Qolsys IQ4 Hub User Manual
- June 12, 2024
- Qolsys
Table of Contents
Qolsys IQ4 Hub
Product Information
The Qolsys IQ4 Hub is a versatile device that offers several connectivity options for various applications. It features the Quectel Wireless module Model SC650T-NA, which provides cellular connections (E-UTRA-FDD) on Bands 2, 4, 5, 7, 12, 13, 14, 25, 26, and 66. The module also incorporates Wi-Fi 2.4 / 5 GHz and Bluetooth Low Energy 4.2 support. The Qolsys IQ4 Hub includes a Zwave Daughtercard with an EFR32ZG14 modem for air connection to compatible Z-wave Devices at frequencies of 908.4, 908.42, and 916 MHz for the North American market.
The device comes with embedded antennas for cellular, Wi-Fi, Bluetooth, and Z-Wave connectivity. These antennas are not removable and should not be modified. The product is compliant with FCC regulations (FCCID: XMR2019SC650TNA) and Industry Canada standards (IC: 11205A-QSIQP4Z).
Product Usage Instructions
- Installation: Place the Qolsys IQ4 Hub in a suitable location where it can receive cellular, Wi-Fi, and Bluetooth signals effectively. Ensure a minimum distance of 27 cm between the device’s radiator and your body to comply with radiation exposure limits.
- Connections: The module has three 8-pin receptacle interfaces for connecting other modules such as PowerG, Zigbee, and other Security Radios. One slot is reserved for Z-Wave functionality, leaving two additional slots available for optional modules. These additional modules will provide their own antennas and FCC licenses.
- Z-Wave Operation: The built-in Z-Wave operates at frequencies of 908.4, 908.42, 916, 919.8, and 921.4 MHz with an output power of up to 2.8 dBm. For detailed data and protocol specifications, please contact Qolsys for technical information.
- Compliance: The Qolsys IQ4 Hub complies with FCC regulations (FCCID: 2AAJXQS-IQP4Z) and Industry Canada standards (IC: 11205A-QSIQP4Z). It must not cause harmful interference and must accept any interference received.
- Warranty: Any changes or modifications not approved by Qolsys Inc. will void the user’s authority to operate the equipment and the product warranty. Please adhere to the provided instructions and seek assistance from Qolsys for any concerns or technical issues.
Qolsys IQ4 Hub
General Applications
The Qolsys IQ4 Hub features the Quectel Wireless module Model SC650T-NA with FCC ID: XMR2019SC650TNA providing cellular connections (E-UTRA-FDD) Bands 2, 4, 5, 7, 12, 13, 14, 25, 26 and 66. The Quectel module incorporates also provides WiFI 2.4 / 5 GHz and Bluetooth Low Energy 4.2 support. A main antenna and Diversity antenna are embedded on the Qolsys MB to support these features. Additionally the Qolsys IQ4 Hub includes a Zwave Daughtercard with EFR32ZG14 modem for air connection to compatible Z-wave Devices at the 908.4, 908.42 and 916 MHz for North America Market and includes an embedded Antenna. These antennas are not removable and are not designed to be modified.
Installation and Operation
The module has three simple 8 pin receptacle interface for connections to other modules such as PowerG, Zigbee and other Security Radios. One slot is used for Zwave, resulting in only two additional available slots. These additional modules are optional and will provide their own Antennas and FCC Licenses.
The built in Z-Wave operates at 908.4, 908.42, 916, 919.8 and 921.4 MHz with an output power up to -2.8 dBm. Data and protocol specifications are beyond the scope of this document. Please contact Qolsys for the technical specifications.
FCC Compliance (Declaration of Conformity):
FCCID: 2AAJXQS-IQP4Z
Tradename: Qolsys
Model Number: IQ4 Hub
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 27 cm between the radiator & your body.
Industry Canada Statement of Compliance:
IC: 11205A-QSIQP4Z HVIN: IQ4 Hub
- This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
- This Class B digital apparatus complies with Canadian ICES-003.
- This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.
- This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios.
- The County Code Selection feature is disabled for products marketed in the US/ Canada.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 27 cm between the radiator & your body.
Warranty Information:
IMPORTANT! Changes or modifications not expressly approved by Qolsys Inc. will void the user’s authority to operate the equipment, as well as warranty for the product.
US Responsible Party
Qolsys Inc. 1919 S. Bascom Ave. Suite 600 Campbell, CA 95008 USA
SUPPORT – QOLSYS
1-855-476-5797
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>