Jackery JS-200C SolarSaga 200 Solar Panel User Guide
- June 12, 2024
- Jackery
Table of Contents
Jackery JS-200C SolarSaga 200 Solar Panel User Guide
TECHNICAL PARAMETERS
SAFETY TIPS
- Do not bend or flex the folding solar panels.
- Do not place folding solar panels in shaded places, while tree shades, buildings, and any other obstructions to sunlight should be minimized.
- Do not soak the solar panels in water or other liquid.
- Do not clean the solar panel with water; please gently wipe it with a damp cloth.
- Do not use or store solar panels near open flames or flammable materials.
- Do not scratch the surface of solar panels with sharp objects.
- Prevent corrosive substances coming into contact with solar panels.
- Do not step on or place heavy objects on the solar panels.
- Do not disassemble the solar panels.
- The output circuit of the solar panels must be correctly connected to the equipment.
- Do not short-circuit the positive and negative poles of the panel.
- Ensure that there is no gap between the connector and the insulated connector as this may cause arcing or electrical shock.
- Check the connection status of each component carefully, including cables, wires and plugs.
CUSTOMER SERVICE
24 – month limited warranty
Lifetime technical support
hello.eu@jackery.com
HOW TO USE
Tips: To support the full range of Jackery portable power stations, we have introduced the power cable equip with a connector and adaptor.
- DC7909 connector: suitable for the 8.0 mm DC input port of Jackery portable power stations.
- DC7909-DC8020 adaptor: suitable for the 8.1mm DC input port of Jackery portable power stations.
• DC7909 Connector
- Unzip the carrying bag to take out the charging cable.
- Unplug the adaptor from the power cable.
- Connect the charging cable to the solar panel and the DC input port of the portable power station.
• DC7909-DC8020 Adaptor
- Unzip the carrying bag to take out the charging cable and plug it into the adaptor.
- Connect the charging cable to the solar panel(s) and the DC input port of the portable power station.
To Use Solar Generator Connector
- Unzip the carrying bag to take out the charging cable.
- Connect the two power cables to the two input ports of the solar generator connector.
- Plug the output port into the DC input port of the portable power station.
- To maximize the power generation efficiency, adjust the direction of SolarSaga 200 to make sure the solar panel is exposed to direct sunlight.
- Depending on the type of portable power station, the SolarSaga solar generator connector is available as an option or as standard. For details of the giveaways of the different portable power stations, please consult the Jackery website and User Manual.
WARRANTY
The product is covered by o limited warranty from Jackery for the original
purchaser that covers the product from defects in workmanship and materials
for 24 months from the date of purchase ( damages from normal wear and tear,
alteration, misuse, neglect, accident, service by anyone other than authorized
service center, or act of God are not included).
During the warranty period and upon verification of defects, this product will
be replaced when returned with proper proof of purchase.
FREQUENTLY ASKED QUESTIONS
Q: What kind of battery can be charged by these solar modules?
1. Jackery Explorer series 2. Sealed lead-acid battery 3. Colloidal lead-acid batteries 4. The open lead-acid batteries
Q: How to clean the solar surface?
Dust and dirt on the surface should first be removed using a soft brush. Use a damp cloth to wipe the surface of the solar module to remove any remaining dust or dirt. Any guano or other adhesive should be removed as soon as possible from the solar surface to avoid a reduction in performance.
Q: Are the foldable solar modules waterproof?
To Maximize the lifespan of the module, it should not get wet.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the
following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
MODIFICATION: Any changes or modifications not expressly approved by the
grantee of this device could void the user’s authority to operate the device.”
CONTACT US
For any inquiries or comments concerning our products, please send an email to hello.eu@jackery.com, and we will respond to you as soon as possible. If there is any quality related issue with the product, you may request a replacement or refund by submitting a request form at www.jackery.com/support/.
Manufacturer/Factory：Shenzhen Hello Tech Energy Co.,Ltd.
Jiaanda Science and technology industrial park,
the east side of Huafan Road, Tongsheng Community, Dalang Street,
Longhua District, Shenzhen, Guangdong, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>