SOEHNLE Connect 200 Shape Sense Bathroom Scale User Manual
- June 12, 2024
- SOEHNLE
Table of Contents
SOEHNLE Connect 200 Shape Sense Bathroom Scale
Product Information:
The Shape Sense Connect 200 is a body analysis scale that provides accurate
weight measurements and calculates body mass index (BMI). It is equipped with
sensor touch operating elements and can be connected to a smartphone or tablet
using the Soehnle Connect App.
Product Usage Instructions
Preparation:
- Insert 3 x 1.5 V AAA batteries into the scale.
- Place the body analysis scale on a level surface and wait until it powers down automatically, indicated by “0.0” displayed on the screen.
Data Entry:
After the scale has powered down, you can begin entering your data.
- Press the Minus (-) key to decrease values.
- Press the Confirm key to confirm the entered values.
- Press the Plus (+) key to increase values.
Body Mass Index (BMI) Calculation:
The scale calculates BMI based on your weight and height. The BMI values are categorized according to the World Health Organization (WHO) classification.
Connecting the Scale to Smartphone/Tablet:
To connect the scale to your smartphone or tablet, follow these steps:
- Install the Soehnle Connect-App on your smartphone or tablet.
- Follow the instructions provided in the app to complete the installation.
Technical Specifications:
– CE conformity declarations available
– Consumer service contact information:
- Germany Tel.: (08 00) 5 34 34 34
- International Tel.: +49 26 04 97 70
- Operating Hours: Monday to Thursday 8:00 AM to 5:00 PM, Friday 8:00 AM to 4:00 PM
Interpretation of measured values
All figures in %
Body Mass Index
body fat content
body water content``
muscle proportion
This device may be used by children over the age of 8 and persons with reduced
physical, sensory, or mental abilities or with a lack of experience and
knowledge only if such are supervised or have been instructed in the safe use
of the device as well as the resulting risks.
Cleaning and maintenance shall not be made by children without supervision,
Children shall not play with the device.
It is not suitable for persons with electronic implants (pacemaker, etc.).
Attention! Slipping hazard in case of wet surface
A. Operating elements
- Minus ( )
- Confirm ( )
- Plus ( )
Sensor touch:
Only touch the keys softly!
B. Preparation
-
Insert batteries (3 x 1.5 V AAA).
Note: Immediately (as long as „0.0“ is still being displayed) place the body analysis scale on a level surface and wait until the scale powers down automatically.
Then begin with data entry. Otherwise, it might be possible that the weight of the scale would erroneously be added to the initial weighting process.
The same might occur during regular operation if the scale is held in the hand prior to the weighting process. -
For all measurements, place scale level on a hard surface (not on carpet).
-
Cleaning and care: Clean only using a slightly damp cloth. Do not use solvents or abrasives.
Never submerge scale in water. -
A country-specific option to switch from kg/cm to st/in or lb/in is possible by pushing the key on the bottom of the scale to switch units
C. Data input
- Press button.
- Use / buttons to select memory slot and confirm with . ➞ P
- Use the / buttons to set your height and confirm with . ➞ H
- In the next step, set your age and confirm with . ➞ A
- Set gender and confirm with . ➞ S
- To finish, set the activity level and confirm with . (Hold down key for 3 sec.). ➞ AC
AC| Explanation| Hrs per week
---|---|---
1| Hardly any physical activity|
2| Slight, active, sitting and standing activity
3| House and garden work, mainly standing, sitting only occasionally
4| Athletes and people with plenty of movement| Intensive training 5-10 hrs/week
5| Heavy manual labourer, highly active athletes| Intensive training at least 10 hrs/week
Athlete mode:
By setting the personal activity level, the respective calorie requirement can
be precisely determined.
- Now immediately place the body analysis scale on the floor, wait until the screen displays „0.0“ and then step on the scale with bare feet.
The initial measurement is indispensable and serves to store the data for later automatic recognition of persons. If no person steps on the scale, data input must be repeated. The first body analysis is performed after a person steps on the scale.
This scale is equipped with a Time-Out mode.
It will automatically switch off after approx. 40 seconds if no keys are
pressed.
Alternative: You can also perform this step conveniently via the Soehnle Connect app, in which case the data is transferred to the scale. The first measurement is necessary, however. Once you have entered the data on the scale for the recognition of persons as described under C, the Soehnle Connect app will automatically adopt this.
D. Body analysis
-
Place scale on a solid, level floor and wait until scale switches off automatically.
Step on the scale with bare feet. Stand still. -
Body weight and the other calculated data are displayed.
-
If the determined values cannot be clearly allocated to one user, the possible memory slots will be displayed.
If the calculated weight can be allocated to more than 2 users, other possible memory slots will be displayed after 3 seconds.
Use the / keys ( = left, = right) to confirm the memory slot displayed there.
The scale measures the individual body values by means of bioimpedance
analysis (body fat percentage, body water, muscle mass), calculates the basic
metabolic rate per day (kcal) and the BMI (Body Mass Index). The 9-segment
status bar shows the respective deviation from the normal value (see
overleaf).
The scale switches off automatically.
Note: If needed, the user can step off the scale as soon as the first value appears on the display.
Interpretation of measured values
In order to be better able to assess your measured values, at the front of
this operating manual you will find an overview table, from which you can take
the commonly accepted optimal values.
The optimal range is marked in the table with a .
Values outside this range are either too low (–) or too high (+/++).
Here is an example:
A female user is 35 years old and is shown a body fat content of 28.2 % from
the scale. For the age group of 30-40 year old women, this is a value in the
optimal range (22-31 % ➞ ).
Classification of weight according to BMI
(source: World Health Organisation, 2016)
E. Notifications
- Replace battery (Lo = low battery)
- Overloading of scale (max. 180 kg)
- The measured value is above (H) or below (L) the threshold value specified below.
Other add-on functions via the Soehnle Connect app
You can connect this body analysis scale with your smartphone (iOS® or
Android™) via Bluetooth
Use the Soehnle Connect app for this to make use of more functions among other things:
- Difference to last weighing
- Difference to the desired weight
Installation of the Soehnle
Connect app
Install the Soehnle Connect app on your smartphone or tablet as follows:
Android™ smartphones/tablets
If you use an Android device, download and install the Soehnle Connect app
from the Google Play Store. To do so, scan the QR code or open the app with
the name “Play Store” and look for “Soehnle Connect app”. Then load and
install the free app.
iPhone® / iPad® (iOS®)
If you use an Apple iPhone or iPad, download and install the Soehnle Connect
app from the Apple App Store. To do so, scan the QR code or open the app with
the name “App Store” on your iPhone and look for “Soehnle Connect app”. Then
load and install the free app.
System requirements for using the Soehnle
Connect app and full functionality:
- Android™: 6.0 or later
- iOS®: iOS 9 or later
- Bluetooth®: 4.0 or later
Compatibility
The Soehnle Connect app is compatible with Google Fit® and Apple Health®.
You can find more information on the Internet at
www.soehnle.de. Or contact our consumer service.
Connect scale with smartphone/tablet
- Activate Bluetooth® on your smartphone or tablet and start the Soehnle Connect app.
- When you start the Soehnle Connect app for the first time, you are automatically guided through the process for connecting a Soehnle appliance. Make sure that the scale is switched on (step onto the scale briefly).
- Once you have already used the Soehnle Connect app, go to the connection in the Soehnle Connect app on the “main menu” and press “my devices” and then also “Add device”.
Technical data
- Bluetooth®: 4.1
- Frequency band: 2.4 GHz
- Maximum transmission power: 10 mW
- Max. 200 kg / 100 g
- Max. 440 lb / 0.2 lb
- Max. 31 st / 0.2 lb
- Age: 17-99 years
- Batteries required: 3 x 1.5 V AAA
Guarantee
Leifheit AG offers a 3 year guarantee for this quality product as of the
purchase date (or in case of orders, as of receipt of the goods). Guarantee
claims must be asserted within the guarantee period immediately after
occurrence of the defect. The guarantee includes product quality.
The following are excluded from the guarantee:
- Wear caused by use or other natural wear;
- Damage caused by improper use or handling (e.g. impact, shock, drop),
- Damage caused by non-compliance with these operating instructions;
- Battery, or rechargeable battery
In case of a guarantee claim, Leifheit, at its own discretion, either repairs
the defective components or replaces the product. If a repair cannot be
performed and an identical product is no longer available in the product range
for the purpose of replacement, you will receive a replacement product of the
closest equivalent value. Reimbursement of the purchase price is not possible
in case of a guarantee claim. This guarantee furthermore does not grant any
claims for damages.
To assert the guarantee, please contact the seller where you have acquired the
product and present the defective product and the purchase receipt (copy).
This guarantee is valid worldwide.
Your statutory rights, in particular warranty rights, continue to apply and
are not limited by this guarantee.
CE conformity
This device complies with the applicable
EU Directive (www.soehnle.com).
Battery disposal EU Directive
Batteries are not a part of your regular household waste. You must return
batteries to your municipality’s public collection or wherever batteries of
the respective type are being sold.
Batteries that contain hazardous substances feature this sign:
Disposal of electric and electronic devices
EU Directive
This product is not to be treated as regular household waste but must be
returned to a collection point for recycling electric and electronic devices.
Further information is available from your municipality,your municipality’s
waste disposal services, or the retailer where you purchased your product.
Consumer service
The following contact partners are happy to help you in case of questions and
comments:
Germany Tel.: (08 00) 5 34 34 34
International Tel.: +49 26 04 97 70
Monday to Thursday 8.00 am to 5.00 pm
Friday 8.00 am to 4.00 pm
Legal information
Apple, iPhone, iPad, iOS, Apple Health and the Apple logo are trademarks of
Apple Inc., registered in the U.S. and other countries. App Store is a service
mark of Apple Inc., registered in the U.S. and other countries.
Android, Google Fit, Google Play and the Google Play logo are trademarks of
Google Inc.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
More disposal information:
www.leifheit.com/en-en/service/sustainability
Quality & Design by
Leifheit AG
Leifheitstraße 1
56377 Nassau / Germany
www.soehnle.com
References
- Service | Leifheit
- Hier kannst du mehr über unseren Service erfahren | Soehnle
- soehnle | Soehnle
- Perfekt durch den Tag mit unseren Haushaltsgeräten | Soehnle
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>