Xibu C1/C2 L1/L2 H1/H2 SPL Washrooms sense TAP PROFI Installation Guide
- June 13, 2024
- Xibu
Table of Contents
Xibu C1/C2 L1/L2 H1/H2 SPL Washrooms sense TAP PROFI Installation Guide
Assembly Instruction
chrom (Typ 1100 B/N, 1110 B/N, 1120 B/N)
matt (Typ 1200 B/N, 1210B/N, 1220B/N)
inox (Typ 1400 B/N, 1410 B/N, 1420 B/N)
C1/L1/HA
1 = Batterie/battery
6V Lithium
CR-P2, DL 223A
Cc1/L2
C2/L2/H2
1 = Adapter
AC230V/6V
Installation Instructions
-
ci/c2
-
L1/l2
-
H1/H2
-
C1/LA/H1
-
C2/L2/H2
Operation:
Automatic range adjustment
-
**** Before electrical connection or insertion of batteries pay attention that the corner valves are open.
Do not hold your hands in front of the armature until the adjustment of the sensor range!
-
10-15 sec. after electronic operation water will run and the range of the sensor will adjust automatically to the distance of the water jet.
Function test -
Hold your hands towards the area of the water jet/drain.
- Water is running: OK
- Water is not running: see chart below.
Important notice:
- Follow standards, guidelines and regulations of the country and the local water works!
- Installation only in frost-proof rooms!
- Installation only by skilled expert staff.
| Error | Reason | Solution |
|---|---|---|
| Water |
- Corner
- Main water tap closed
- Electrical
- Sensor
- Magnet
|
- Open corner valves
- Open main water tap
- ctivate electrical supply
- Contact/call service
- Unfasten magnet valve and blow
Water Is only not running low|
- Filter screens contaminated
- Aerator contaminated/calcified
|
- Clean filter screens
- Clean/decalcify aerato
Water is running permanently|
- Magnet valve broken
|
- Close comer valves and contact/call service
- Unfasten magnet valve and blow out (clean)
ED display (sensor) flashes|
- Empty battery
|
- Close comer valves and | IMITFN | change battery
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>