HYPE HY-TGT-3PK Track-it Bluetooth Tracker User Manual
- June 12, 2024
- HYPE
Table of Contents
BLUETOOTH TRACKER
Operation Manual HY-TGT-3PK
HY-TGT-3PK Track-it Bluetooth Tracker
“Track if” is a Bluetooth wireless device, that helps you track and find your
necessities. Attach this wireless tracker to anything you always forget such
as key or wallet and keep track of them, the 2-way key finder will notify you
when they are out of range with a ring or flash.
In order to use the product, your device will need both of the following:
- Bluetooth 5.2 2
- IOS 8.0 and higher, Android 4.4 and higher.
APP DOWNLOAD AND INSTALLATION
- Download the “Isearching” App from the App store or Google Play.
POWER ON/OFF
****| Power on:
Hold down the tacker’s function button for at least 3 seconds. You wil hear two beeps, the tracker is now powered on
Power Off:
Hold down the tracker function button for at least 3 seconds. You wil hear a long singie beep The tracker is now powered off.
---|---
START APP
Open the app on your smart phone. Please take time t0 review the tularial page
Please click “Alow’ for the noffications of the APP.
WARNING: This product contains a Button Cell Battery. A swallowed Button Cell Battery can cause internal chemical burns leading to death in as little as two hours. Dispose of used batteries immediately. Keep new and used batteries away from Children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Do not mix with used other types of batteries.”
SPECIFICATIONS
Material: ABS
Range: 72FT
Batteries: 1 CR2032 (included)
Bluetooth frequency range: 2402-2480MHz
BT ID: D059694
FCC ID: 2AANZTGT
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Please note that changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC INSTRUCTIONS FOR A CLASS B DIGITAL DEVICE OR PERIPHERAL
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Distributed DGL Group, Ltd. 2045 Lincoln Hwy, Edison, NJ, 08817, USA.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>