WASHTOWER WSTT185 Tumble Dryer on Washing Machine Cupboard Instruction Manual
- June 4, 2024
- WASHTOWER
Table of Contents
WASHTOWER WSTT185 Tumble Dryer on Washing Machine Cupboard
Assembling instruction
Before starting, refer to the assembling advice in annex
Nr| Dimension| Colli
1 / 2
| Colli
2 / 2
---|---|---|---
WTK 101| 1823 x 653 x 22| | 1
WTK 102| 1823 x 653 x 22| | 1
WTK 201| 671 x 654 x 22| 1|
WTK 401| 626 x 585 x 22| 1|
WTK 701| 620 x 68 x 16| 1|
WTK 901| 545 x 450 x 22| 1|
WTK 902| 450 x 33 x 16| 2|
WTK 903| 626 x 190 x 16| 2|
WTK 904| 530 x 70 x 16| 2|
WTK 905| 592 x 70 x 16| 1|
Before suspending or fixing furniture to the wall (in order to prevent falling
over), check the type and strength of the wall. Select wall plugs and screws
appropriate for the given type of the wall. In the case of doubts, contact
specialist. The installation must be performed by a competent person.
WARNING!!! If the rawlplugs with screws are attached to the product, then
they are intended only for walls made of solid and homogeneous materials.
GUIDELINES FOR FURNITURE CARE
Please follow the below specified remarks in order to properly take care of
your furniture:
A clean dry soft fabric must be used for cleaning. If the furniture requires
thorough cleaning, then you can slightly moistened it with water or cleaning
agent designed for furniture cleaning, and subsequently the cleaned elements
must be wiped until they’re dry. Metal and glass parts must be cleaned using
commercially available cleaning agents designed for cleaning of this type of
materials, in accordance with the included instructions.
Do not use corrosive agents, scouring agents and other agents if their
intended use is unknown.
The cleaning agents must have clear marking that they are intended for
cleaning furniture.
WARNING!!! High gloss elements, from which the protective foil was removed,
may be cleaned and used only after 72 hours.
ATTENTION
- Please read our operating and or assembly instructions of the product. Failure to comply, changes of the product or use of any other than original parts will result in the warranty or any liability claims to be invalid.
- The assembly or connection of electrical cables or water pipes are only authorised by qualified personnel.
- Retighten all screws and connecting parts on a regular basis to ensure continuous sturdiness.
- Adjust all height adjustable feet until all four feet are positioned evenly on the floor and the unit is stable without any movement.
- The unit will take washing machines/tumble dryers with the maximum measurements of 62cm width, 86cm height and total depth of 65cm. The available standing space on the metal plate has a depth of 58,8cm.
- Small appliances need to be centred and ensure 20 mm space will remain in depth as well as width.
- It is imperative to observe the operating and assembly instructions from the appliance manufacturer.
- Only the usage of washing machines and tumble dryers with electrical out of balance sensors are suitable.
- Only condensation dryers are suitable.
- The cabinets and shelving units are to be fixed to the wall.
- The maximum weight for 1 appliance is not to exceed 120kg including wet laundry.
- Should moisture damage/swelling due to water spillage occur contrarily the construction including the metal shelf, the product is no longer suitable and should be discarded.
- Adhere to the installation and user manual from the appliance manufacturer.
- Depending on the appliance manufacturer a base fixing kit might be necessary to be installed for the washing machine and/or tumble dryer.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>