UltraLux LLHB10050 LED Linear Industrial Lighting Installation Guide
- June 12, 2024
- ULTRALUX
Table of Contents
UltraLux LLHB10050 LED Linear Industrial Lighting
- Model: LLHB10050
- Model: L LHB15050
This product contains a light source of energy efficiency class C.
FEATURED
DIMENSION
INSTALLATION INSTRUCTION
WIRING
NOTE: T HE INSTALLATION BASE MUST BE ABLE TO SUPPORT 10 TIMES WEIGHT OF THE PRODUCTS!
INSTALLATION MANUAL
NOTE : READ THE INSTRUCTIONS BEFORE MOUNTING!
- Performing any activity with the power supply on constitutes potential hazard of electric shock. Prior to mounting, power supply must be switched off by using the main switch.
- The fixture can be installed only on a flame-resistant base with ignition temperature at least 200°C and does not deform or soften (e.g. metal, concrete, plaster).
- Activities related to connection to the power supply are to be commissioned to a person with appropriate authorization.
- The fixture, when properly assembled, may only be connected to a properly functioning electrical system with compliance with the applicable standards.
- Connect the fixture to the electrical supply, observing the correct polarity.
- (L) LIVE= BROWN;
- EARTH= GREN/YELLOW; (N)
- NEUTRAL = BLUE
- All conductors and fitting auxiliary components are to be placed on ap-pro-priate distance from the heating parts of the fitting. When choosing the place for mounting, the required minimum distance must be kept between the fitting and the lightened objects.
- Prior to replacing, it is necessary to cut off the power supply by main switch.
- Clean only with dry cloth.
- The light fixture heat itself while working, so in case of necessity prior to undertaking its replacement, wait until cool down.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Do not cover the fixture. To avoid any fire hazard, provide unrestricted air flow to the heated fitting parts.
- Not suitable for accent lighting.
- Prior to starting operating, make sure the mounting of the product has been performed appropriately, eliminating the hazard of defective operation, not endangering the surrounding and the users.
- The importer/supplier bears no responsibility for damages resulting from failure to comnly with these instruction‹
TAKE CARE OF THE NATURAL ENVIRONMENT CLEANLINESS:
- The products and its components are not dangerous for the environment.
- Please dispose all the package elements separately into the appropriate corresponding material containers.
- Please dispose all broken lighting fixtures separately in containers fo out of usage electrical equipment. Before disposing the WEEE contact 1-d the importer/supolier or refer to the guidelines of your local environment protection organizations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>