SG Lighting Zip 230V 1 Circuit Rail System Instruction Manual
- June 13, 2024
- SG Lighting
Table of Contents
SG Lighting Zip 230V 1 Circuit Rail System
Product Information
- Product Name: Zip 230V
- IP Rating: IP20
- Input Voltage: 220-240V
- Maximum Current: 10A
- Dimensions: 1150mm x 2000mm
- Number of Sheets: 2
- Revision: 02.05.2022
- Maximum Power: 6.5W
- Lamp Type: GU10
- Frequency: 50-60Hz
Product Usage Instructions
- Ensure that the input voltage is within the range of 220-240V.
- Connect the Zip 230V to a suitable power source using the provided central connector.
- Make sure the product is installed in a location with an IP20 rating to protect it from solid objects larger than 12mm.
- Insert a GU10 lamp with a maximum power rating of 6.5W into the designated socket.
- Turn on the power source to activate the Zip 230V.
- Check that the product is functioning properly and emitting light.
- If any issues arise, refer to the user manual for troubleshooting steps or contact the manufacturer’s support for assistance.
Please note that these instructions are a general guideline, and it’s important to refer to the specific user manual provided with the product for detailed instructions and safety precautions.
Mounting Instruction
NORWAY
SG Armaturen AS
Skytterheia 25
N-4790 Lillesand
Tel: +47 37 50 03 00
www.sg-as.no
SWEDEN
SG Armaturen AB
Tel: +46 31 81 71 10
info@sg-ab.se
www.sg-ab.se
FINLAND
SG Armaturen Oy
Tel: +358 02 07 30 39 60
www.sg-oy.fi
DENMARK
SG Armaturen A/S
Tel: +45 70 70 72 13
info@sg-as.dk
www.sg-as.dk
UNITED KINGDOM SG Lighting LTD
Tel: +47 37 50 03 00
info@sglighting.co.uk
www.sglighting.co.uk
FRANCE
SG Lighting SA/NV
Tel: +33(0) 4 94 93 00 00
info.france@sglighting.fr
www.sglighting.net
BENELUX
SG Lighting SA/NV
Tel: +32(0) 15 20 72 71
info.benelux@sglighting.net
www.sglighting.net
GERMANY
SG Leuchten GmbH
Tel: +49 40 23 99 44 59
info@sg-leuchten.de
www.sg-leuchten.de
INTERNATIONAL
SG Lighting Co Ltd.
Tel: +86 769 88 49 20 88
cindy@sgdgcn.com
www.sg-as.com
- Only to be installed and maintained by an authorized electrician.
- Turn off power before installing.
- It is the user’s responsibility to ensure electrical, mechanical and thermal compatibility between the track system and luminaires attached to it.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>