iSTA BREEZE PRO 1.5KW 24V Charge Controller Instructions
- June 12, 2024
- iSTA BREEZE
Table of Contents
iSTA BREEZE PRO 1.5KW 24V Charge Controller
Product Information
- Brand: EarthSafe
- Model: .:9352.:9352&+$5*(&21752//(5
- Description: This product is a versatile and convenient solution for various tasks. It is designed to provide efficient and reliable performance in a user-friendly manner. The EarthSafe product is known for its durability and ease of use.
Product Usage Instructions
- Before using the product, make sure to read the entire user manual for proper understanding and safe operation.
- Connect the EarthSafe product to a power source using the provided power cord.
- Ensure that the power switch is in the “Off” position before plugging in the product.
- To turn on the EarthSafe product, move the power switch to the “On” position.
- For specific tasks, refer to the corresponding sections of the user manual for detailed instructions.
- When using the product, follow all safety precautions mentioned in the user manual.
- After use, turn off the EarthSafe product by moving the power switch to the “Off” position.
- Unplug the power cord from the power source.
- Clean and maintain the EarthSafe product according to the instructions provided in the user manual.
Note: For any troubleshooting or further assistance, please refer to the troubleshooting section of the user manual or contact our customer support.
INSTRUCTIONS
1.5KW 24V PRO / 2KW 48V PRO CHARGE CONTROLLER
1.5Kw 24v and 2Kw 48v is a new generation Pro Charge Controller. This
device is not hybrid but it can be integrated into a hybrid system, (the
important thing is a suitable battery and a suitable system). The solar
chargers and Wind chargers can be connected parallel to the same battery
group. The high-end device can also be used as a monitoring system. It is used
to safely and efficiently charge and control your battery with the Wind
Generator. With its discreet appearance, simple operation, with integrated
protection functions, this device has high efficiency and low no-load losses.
This version of the controller will significantly increase the life and
stability of the whole system, especially the batteries.
In addition, the control electronics in the control cabinet monitor the system voltage and brake the wind turbine when a max. Overvoltage. The special features and product information are listed below: Use of external and high quality (Triacs), ssolid-statecomponents. Increasing the life of the controller. Microprocessor-controlled charge with integrated voltage and current limiting. Electromagnetic brake control.integrated 3-phase short circuit breakers (brake switch) Protection against lightning strikes. Protection against overcharging, deep discharge, short circuit, and overload. Integrated display.
The generator is automatically braked gently when the battery is full, modern braking system with external load resistance (Dump Load) to avoid the immediate blocking of the turbine. Increasing the life of the stator.
CHARGE CONTROLLER
**
**
Reset Button:
This button deactivates when the generator is on the automatic brake
Manuel Brake Button:
- For manual brake, please press “off’ Imode
- For operation, please press “on” mode
Generator On / Off Switch :
After the generator stops (after manual brake), please press mode I (off), and
the generator is locked. (Safe braking is achieved in this way) For active
operation, please press mode O (on) and then close the manual brake button
Lcd Display:
Amper (Ampere), Güc (Watt), Akü (Battery Voltage), Fren (Brake), Temp
(Temperature)
HOW TO CONNECT SERIES
Documents / Resources
| iSTA
BREEZE PRO 1.5KW 24V Charge
Controller
[pdf] Instructions
1.5KW 24V PRO, 2KW 48V PRO, PRO 1.5KW 24V Charge Controller, PRO 1.5KW 24V,
Charge Controller, Controller, PRO 2KW 48V
---|---