DEBOPO QC86 20000mAh Power Bank User Manual
- June 12, 2024
- DEBOPO
Table of Contents
USER MANUAL
Thank you for purchasing our product, in order to use this product safely, please read the instructions carefully before use, and keep this manual for future reference.
Schematic:
① Output(USB-A1)
② Output(USB-A2)
③ Input/Output(Type-C)
④ LED display
⑤ Switch button
⑥ LED flashlight
Product Specification:
- Product Model: QC86
- Battery Type: Rechargeable Polymer Li-ion Cell
- Input(Type-C): 5V 3A； 9V 2A； 12V ****1.5A
- Output(USB-A1): 5V 3A； 9V 2A； 12V 1.5A； 5V 4.5A； (SCP22.5W Max)
- Output(USB-A2): 5V 3A； 9V 2A； 12V 1.5A； 5V 4.5A； (SCP22.5W Max)
- Output(Type-C): 5V 3A； 9V 2.22A； 12V ****1.66A； (PD20W)
- LED flashlight Power: 0.2W/20Lumen
- Charging Time: About 5 hours (Use PD20W adapter)
- Working Temperature: 0°C-50°C
- Product Size: (L)154×(W)73×(H)21(mm)
- Product Weight: ≈350g
Instructions:
-
LED display
Short press button once displays device power remaining, when the power bank works in the fast charging mode whether input or output, there is “Lightning” mark on the screen. -
The flashlight’s turn on and off
Long press the button 4S, flashlight turn on, Long press the button 4S again, flashlight turn off.
-
Charge the power bank through power adapter
This power bank comes with one Type-C input port, connect with the phone power adapter, you can charge for this power bank by input port, LED screen numbers flashing. when full charged, the power display 100% and keep on.
When the power bank is recharging rapidly, the “Lightning” mark will light up on the LED screen.
Please Note:
If swells or liquid leakage phenomenon occurs during working, stop using it immediately.
-
Charge for cell phones, ipad and other digital products
The power bank has 2 USB-A and 1 Type-C output port, connect the digital product with any output port, it can charge for the digital product. During the charging process of digital products, the LED display lights up, and the “Lightning” mark lights up when the digital device is charging quickly, when the digital product is full charged, Please stop supplying power to the digital device, then the LED display turns off.
Please Note:
When the power remaining is low, the power indicator flash for warning, the
device can’t output at this moment.
Please Attention:
- Full charge the product with your first time use;
- If swell, leakage, deformation, immerse in water, short circuit occurs, stop using immediately;
- Don’t drop the device or use it in the high temperature, moist, strong magnetic environment;
- Please put the power bank on the place where kids can’t reach;
- Don’t leave the product on the car dashboard, the high temperature will damage the device cause by strong sunlight irradiation;
- Don’t throw any debris in the input output ports, or it may cause damaged or short circuit;
- Avoid the unusual results happen, please use the standard or original packaged charging cable, power adapter etc;
- Don’t use the all in one cable to charge multi devices simultaneously, it may cause damage to the power bank;
- Please confirm whether you device input voltage is the same with the power bank’s output voltage before charging;
- Over discharge may occur if long time lay aside, in order to not affect the performance, please full charge and discharge the power bank at least every 3 months.
■ Warning:
- The device include Li-ion battery cell, don’t disassemble the power bank’s shell without permission, may cause the cell damaged or other danger;
- Don’t disassemble, press, puncture or make it short circuit, don’t throw into water, fire or exposed outside that above 60℃, to avoid catching fire and other danger;
- The device has over heat protection, it will stop working when the environment’s temperature exceed the normal condition, you should put it in the normal environment, then restore it’s output by short press the button.
DongGuan Xionel Electronic Technology Co., Ltd
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>