DRAPER 74842 16 Inch Remote Controlled Wall Mounted Fan Instruction Manual

: June 12, 2024
: DRAPER

DRAPER 74842 16 Inch Remote Controlled Wall Mounted Fan

Product Information

Stock no. 74842. Part no. FAN7B.
Manufacturer: Draper Tools Limited
Website: drapertools.com
Product Helpline: +44 (0) 23 8049 4344
General Fax: +44 (0) 23 8026 0784

Introduction

This user manual provides instructions for the safe and effective use of the 16 Remote Controlled Wall Mounted Fan.

Revisions

Date first published: March 2017
Users should ensure they have the latest version of the user manual by checking the website drapertools.com/manuals.

Safety Content

WARNING: Information that draws attention to the risk of injury or death.
CAUTION: Information that draws attention to the risk of damage to the product or surroundings.
The copyright notice must remain intact in all cases.

Usage Instructions

Guarantee
Refer to the guarantee section for information on warranty coverage.
Introduction
This section provides an overview of the product and its specifications.
Health & Safety Information
This section contains general safety instructions and information on connecting the fan to the power supply.
Technical Description
This section provides identification details for the product.
Unpacking & Checking
Instructions for unpacking and checking the contents of the package are provided in this section.
Preparing the Fan
Instructions on assembling the protective blade grilles and mounting the fan to a wall can be found here.
Operating Instructions
This section covers the operation of the remote controller and provides guidance on using it to control the fan.

INSTRUCTIONS

These instructions accompanying the product are the original instructions. This document is part of the product, keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools policy of continuous improvement determines the right to make modifications without prior warning.

TITLE PAGE

INTRODUCTION:
USER MANUAL FOR:

16” REMOTE CONTROLLED WALL MOUNTED FAN
Stock no. 74842.
Part no. FAN7B.:
As our user manuals are continually updated, users should make sure that they use the very latest version.
Downloads are available from: http://www.drapertools.com/manuals

ABOUT COMPANY

DRAPER TOOLS LIMITED HURSLEY ROAD CHANDLER’S FORD EASTLEIGH HAMPSHIRE
SO53 1YF
UK
WEBSITE: drapertools.com
PRODUCT HELPLINE: +44 (0) 23 8049 4344
GENERAL FAX: +44 (0) 23 8026 0784

UNDERSTANDING THIS MANUALS SAFETY CONTENT:

WARNING! Information that draws attention to the risk of injury or death.
CAUTION! Information that draws attention to the risk of damage to the product or surroundings.

Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal & educational use only.
Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.

GUARANTEE

GUARANTEE

Draper products have been carefully tested and inspected before shipment and are guaranteed to be free from defective materials and workmanship.
Should the tool develop a fault, please return the complete unit to your nearest distributor or contact Draper Tools Limited, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF. England. Telephone Sales Desk: (023) 8049 4333 or Product
Helpline (023) 8049 4344.
A proof of purchase must be provided with the unit.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship, repairs will be carried out free of charge. This guarantee period covering parts/labour is 12 months from the date of purchase except where tools are hired out when the guarantee period is 90 days from the date of purchase. The guarantee is extended to 24 months for parts only. This guarantee does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless or unsafe handling, alterations, accidents, or repairs attempted or made by any personnel other than the authorised Draper warranty repair agent.
Note: If the unit is found not to be within the terms of warranty, repairs and carriage charges will be quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights. Draper Tools Limited.

INTRODUCTION

SCOPE
Wall mounted fan for circulating air, ideal for use in and around the home, office or workshop.

SPECIFICATION

Stock No : 74842
Part No: FAN7B
Rated voltage : 220-240V
Rated frequency: 50Hz
Rated input : 55W
Diameter Ø: 16″
Speed Settings: 3
Maximum Airflow: 65m3/min
Remote Control: 2 x 1.5V AAA ( Not Included)
Net Weight: 3.42kg

HANDLING & STORAGE

Take care when handling and lifting. Do not drop this machine.
Store in a dry location out of the reach of children.

HEALTH & SAFETY INFORMATION

GENERAL SAFETY INSTRUCTIONS
WARNING:
Please read the following instructions carefully, failure to do so could lead to serious personal injury. INSTRUCTIONS:
Drpaer Tools Limited recommends that this fan is not to be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you.

Keep out of reach of children.
Do not leave the fan running unattended.
Remove the plug from the socket before carrying out adjustment, servicing or maintenance.
Complete any assembly procedures prior to connection to the power supply.
Never insert fingers, pencils, or any other object through the protective grille, while the fan is running.
Disconnect the fan from the power supply when moving it from one location to the other.
Ensure that the fan is switched off from the supply mains before removing the guard.
Always complete the assembly of the fan before switching it on after cleaning.
Always ensure fan is correctly mounted to a secure surface able to take its weight and operational loads before operating.
Do not use fan near an open window, as rain can create an electrical hazard.
If the power supply cable becomes damaged, it should be replaced immediately.
If the replacement of the supply core is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard.
Do not use this fan with an externally connected speed control device.

CONNECTION TO THE POWER SUPPLY

Make sure the power supply information on the machine’s rating plate are compatible with the Power supply you intent to connect it to.
This fan comes supplied with a UK standard 3 pin plug. It is designed for connection to a Domestic power supply rated at 230V AC.
It is Class 2 (double insulated); is designed for connection to a power supply matching that detailed on the rating label and compatible with the plug fitted.
If an extension lead is required, use an approved and compatible lead rated for this appliance. Follow all the instructions supplied with the extension lead.
This product requires no earth connection as supplementary insulation is applied to the basic insulation to protect against electric shock in te event of failure to the basic insulation.

TECHNICAL DESCRIPTION

IDENTIFICATION

Mode setting
Swing button
Speed
On/off button
Timer

UNPACKING & CHECKING

PACKAGING

Carefully remove the fan from the packaging and examine it for any sign of damage that may have happened during shipping. Lay the contents out and check them against the parts shown below. If any part is damaged or missing; please contact the Draper Helpline (the telephone number appears on the Title page) and do not attempt to use the tool.
The packaging material should be retained at least during the guarantee period: in case the machine needs to be returned for repair.
Warning! Some of the packaging materials used may be harmful to children. Do not leave any of these materials in the reach of children.
If any of the packaging is to be thrown away, make sure they are disposed of correctly; according to local regulations.

WHATS IN THE BOX?
As well as the fan; there are several parts not fitted or attached to it.

DRAPER-74842-16-Inch-Remote-Controlled-Wall-Mounted-Fan-
fig-4

7. Rear protective grille
8. Front protective grille
9. Fan blade
10. Fan motor
11. Fan pivot point
12. Power lead
13. Wall mounting bracket and screws
14. Securing clip

PREPARING THE FAN

ASSEMBLING THE PROTECTIVE BLADE GRILLES

DRAPER-74842-16-Inch-Remote-Controlled-Wall-Mounted-Fan-
fig-5

Front guard
Fan securing nut
Securing clip
Fan blade
Rear guard nut
Rear guard
Motor shaft
Motor unit

AEEMBLING

Unscrew the fan securing nut 2 clockwise
(NOTE: fan securing nut has a reverse thread!) and the plastic rear guard nut 5 anticlockwise to remove both of them. Fix the rear guard 6 to the motor with the rear guard nut 5 then tighten (Fig.1).
Place the blade into shaft, and make sure the rotor shaft pin is fitted into the groove of the blade.
Turn the fan securing nut anticlockwise to tighten the blade. (Fig.2)
Assemble the guard clip and place loosely around the rear guard. (Fig. 3)
Carefully insert the front guard into the guard clip, and when secure, fully tighten the retaining screw. (Fig. 4)
Check to ensure that the guard clip is securing the front to the rear guard correctly. DO NOT use the fan without both guards securely in place.

PREPARING THE FAN

MOUNTING ON THE WALL
The fan must be correctly installed before use. Caution: to prevent the fan from falling off, do not install it on walls that are unable to correctly support the weight and load of the fan unit. If in any doubt seek advice from an appropriately qualified person.

Fix the supplied mounting bracket firmly to the wall using the two screws or alternative correctly specified fixings. (Fig. 5)
NOTE: The bracket should be a minimum of 30cm from the ceiling and any adjoining wall and away from doors, windows and moveable fabrics (curtains etc).
Installing the stand:
Mount the stand on the bracket by inserting the hook on the rear of the fan into the slot on the wall bracket.

TO ADJUST THE FAN ANGLE
Push the guard gently to the desired up or down angle. (Fig. 6)

OPERATING INSTRUCTIONS

REMOTE CONTROL OPERATION. FIG. 7

ON/OFF KEY
The key is for switching on the fan. The fan will be started at a low speed. Press this key again and the fan will be switched off.
TIMER KEY
- When this key is touched repeatedly or kept in pressed state, the fan timer will be set for continuous operation during increased steps of 0.5 hour to 7.5 hour in 15 steps.
- For instance, if the fan operation is required to be set for 5.5 hours, this key must be touched repeatedly so that the indicator lamps for 0.5, 1 and 4 hours light together. It means that the set time is 0.5 + 1 + 4 = 5.5 hours.
- The time settling indicated by the indicator lamps will decrease gradually in units of 0.5 hour during operation in this mode.
- Don’t press the TIMER key when the fan is required to operate continuously.
SPEED KEY
After the fan has started, this key serves as a speed selector in the sequence from “low-medium-high-low” when this key is being touched either repeatedly or continuously.
OSCILLATION KEY
After the fan has started, press this key to oscillate the fan, and stop the oscillation at desired direction by pressing again.
MODE KEY
Press this key select mode. This key is the selector key for the fan air type. The changes in the sequence are NORMAL-NATURAL-SLEEP-NORMAL-NATURAL. The 3 fan air types are as follows:
- NORMAL:
  The fan delivers air constantly with high, medium or low speed set by the SPEED key.
- NATURAL:
- The fan delivers air according to the in built pre-set programme simulating natural wind.
- The fan varies from strong to weak or vice-versa.
- SLEEP:
  The fan weakens step by step during the present time until it stops. Then the fan switches automatically off. This function will ONLY operate when the fan timer function is engaged.

OPERATING INSTRUCTIONS

USE OF REMOTE CONTROL.
Point the remote a the body of the fan and press the required buttons to operate. The remote will work up to approximately 5 meters from the body and up to a 30 degree angle right and left of the fan body.

REPLACING BATTERIES
(NOT INCLUDED) FIG.1

Press down on the battery compartment cover gently and slide it out.
Insert the batteries, making sure that the positive terminals are facing the correct way.
Replace the cover.

BATTERY WARNING

Do not dispose of batteries in fire, they may explode or leak.
Do not mix old and new batteries.
Do not mix alkaline, standard (crabon-zinc) or rechargeable (nickel-cadmium) batteries.

MAINTENANCE

MAINTENANCE

Always unplug the fan from the power supply before cleaning.
All plastic components should be cleaned with a damp cloth. DO NOT spray with water/cleaning agents or immerse the fan unit in water.
WARNING: Ensure that any water and/or cleaning detergent DOES NOT enter the motor housing or switch mechanism.
Ensure that the unit is clean, dry and correctly assembled after cleaning and before every use.

EXPLANATION OF SYMBOLS

EXPLANATION OF SYMBOLS

DRAPER-74842-16-Inch-Remote-Controlled-Wall-Mounted-Fan-
fig-18

DISPOSAL

At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations.
Contact your local authority for details of collection schemes in your area.
In all circumstances:
- Do not dispose of power tools with domestic waste.
- Do not incinerate.
- Do not abandon in the environment.
- Do not dispose of WEEE* as unsorted municipal waste.
- Waste Electrical & Electronic Equipment.

CONTACTS

DRAPER TOOLS LIMITED, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. U.K.
Helpline: (023) 8049 4344
Sales Desk: (023) 8049 4333
General Enquiries: (023) 8026 6355
Service/Warranty Repair Agent
drapertools.com
For aftersales servicing or warranty repairs, please contact the Draper Tools Helpline for details of an agent in your local area.