VISUAL COMFORT BBL 3611 Aida Large Table Lamp Instruction Manual

VISUAL COMFORT BBL 3611 Aida Large Table Lamp

Product Information

The Aida Large Table Lamp Item # BBL 3611 is a light fixture that requires assembly. It is important to install this lamp in accordance with all applicable local installation codes and by someone familiar with its construction and operation. The lamp should be inspected for any damage or defects before installation.

The lamp comes with the following parts:

• A – Finial
• B – Shade (packaged separately)
• C – Harp
• D – Socket ring
• E – Socket
• F – Protective cover for plug

Please note that the bulb is not included with the lamp.

Product Usage Instructions

Tools Required: Scissors (not included)

1. Remove all parts from the box and place them on a clean, soft surface.
2. Take out the socket ring (D) from the socket (E).
3. Attach the harp (C) to the socket (E) and secure it with the socket ring (D).
4. Remove the finial (A) from the harp (C).
5. Unpack the shade (B) and install it onto the harp (C) using the finial (A). If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damages.
6. Install a light bulb into the socket.
7. Remove the protective cover (F) from the plug.
8. Plug the lamp into an electrical outlet and test the fixture.

Care Instructions: Clean the lamp only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Important: This lamp is listed and approved for use in the United States.

ASSEMBLY INSTRUCTIONS

• Aida Large Table Lamp
  • Item # BBL 3611

NOTICE

• This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved.
• Inspect item and contents carefully. If any damage or defect is found, do not install.
• Retain all packaging material until installation is complete and approved.

TOOLS REQUIRED

(NOT INCLUDED):

Scissors

1. Carefully remove all parts from the box. Place on a clean, soft surface.

2. Remove socket ring (D) from socket (E).

3. Install harp (C) to socket (E) and secure with socket ring (D).

4. Remove finial (A) from harp (C).

5. Remove shade (B) from packaging and install to harp (C) using finial (A).
   NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages.

6. Install light bulb into the socket.

7. Remove protective cover (F) from the plug.

8. Plug into electrical outlet and test fixture.

Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>