Libratone Classic Zipp Wi-Fi/Bluetooth User Manual
- June 13, 2024
- LIBRATONE
Table of Contents
Libratone Classic Zipp Wi-Fi/Bluetooth
USER MANUAL
QUICK GUIDE LIBRATONE ZIPP
AIRPLAY
BLUETOOTH
DLNA
CUSTOMIZE YOUR AUDIO EXPERIENCE WITH THE LIBRATONE APP
Download the free Libratone App to customize your FullRoom™ experience with Libratone speakers. Provide it with information on the placement of your sound system and the app automatically adjusts the settings on your Libratone speakers to match the specifications of the room.
Go get it at App Store or Google Play.
QUICK AIRPLAY SETUP
iOS 7 or later
Full manual and warranty sheet on libratone.com
1. Press the Logo Button to turn the speaker on
2. Connect your speaker and iOS device with a USB cable.
3. Press both buttons simultaneously for “Share Wi-Fi Settings?” to pop up.
4. Press “Allow” and wait for the speaker to restart. Remove cable afterwards
5. Swipe up from the bottom of the display to enter “Control Center” and press “AirPlay”.
6. Choose your speaker.
7. Choose your favorite music player and set your music free!
FREE COVER
Register your speaker on libratone.com/freecover and get a free cover in your favorite color
AirPlay is a trademark of Apple Inc., registered in the US and other countries
QUICK BLUETOOTH SETUP
Bluetooth® devices
Full manual and warranty sheet on libratone.com
1. Press the Logo Button to turn speaker on.
2. Press and hold the Bluetooth Button for two seconds until the Logo Button emits a blue sequence.
3. Unlock your NFC (Near Field Communication) phone or tablet and hover over the Logo Button …
4. … OR connect to the speaker through the “Bluetooth settings” menu.
5. Choose your favorite music player and set your music free!
FREE COVER
Register your speaker on
libratone.com/freecover and get a free cover
in your favorite color.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Libratone A/S is under license.
QUICK DLNA SETUP
Android / PC
Full manual and warranty sheet on libratone.com
1. Press the Logo Button to turn speaker on.
2. Press and hold the Wi-Fi button for two seconds until the Logo Button
pulses white.
When it emits a white sequence (takes up to 20 seconds) it’s ready
3. Open “Wi-Fi settings” and connect to the speaker’s network.
4. Open a browser and type “192.168.1.1” and follow the Wi-Fi setup instructions.
5. Wait for your speaker to restart. The Logo Button breathes white when ready.
6. Open a DLNA Music Player. Select your speaker and press play to set your music free.
FREE COVER
Register your speaker on
libratone.com/freecover and get a free cover
in your favorite color.
DOWNLOAD
Libratone Classic Zipp Wi-Fi/Bluetooth Quick Start Guide – [Download PDF]
Libratone Classic Zipp Wi-Fi/Bluetooth User Manual – [Download PDF]