with a load capacity of 875 kg. The model number is AR-HE-SW30. The shelves are manufactured by AREBOS.

Technical Specifications

• Model: AR-HE-SW30
• Dimensions: 70.87 x 35.43 x 11.81 in (180 x 90 x 30 cm)
• Total Load Capacity: 1929 lbs (875 kg)
• Load Capacity per Shelf: 386 lbs (175 kg)
• Material Frame: Galvanized Metal
• Material Shelves: MDF Wood Fiber Board
• Number of Shelves: 5
• Metal Thickness: 0.0276 in (0.70 mm)
• Weight: 33.1 lbs (15 kg)

Product Usage Instructions

1. Before using the product, please read and save these instructions.
2. Ensure you observe all safety information, warnings, and cautions provided in the user manual to protect yourself and others from personal injury or damage to the product or property.
3. Assemble the product by following the assembly instructions provided separately.
4. Please note that screws and tools for wall mounting are sold separately.
5. Ensure that the product is used within the specified load capacity limits. The total load capacity is 1929 lbs (875 kg), and the load capacity per shelf is 386 lbs (175 kg).
6. Avoid modifying the product without the consent of AREBOS, as it may void the warranty.
7. If you have any questions or need assistance, please contact our customer service number: +49 (0) 931-45232700.

For disposal instructions and more information about the product, refer to the imprint section on our website: https://www.arebos.de/impressum/

Please follow all security measures in this user´s manual to ensure secure use.

User’s Manual – AREBOS 2x Heavy Duty Shelf 875 kg Please read and save these instructions. Read through this user’s manual carefully before using the product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to the product or property. Please retain instructions for future reference.

Safety Instructions

General safety instructions

• Read the operating instructions carefully before use.
• Save them for future reference.
• The maximum spot load is 386 lbs (175 kg) per shelf.
• The weight must be evenly distributed on the shelves.
• Make sure not to exceed the maximum spot load per shelf or for the whole unit.
• Do not place the unit in a room that is very humid because this could damage the shelves.
• Wear safety gloves when assembling the unit.
• Anchor the unit with a suitable wall bracket.
• Note: Make sure not to drill into water pipes or electric cables.
• If the connector tabs of the shelf cross pieces should bend on assembly, they can be bent back into their original position with the aid of a flathead screwdriver.

Technical Specifications

Assembly

Before Assembly

• Remove all packaging material and check that all the parts are included.
• Check the product for transport damage before assembling.
• Assemble the product on a clean and level surface (e.g. carpet) to avoid damage.
• Use a rubber mallet to avoid damaging the material.
• Place the unit on a level surface. Otherwise, this will compromise the safety or the maximum supporting capacity.
• Only use plugs and screws suitable for the type of wall and weight of the shelves. Plugs, screws, and tools for wall mounting are sold separately.
• Exclusion of liability: There is no liability – also not for secondary damage – if the bug was caused in order by wrong or unintended installation.

Parts

Installation

• Assemble the first shelf support as shown in the diagram. For this fix two of the girders C and D at the corner pieces (B).
• Fix the shelf support in the middle of both girders and bend the connector tabs, so the support cannot move out anymore.
• Connect each of the corner pieces (B) with one other by using the included couplers (F).
• Place the shelves (A) on each level.
• Fit the plastic feet (G) on the top and bottom ends of the corner pieces.

Disposal Instruction

Disposal of the packaging
Please make reference to the guidelines and standards for appropriate disposal of the packaging valid in your region. In part, the package may consist of plastic bags – watch this respect, with special care to ensure that this is not out of the reach of children. There is a risk of suffocation!

Disposal of waste equipment

• Equipment must be disposed of in accordance with the rules and regulations of the local waste disposal.
• At the end of the long life of your article, please dispose of the valuable raw materials for proper disposal so that proper recycling can take place.
• If you are not sure how to proceed, the local waste disposal companies or recycling centers are happy to help.

Imprint

• Name of the product: 2x Arebos Heavy Duty Shelf 875kg
• Model Nr.: AR-HE-SW30
• Art. Nr.: 4260627422494
• If this product is modified without our consent, it loses the right to any warranty.
• Tested acc. to:
• EU standard:
• PPP 51028B:2014
• AfPS GS 2014:01 PAK

Date/Manufacturer Signature/Location: Würzburg, 19.12.2019

Identification of the signatory
Dipl.-Inform. (Univ.) Korhan Canbolat, head of the company Authorised representative for the technical documentation:
Korhan Canbolat
Office address:
Canbolat Vertriebs GmbH
Gneisenaustraße 10-11
D-97074 Würzburg

The return address can be found in the imprint: https://www.arebos.de/impressum/
VAT identification number: DE 263752326 The court of the Commercial Register is Würzburg, HRB 10082 WEEE Reg.-No. DE 61617071

References

• Englisch ⇔ Deutsch - leo.org: Startseite
• Englisch ⇔ Deutsch - leo.org: Startseite
• Englisch ⇔ Deutsch - leo.org: Startseite
• Impressum

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>