Arlux LIGHTING ARL114174 Dita Right Interior Wall Light Instruction Manual
- June 12, 2024
- Arlux LIGHTING
Table of Contents
Instructions for use
ARL114174 Dita Right Interior Wall Light
DITA
Average efficiency in active mode
Low load efficiency (10%)
Power consumption without load
| | | | |
---|---|---|---|---|---
3297021141714| 5+3W| > 80| IP 20| 230V| 25x12x18 cm
3297021141745| 5+3W| > 80| IP 20| 230V| 25x12x18 cm
| Electrical products must not be thrown out with domestic waste. They must be
taken to a communal collecting point for
---|---
****| Product conforms to European Union Directives
| For indoor use only
| Not compatible with a dimmer
| Live: brown wire
| Neutral: blue wire
| Earth: green/yellow wire
| Light source replaceable by a professional (LED only)
| Power supply replaceable by a professional
ref.999006| This product contains a light source of energy class G.
ref.999008| This product contains a light source of energy class G.
General safety instructions
- The product must be installed by an electrician or any other qualified person and in accordance with the standards in force in the country of installation. To carry out the installation or any maintenance or servicing work, disconnect the power from the electrical network.
- Do not look directly at the light source.
- Never touch the product when it is in operation, or when it has just been switched off.
- Do not use adamaged or modified power cord to avoid any risk of fire or electric y shock.
- Before use, make sure that the product has not been damaged. If deterioration is observed, do not use the product.
- The flexible exterior cable or cord of this fixture cannot be replaced. If the cable 1 is damaged, the luminaire must be recycled.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>