HONEY V37C Seduction Suction Cup Vibrator User Manual
- June 12, 2024
- Honey
Table of Contents
HONEY V37C Seduction Suction Cup Vibrator User Manual
Product Parameter
| Product Name: | Licking tongue sucking vibrator |
|---|---|
| Product Materials: | ABS+Silicone |
| Product Weight: | 140g |
| Product features: | Suction/ Vibration |
| Charging method: | USB charging |
| Battery information: | 902830. 3.7V/500mAh |
| Charging Time: | about 120mins |
| Working Time: | about 60mins |
| Voice: | 50dB |
| Size: | 167×43.8×50.7(mm) |
Please fully charge before use.Device is compatible with USB charging or a 5v voltage charging dock
Product introduction
USAGE MATTERS
F2 Suction button:Hold the suction button for 1.5 seconds, (F2 indicator light is on). The suction motor enters the standby mode. Click the suction button to start the suction motor. total of 5 modes. Long press the suction button for 1.5 second to stop the motor, the indicator light is off.
F1 Tongue licking button: Hold the tongue licking button for 1.5 seconds,(the FI indicator light is on). The tongue licking function enter s standby. Click the tongue licking button to start the tongue licking mode, a total of 10 frequencies.Long press the tongue licking button for 1.5 seconds. The tongue licking function stops working. (The indicator light is off)
Charging instructions
- Locate the DC charging port on the back of the product.
- Insert the 2.5dc charging pin into the charging slot for charging.
- The indicator light would flash and be on when fully charged.
Note: The charging time is about 2 hours; usage time is about 60 minutes charged fully.
Cleaning method
-
The product should not be soaked in water to avoid short circuit making it unusable.
-
Clean with water in of .(Do not wash the Suction port and Deflation port with water directly)
-
Wash and dry the product.
-
Store it properly after drying.