iclever BTH03 Wireless Headphone User Manual
- June 12, 2024
- iclever
Table of Contents
iclever BTH03 Wireless Headphone
Product Information :
Product Name : Unknown
Product Model: Unknown
Product Size : 80x100mm Product
Usage Instructions
- Connect the charging cable to the USB interface of the product.
- Plug the other end of the charging cable into a power source.
- Wait for the product to charge fully.
- Once charged, disconnect the charging cable from the product
- To make a phone call, locate the phone call button on the product.
- Press the phone call button to initiate a phone call.
- To end a phone call, press the phone call button again.
- If the product is damaged, stop using it immediately.
- If the charging cable USB interface becomes hot, replace it promptly.
- Keep the product away from high temperatures and fire sources.
Please Note: The provided text does not contain complete or clear
information about the product.
Therefore, specific usage instructions and detailed information about the
product’s features and functions cannot be provided accurately.
What’s in the box
- 1 x iClever BTH03 Headphones
- 1 x Charging Cable
- 1 x 3.5mm Audio Cable
- 1 x User Manual
Overview
Illustration
LED Indicator Instruction
Bluetooth Connection
- Turn On The Headphones
Note: The headphones will automatically enter pairing mode when being switched on for the first time.
Connect to Bluetooth Device
Music Control
Phone Call
Specifications
-
Premium 40mm Dynamic Driver
-
Frequency Respense :20Hz – 20KHZ
-
Support: BT5.0,A2DPV1.2,AVRCPV1.5,HFPV1.5,HSPV1.2
-
Bluetooth transmitter
frequency range:2.402-2.480GHZ -
Bluetooth transmitter modulation: GFSK / 4DOPSK / 8DPSK
-
Battery type : Lithiumion Polymer(3.7V,500mAh)
-
Lithium Battery Energy Content: 1.85 Wh
-
Battery charge time <2hrs
-
Music play time 25hrs
-
Weight: 0.16kg
-
Maximum transmission power 8dBm
Warning
- If the product is damaged, please stop using it
- When the charging cable USB interface is hot, please replace it in time
- Keep away from high temperature and fire source
FCC Statement
Change or configurations not expressly approved oy the party responsible for compliance could void the user’s authentic to 0perate the equipment .
This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to Part 1 5 of the FCC Rules. These miners are destoned to provide reasonable protection against mannite interference in a residential installation. This equipment generates uses and can radiate radio frequency engroove and. no installed and used in accoroance with the instructions. may cause harmful interference to radio communications. However there is no guarantee mat interference will not sour in a particular installation. If this equioment does cause harmful interference to radio or television reception. which can be determined ov turning the equioment off and on, the user is encourages to try so correct the intemperance oy one os more of the following measures Connect the equipment into an outlet on a circuit different from that to vich the receiver is connected
- Consult the coaler re an experienced radio y technician for this
This device complies with part 15 o the FCC rule. Operation is sunspot to the following two conditions .
This device may not cause harmful interference. (This device must accept any interference received. including interference that may cause undesired operation.
IC Caution
This device complies with industry Canada licence-exempt RSS standardly.
Operation is subject to the following two conditions:
- This device may cause interference and
- This device must accept any interference, including interference that may cause undesired operation of the device.