HYPE 515-1 Titanium Pro Wireless Headset User Guide
- June 9, 2024
- HYPE
Table of Contents
TITANIUM PRO WIRELESS HEADPHONES
trmE
QUICK START GUIDE
CHARGING THE HEADPHO
Charge the headphone before using it for the first time.
Plug in the cable to the micro USB port and charge for at least 2 hours.
Connect the charging cable to charging port.
PAIRING YOUR HEADPHONE
Your headphone will work best if it is within 30 ft. of your smart device. You may experience sound briefly cutting off if you are out of range or if your wireless connection is weak Make sure Bluetooth is enabled on your smart phone or tablet before starting the paining process.
PAIRING YOUR HEADPHONE (continued)
Make sure the headphone is turned off before attempting to pair it with a
smart phone or tablet. Press and hold the “Power” button to turn on the
headphone.
Press and hold the button until you see the light flash red and blue. This indicates that your headphone is ready to pair.
From your smart phone or tablet, find a list of nearby devices and choose
RSS-515 Enter “00OO” if asked.
The headphone will “beep” when pairing is complete!
CONNECTION LOST?
- If pairing the headphone does not work, turn off the headphone and repeat the steps again in “Pairing your Headphone.”
- Make sure your headphone is within range of your smart device.
- If you hear a long beep, you need to recharge your headphone. Connection may be lost due to low battery.
- When charging your headphones, only use the enclosed USB cable.
EDIA KEY FUNCTIONS
| Press & Hold -Turn device on/off
Reject an incoming call| Press Once -Play/ Pause music
---|---|---
| Press & Hold -Increase volume| Press Once -Next Track
| Press & Hold -Decrease volume| Press Once -Previous Track
SPECIFICATIONS
Bluetooth Version. 5 0
Wireless Distance: Up to 33ft (10m)
Play Time: Up to 4 hours
Tolk Time: Up to 4 Hours
Stondby Time· Up to 160 Hours
Battery Capacity: 150 mAh
Charging Time: Up to 1 Hours
FCC ID: 2AANZ515-1
BT ID D042258
WARRANTY
This product is covered by a 3 month limited manufacturer’s warranty. Contact
us if you have any problems at
support@dglusa.com.
WARNING
Keep away from water and moisture.
Keep away from heat sources.
Do not disassemble.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference thot moy couse
undesired operation.
Please note that changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
FCC INSTRUCTIONS FOR A CLASS B DIGITAL
DEVICE OR PERIPHERAL
Note: This equipment has been tested ond found to comply with the limits
for o Closs B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses ond
can radiote radio frequency energy and,
if not installed and used in accordance with the instructions, moy cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio o television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Compony name· DGL Group, LTD.
Distributed by DGL Group, LTD. 2045 Lincoln
Highway, Edison, NJ, 08817, USA.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>