brighter LED Profile 200 RGBW User Manual
- June 12, 2024
- brighter
Table of Contents
brighter LED Profile 200 RGBW
PRODUCT INFORMATION
LED PROFILE 200 RGBW is an LED-based profile light with adjustable zoom. This product manual provides important information regarding the safe installation and use of this projector. Please read and follow these instructions carefully and keep this manual in a safe place for future reference.
User Manual
Please read the following instructions carefully before using the LED PROFILE 200 RGBW:
- Ensure that the power supply is compatible with the specifications mentioned in the manual.
- Before connecting the projector to the power source, make sure that the power switch is in the OFF position.
- Connect the projector to a suitable power outlet using the provided power cord.
- Once connected, turn on the power switch and wait for the projector to initialize.
- Use the zoom adjustment feature to set the desired beam angle for your lighting requirements.
- To control the color output, refer to the color mixing instructions provided in the manual.
- Ensure proper ventilation around the projector to prevent overheating.
- Do not expose the projector to extreme temperatures or moisture.
- When not in use, turn off the power switch and disconnect the power cord from the outlet.
- Refer to the troubleshooting section of the manual for any technical issues or concerns.
By following these instructions, you can safely install and use the LED PROFILE 200 RGBW projector.
This product manual contains important information about the safe installation and use of this projector. Please read and follow these instructio ns carefully and keep this manual in a safe place for future reference.
SPECIFICATION
- Power supply AC100V-240,50Hz/60Hz
- Power consumption 250W
- Lamp: led 200W,rgbw
- Lifetime of led: more than 50000 hours
- Dimmer: 0-100% linear dimmer
- Beam angle: 15° -28° (1321) ) /20° -45° (1322)
- Strobe 1-20 flash per second
- Heat dissipation: heat pipe with low noise fan
- LCD screen display
- Control mode: international standard DMX512 signal, with XLR 3PIN or XL 5PIN connectors
- Channel mode: 7 channels
- IP20
- Use environment temperature: -20°C-45 °C
- N.W.: 9.2Kgs
- G.W.: 11Kgs
- Dimensions(LXWXH): 790X315 X320mm
DESCRIPTION OF THE KEYS
- ESC;
- ENTER;
- DOWN;
- UP.
MENU
Important notice:
This equipment is dimming DMX512 signal priority, when the input signal, the
“ManDim” is invalid; as in the menu by light, please cut off the input DMX512
signal!
DMX PROTOCOL
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>