VISUAL COMFORT KW5071 AI Strada Medium Round Chandelier Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
KW5071 AI Strada Medium Round Chandelier
Product Information
The Strada Medium Round Chandelier, item # KW 5071, is a stylish
and elegant light fixture designed to enhance the ambiance of any
space. This chandelier requires bulbs (not included) for
operation.
It is important to note that this light fixture should be
installed in accordance with all applicable, local installation
codes. The installation should be carried out by a person familiar
with the construction and operation of the fixture, as well as the
associated hazards. Prior to installation, carefully inspect the
item and its contents for any damage or defects. If any issues are
found, do not proceed with the installation. Retain all packaging
material until the installation is complete and approved.
Tools required for assembly, such as a Phillips screwdriver,
slotted screwdriver, wire cutters, wire strippers, and measuring
tape, are not included with the product.
Product Usage Instructions
-
Begin by carefully removing all parts from the box and placing
them on a clean, soft surface. -
It is recommended to install a 1/4 IPS threaded pipe (not
provided) secured to a suitable ceiling junction box. -
Follow Diagram 1 to identify the various components (A, B, C,
etc.) mentioned in the instructions. -
Connect the white wire from the bottom half ball (M) to the
white wire from the top half ball (J) using the provided wire nut
(R). -
Install the bottom half ball (M) onto the threaded tube (L) and
secure it with the branch (O) and hex nut (P) using the provided
wrench (S). -
Thread the branch (Q) to the bottom of the threaded tube
(L). -
Install the bulbs (not included) into the sockets.
-
Determine the desired overall length and amount of chain (F)
needed. Shorten the chain using chain pliers and keep any extra
chain. -
Attach the chain (F) to the collar loop (C) and fixture loop
(H) using the provided quick links (G). Secure the quick links
(G). -
Thread the fixture wire, ground wire, and safety cable through
the chain (F). -
Connect the fixture ground wire (bare copper) to the supply
ground wire (usually green or bare copper) using the provided wire
nut (A). Ensure proper grounding of the fixture. -
Connect the fixture neutral wire (white) to the supply neutral
wire (usually white) using the wire nut (A). -
Connect the fixture hot wire (black) to the supply hot wire
(usually black) using the wire nut (A). Take caution not to reverse
the hot and neutral connections. -
Ensure all wire connections are tight and tuck them into the
junction box. -
Install the canopy (D) onto the collar loop (C) and secure it
with the collar ring (E).
Following these instructions will help ensure a safe and
successful installation of the Strada Medium Round Chandelier.
Enjoy your new lighting fixture!
ASSEMBLY INSTRUCTIONS
Diagram 1
1/4 IPS Pipe (Not provided) A
B
C G
D E
F
G
H
N1 I
J
N2 K
R
L
M
Bulbs (Not included) I O P Q
S
Strada Medium Round Chandelier
Item # KW 5071
NOTICE: This light fixture should be installed in accordance with all
applicable, local installation codes, and by a person familiar with the
construction and operation of it, as well as the hazards involved. Inspect
item and contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED):
Phillips Screwdriver
Slotted Screwdriver
Wire Cutters
Wire Strippers
Measuring Tape
1. Carefully remove all parts from the box. Place on a clean, soft surface.
2. It is recommended to install a 1/4 IPS threaded pipe, secured to a
structural member of the building (not included). Then install threaded tube
(B) into receiver and tighten with wrench. NOTE: Item must be supported
independent of the junction box due to hanging weight. 3. Remove collar loop
(C) from chain (F) and secure to threaded receiver attached to structural
member by tightening locknut. 4. Install canopy (D) to collar loop (C) and
secure with collar ring (E). 5. Attach branch (I) to the top half ball (J) and
secure with hex nut using provided wrench (N2). 6. Attach branch (K) to the
top half ball (J) and secure with hex nut using provided wrench (N1). NOTE: It
is important to let all branch (K) assembled and even distribution, then
tighten it by wrench. 7. Attach branch (I) to the bottom half ball (M) and
secure with the hex nut using provided wrench (N2). 8. Connect the black wire
from the bottom half ball (M) to the black wire from the top half ball (J)
using wire nut (R) .
M
L I ST ED
US
ASSEMBLY INSTRUCTIONS
Diagram 1
1/4 IPS Pipe (Not provided) A
B
C G
D E
F
G
H
N1 I
J
N2 K
R
L
M
Bulbs (Not included) I O P Q
S
Strada Medium Round Chandelier
Item # KW 5071
NOTICE: This light fixture should be installed in accordance with all
applicable, local installation codes, and by a person familiar with the
construction and operation of it, as well as the hazards involved. Inspect
item and contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
9. Connect the white wire from the bottom half ball (M) to the white wire
from the top half ball (J) with the wire nut (R) .
10. Install the bottom half ball (M) to threaded tube (L) and secure with
branch (O) and hex nut (P) using provided wrench (S).
11. Thread branch (Q) to the bottom of threaded tube (L). 12. Install bulbs
(not included) into the sockets. 13. Determine desired overall length and
amount of chain (F) needed.
Shorten chain using chain pliers. (Keep extra chain) 14. Attach chain (F) to
collar loop (C) and fixture loop (H) using quick
links (G). Secure quick links (G). 15. Thread fixture wire, ground wire and
safety cable through chain (F).
NOTE: When you reach the collar loop (C), ensure there is no tension on the
wires. Cut excess wires, being sure to leave about 12″ to reach the junction
box. 16. Separate two sides of molded wire and strip insulation on each 5/8″.
17. Loosen collar ring (E) and let canopy (D) slip down chain (F) carefully.
18. Twist all fixture wires together. Slip through center hole of collar loop
(C). NOTE: Untwist wires and separate to prepare for connection. 19. Loosen
cable lock and install to end of safety cable. Run safety cable through
junction box and around structural member of building. Insert cable through
cable lock and tighten the ends with a screwdriver to secure. (See diagram 1)
M
L I ST ED
US
ASSEMBLY INSTRUCTIONS
Diagram 1
1/4 IPS Pipe (Not provided) A
B
C G
D E
F
G
H
N1 I
J
N2 K
R
L
M
Bulbs (Not included) I O P Q
S
Strada Medium Round Chandelier
Item # KW 5071
NOTICE: This light fixture should be installed in accordance with all
applicable, local installation codes, and by a person familiar with the
construction and operation of it, as well as the hazards involved. Inspect
item and contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
20. Connect fixture ground wire (bare copper) to the supply ground wire
(usually green or bare copper) using wire nut (A). NOTE: It is imperative that
the fixture is grounded.
21. Connect fixture neutral wire (white) to the supply neutral wire (usually
white) using wire nut (A).
22. Connect fixture hot wire (black) to the supply hot wire (usually black)
using the wire nut (A). CAUTION: Do not reverse the hot and neutral
connections.
23. Make sure all wire connections are tight and tuck into the junction box.
24. Install canopy (D) to collar loop (C) and secure with collar ring (E).
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not
use abrasive or chemical agents.
M
L I ST ED
US
ASSEMBLY INSTRUCTIONS
Strada Medium Round Chandelier
Item # KW 5071
NOTICE: This light fixture should be installed in accordance with all
applicable, local installation codes, and by a person familiar with the
construction and operation of it, as well as the hazards involved. Inspect
item and contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
For a more personalized style you are able to gently bend spines in any
direction. NOTICE: BENDING SPINES MULTIPLE TIMES CAN CAUSE THEM TO BREAK
M
L I ST ED
US
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>