MAGEWELL AES67 Pro Convert Device User Guide
- June 13, 2024
- MAGEWELL
Table of Contents
PRO CONVERT
AES67
Quick Start Guide
© 2022, Nanjing Magewell Electronics Co., Ltd. All rights reserved.
Packing List
1 x Pro Convert Device
1 x Quick Start Guide
1 x L bracket
1 x SV/2.1A power adapter
1 x 4.4mm to Dual XLR Male Cable
1 x 4.4mm to Dual XLR Female Cable
Interfaces and indicators
Get started
-
Connect cables.
1. Connect the device to your computer using the USB cable. It provides USB Network and USB AUDIO IN/OUT.
2. Connect the device to the Ethernet network with an Ethernet cable. It provides Ethernet and AolP codecs – NDI, SRT, Icecast and AES67.
3. Connect analog audio, including 3.5mm unbalanced and 4.4mm balanced IN/OUT. -
Log in to the Web GUI.
1. Type the USB NET IP address 192.168.66.1 in your web browser.
2. Log in with the default case-sensitive username and password (both Admin). You are suggested to change the password after the initial log-in. -
Set up the device. After logging in successfully,
1. specify Sample rate in Global Settings tab. The value should be the same as that of AES67 sink.
2. add audio conversion sessions in related tabs and specify settings for your tasks.
3. set audio mixing matrix in the Matrix tab. Note: The AolP channels will not appear in the Routing matrix if the source/sink has NOT been added and enabled.
Warranty
The duration of the free limited warranty is two (2) years for the Pro Convert
family and one (1) year for the accessories. For detailed warranty
information, refer to www.magewell.com/quality-
assurance
This guide is for reference only and does not constitute any form of
commitment. Products and product features (including but not limited to color,
size, screen display, etc.) are subject to change without notice and are as
found on the actual product.
Technical Support
If you have any problems using Magewell products or need more technical
information, please submit your questions in the online Ticket System
(tickets.magewell.com).
Subscribe and Like Us!