waterpik WP-660EU Water Flosser User Manual
- June 12, 2024
- Waterpik
Table of Contents
waterpik WP-660EU Water Flosser
Using Mouthwash and Other Solutions
Your Waterpik® Water Flosser can be used to deliver mouthwash and antibacterial solutions. After using any special solution, rinse unit to prevent clogging by partially filling reservoir with warm water and running unit with tip pointed into sink until unit is empty.
Accessory Storage
Accessory tip storage for your two most frequently used tips is under the reservoir lid and can be easily accessed by removing the reservoir.
Cleaning
Before cleaning, unplug from the electrical outlet. Clean the product when necessary by using a soft cloth and mild non-abrasive cleanser. The water reservoir is removable for easy cleaning and is top rack dishwasher safe.
Removing Hard Water Deposits / General Cleaning
Hard water deposits may build up in your unit, depending on the mineral
content of you water. If left unattended, it can hinder performance. Cleaning
internal parts:
add 2 tablespoons of white vinegar to a full reservoir of warm water. Point
the handle and tip into sink. Turn unit ON and run until reservoir is empty.
Rinse by repeating with a full reservoir of clean warm water.
This process should be done every 1 to 3 months to ensure optimal performance.
Leakage
If leaking due to a damaged hose, please email
InternationalService@Waterpik.com
Still have questions? Email us at
InternationalService@Waterpik.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>