niko 510-50000 Internal Video Unit for 2-Wire-Based Access Control Systems Installation Guide
- June 12, 2024
- niko
Table of Contents
niko 510-50000 Internal Video Unit for 2-Wire-Based Access Control
Systems
Product Information
- Article number: 510-50000
- Wiring technique: 2-wire
- Circuit breaker: IP20 – Wire capacity: 115-1400 mm
- Screen resolution: 7B 8B 1B0B 9B – Screen size: 179 x 26.75 mm
- Mounting method: Manual Ambient temperature
- Dimensions (HxWxD): Product Usage Instructions: Installation
- Follow the wiring technique for a 2-wire setup.
- Mount the internal video unit using the manual provided.
- SettingsNo specific settings are mentioned in the user manual.
- Troubleshooting Problem
Possible causes: They do not disturb
The function is activated on the internal video unit and/or app, incorrect
wiring, no internet connection, or other causes. Proposed solution: Turn off
the do not disturb function, check the wiring scheme, check the internet
connection, or press the reset button on the access control module and
reconfigure all devices.
Note: The user manual provides troubleshooting instructions in multiple
languages, including English, Danish, Polish, Dutch, Swedish, Slovak, German,
and Italian.
Internal video unit for 2-wire-based access control systems
Installation
POWER – OFF
Micro SD-card
Specifications
- Article number 510-50000
- Wiring technique 2-wire
- Circuit breaker maximum MCB rating 16 A*
- Wire capacity 0,25 – 1,5 mm²
- Screen resolution 1024 x 600
- Screen size 7”
- Mounting method surface-mounted
- Ambient temperature 0 °C – +40 °C
- Colour Black
- Dimensions (HxWxD) 115 x 179 x 26,75 mm
- Protection degree IP20
The MCB rating is limited by national installation rules
Wiring! POWER – OFF
Dimensions
Troubleshooting
- Problem Possible cause Proposed solution
- The internal video unit and/or the app does not react
- When the bell button is pressed
- The “do not disturb function” is activated on
- The internal video unit and/or app
- Turn off the “do not disturb” function
- The wiring is not correct Check the wiring scheme
- No internet connection Check the internet connection
- Other cause Press the reset button on the access control module and reconfigure all devices
- The internal video unit does not respond
- The wiring is not correct Check the wiring scheme
Warnings regarding installation
The installation of products that will permanently be part of the electrical
installation and which include dangerous voltages should be carried out by a
qualified installer and in accordance with the applicable
regulations. This user manual must be presented to the user. It should be
included in the electrical installation file and it should be passed on to any
new owners. Additional copies are available on the Niko website or via Niko
customer services.
CE marking
This product complies with all of the relevant European guidelines and regulations. For radio equipment, Niko LLC declares that the radio equipment in this manual conforms with the 2014/53/EU directive. The full text of the EU Declaration of Conformity is available at www.niko.eu under the product reference, if applicable.
Environment
This product and/or the batteries provided cannot be disposed of in non-
recyclable waste. Take your discarded product to a recognized collection
point. Just like producers and importers, you too play an
important role in the promotion of sorting, recycling, and reuse of discarded
electrical and electronic equipment. To finance the rubbish collection and
waste treatment, the government levies recycling charges in certain cases
(included in the price of this product).
Support & contact
nv Niko sa Industriepark West 40
9100 Sint-Niklaas, Belgium
www.niko.eu +32 3 778 90 80
support@niko.euNiko prepares its manuals with the
greatest care and strives to make them complete
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>