Ultralux GFPGU10BL Garden Lighting Fixture Instruction Manual
- June 12, 2024
- ULTRALUX
Table of Contents
GARDEN LIGHTING FIXURE
MODEL: GFPGU10BL
INSTALLATION MANUAL
GFPGU10BL Garden Lighting Fixture
TECHNICAL PARAMETERS
POWER SUPPLY: 220-240 V AC/50-60 Hz
MAXIMUM POWER: 50W max
SOCKET: GU10
LIGHT SOURCE: PAR16
IP RATE: IP65
NOTE: READ THE INSTRUCTIONS BEFORE MOUNTING!
- Performing any activity with the power supply on constitutes potential hazard of electric shock. Prior to mounting, power supply must be switched off by using the main switch.
- The fixture can be installed only on a flame-resistant base with ignition temperature at least 200°C and does not deform or soften (e.g. metal, concrete, plaster).
- Activities related to connection to the power supply are to be commissioned to a person with appropriate authorization.
- The fixture, when properly assembled, may only be connected to a properly functioning electrical system with compliance with the applicable standards.
- Connect the fixture to the electrical supply, observing the correct polarity.
- All conductors and fitting auxiliary components are to be placed on ap-pro-priate distance from the heating parts of the fitting. When choosing the place for mounting, the required minimum distance must be kept between the fitting and the lightened objects.
- Prior to replacing, it is necessary to cut off the power supply by main switch.
- Clean only with dry cloth.
- The light fixture heat itself while working, so in case of necessity prior to undertaking its replacement, wait until cool down.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Do not cover the fixture. To avoid any fire hazard, provide unrestricted air flow to the heated fitting parts.
- Prior to starting operating, make sure the mounting of the product has been performed appropriately, eliminating the hazard of defective operation, not endangering the surrounding and the users.
- The importer/supplier bears no responsibility for damages resulting from failure to comply with these instructions.
TAKE CARE OF THE NATURAL ENVIRONMENT CLEANLINESS:
The products and its components are not dangerous for the environment. Please
dispose all the package elements separately into the appropriate corresponding
material containers.
**** Please dispose all broken lighting fixtures separately in containers for
out of usage electrical equipment. Before disposing the WEEE contact the
importer/supplier or refer to the guidelines of your local environment
protection organizations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>