EIBENSTOCK ERC 350 Pipe Saw Instruction Manual

: June 12, 2024
: EIBENSTOCK

Table of Contents

EIBENSTOCK ERC 350 Pipe Saw
Product Information
Product Usage Instructions
DESCRIPTION
INDICATION OF USE
PRESENTATIONS
COMPOSITION
STORAGE CONDITIONS
DISPOSAL
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EIBENSTOCK ERC 350 Pipe Saw

EIBENSTOCK-ERC-350 Pipe-Saw-product-image

Product Information

Product Name: Pipe cutter ERC 350 Rated
Voltage: 230 V~
Power Input: 1250 W
Rated Current: 5.4 A Order
Number: 06652000
Frequency: Not specified
No-load Speed: Not
specified Max. Disc Diameter: Not specified
Spindle Connection: Not
specified Pipe Diameter : Not specified
Protection Class: Not
specified Degree of Protection: Not specified
Net Weight: Not
specified Interference Suppression: Not specified

Product Usage Instructions

Before operating the machine, read the user manual carefully.
Work with concentration and caution, keeping your workspace clean and avoiding potential hazards.
Take necessary precautions to protect yourself during operation: – Wear safety goggles. – Use a dust mask. – Wear protective gloves.
Wait for the diamond disc to reach full speed before starting the cutting process.
After completing the cutting process, allow the diamond disc to come to a complete stop before removing the pipe.
Do not apply lateral pressure on the diamond disc to brake the tool. 7.
Follow additional safety instructions provided in the attachment.
To turn on/off the machine, use the designated buttons labeled with “+” and “-“.
Connect a vacuum cleaner to the provided suction nozzle (4). 10. Lift the machine arm upwards and secure it using the locking bolt (5).
Immediately turn off the machine after completing the cutting process.
To change the cutting and abrasive discs, follow the reverse order of assembly. Tighten the hex screw counterclockwise.
Run the machine briefly in a secure position to ensure smooth operation of the tool. Stop working immediately if there is any irregularity in the running of the tool.
Follow environmental protection guidelines.
For any further information or assistance, contact Frank Markert, Head of Engineering. Please note that some technical specifications are not provided in the user manual extract. It is advisable to refer to the complete user manual for detail information on those specifications.

DESCRIPTION

longlass Photo is a light-cured glass ionomer composite. It is an ideal material for dental applications in cavity bases, pit seals, sealing of extended pits and restoration of small lesions. Its chemical composition allows high adhesive strength in enamel and dentin layers, besides presenting excellent resistance to bending and compression. longlass Photo is available in a single-component syringe, making it ideal and practical for handling in dental offices, in addition, its universal opaque pigmentation allows aesthetically desirable restorations.

INDICATION OF USE

longlass Photo is indicated for cavity bases in all restorative materials, sealing of extended pits and fissures and restoration of small lesions.

PRESENTATIONS

1 Syringe with 2,5 g and 5 application tips (available in Universal Opaque color).
1 Syringe with 5 g and 1 O application tips (available in Universal Opaque color).
2 Syringes with 2,5 g each and 10 application tips (available in Universal Opaque color).

COMPOSITION

Methacrylic monomers (TEGDMA, UDMA), initiators, co-initiators, preservatives pigments, fillers and glass ionomer powder.

MODE OF USE

Prepare the cavity according to the restauration technique that will be applied.
Wash and dry the tooth surface.
The operative field must be kept free of contamination. Use absolute isolation or effective relative isolation.
In very deep cavities it is recommended to use a calcium hydroxide-based liner.
Apply longlass Photo directly into the cavity using the applicator tip attached to the syringe barrel and light cure the product for 20 seconds (it is recommended to use photoactivation devices with at least 500 mW/cm2).
For cavity bases thicker than 1 mm, apply and cure in layers.
The light guide should be placed as close as possible to the surface (approx. 2 mm) where the material is to be applied.
For a larger distance, extend the polymerization time.
After use, discard the application tip to avoid contamination.
At the end of the use of the product, slightly retract the syringe barrel to avoid overflow of the product.

WARNINGS

Exclusive use of dental surgeon.
longlass Photo should not be used in case of known hypersensitivity (allergy) to any of the formulation’s components.
Do not use the product after its expiration date. For disposal, follow your country’s legislation.
Do not reuse the empty packaging.
Keep out of reach of children.
This material was manufactures for dental use only and must be handled according to the instructions for use. The manufacturer is not responsible for damage caused by other uses or by incorrect handling not described in this manual.

Furthermore, the user is obliged to verify, before use and under his/her own responsibility, if this material is compatible with the desired use, especially when this use is not indicated in this instructions for use.

PRECAUTIONS

longlass Photo adheres to some materials, such as temporary crown and bridge materials, methacrylate-based temporary restorations and certain impression materials (e.g., polyether), which may cause damage or even removal of the cavity base. Apply and adhesive in these cases.
Due to the extreme stability of longlass Photo after full polymerization, it is impossible to remove excess material with conventional probes at the risk of losing the cavity base. In such situations use a rotary device.
Products for pulp protection and dentin isolation should be thoroughly cured or dried before applying longlass Photo (follow instructions for use of these products) to avoid reducing dentin bonding.
As this is a light-curing material, the incidence of white light (e.g., operative light or sunlight) may cause partial activation. Therefore, after opening the syringe, apply the product as quickly as possible. And after application, close the packaging completely.
Materials based on eugenol or other phenolic substances (e.g., thymol) inhibit the polymerization of longlass Photo. Avoid combining longlass Photo with materials based on these components.
Insufficient curing time or light intensity may result in an incomplete reaction. Regularly check the condition of the lamp and light guide of the curing light.
Wear PPE when handling the product, including gloves and safety glasses. It is recommended that patients also wear safety glasses.
Absolute isolation of the operative field is recommended when handling this product, as loose objects can be accidentally swallowed or aspirated.
If there is pulp exposure in the region to be treated, previously promote the lining using adequate material. The application of the product directly on the dental pulp may cause irritation or irreversible damage (pulp necrosis).
Do not allow the product to come in contact with eyes, soft tissues or skin. In case of contact, wash immediately with plenty of water. If necessary, seek medical attention.
In case of allergic reactions, discontinue use immediately. If necessary, seek medical orientation.
Do not use product after expiration date.
Keep out of reach of children.
Single-use product.
Reprocessing forbidden.

CONTRAINDICATON
longlass Photo should not be used in case of known hypersensitivity (allergy) to any of the components of the formulation.

ADVERSE EFFECT
No adverse effects of the product have been identified until now. No side effects are expected if the product is used according to instructions.

STORAGE CONDITIONS

Store the product in its original packaging and in a clean and dry place.
Store longlass Photo tightly sealed, not exposed to light and at temperatures between 15 °C/59 °C and 25 °C/77 °F. In case of refrigerator storage, make sure that the material is at room temperature before application.

VALIDITY
The expiration date on the packaging represents the maximum time the product can be used. Do not use after the expiration date.