aiwa HSTBTN-800 Bluetooth On-Ear Headphone User Guide

June 12, 2024
Aiwa

aiwa logo

aiwa HSTBTN-800 Bluetooth On-Ear Headphone

aiwa HSTBTN-800 Bluetooth On-Ear Headphone

SAFETY PRECAUTIONS

Thank you for purchasing HSTBTN-800. This is your assurance of quality, performance and value. Our engineers have included many useful and convenient features in this product. Please be sure to read this instruction Manual completely to make sure you are getting the maximum benefit from each feature. This product was manufactured using the highest quality components and standards of workmanship. It was tested by inspectors and found to be in perfect working order before it left our factory.

IMPORTANT

Read these safety instructions before using your device. The safety and operating instructions should be retained for future reference.

  1. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool or similar environments.
  2. Put this product and its accessories somewhere out of the reach of children, to avoid danger or their inappropriate use.
  3. You must use the provided power cord to connect the device, otherwise it may cause damage to the unit.
  4. Only use attachments/accessories specified by the manufacturer.
  5. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
  6. When connected the cord should always be readily accessible.
  7. Unplug the apparatus during lightning storms or when unused for long periods of time.
  8. Do not store near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  9. The device is intended for use only in a temperate climate.
  10. It shouldn’t be stored or used at temperatures below -10°C (14 F) or above 40°C (104 F) which may damage the set.
  11. Do not expose the unit directly to the sunlight nor heat radiation.
  12. Do not expose the unit to strong magnetic or electronic interferences.
  13. The unit should be installed on stable and horizontal surface.
  14. Leave a clearance of at least 30 centimeters around the unit and 1 meter above for ventilation.
  15. Do not place objects on top of the unit.
  16. Do not look directly into the vents when the unit is working.
  17. Do not put your fingers or foreign objects into the air intel or vent.
  18. Do not install the unit in a location where there are strong odors such smoke or oil.
  19. Replace the filter when necessary.
  20. Cleaning:
    • Turn Off the unit if it’s On and unplug before cleaning.
    • Do not use liquid cleaners or aerosol cleaners.
    • Clean only with dry cloth.
  21. Do not attempt to repair this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Damages that need repair must be refer all to qualified service personnel.
  22. You should adjust the volume carefully when using the headphones to avoid ear damage.
  23. Stop using the headset in potentially dangerous situations to ensure your safety.
  24. Avoid using headphones while driving, as they can cause distractions.
  25. You should avoid prolonged listening at high volume levels. If you feel a ringing or the volume is too loud, reduce the volume.
  26. Stop using the headset if you notice obvious discomfort, irritation, or other adverse reactions.

The packaging needs to be destroyed in accordance with relevant local laws and regulations on waste disposal. Cartons and paper need to be sorted as recyclable paper and platinum as a recyclable resource (potential recycling resource). When the crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2012/19/EC. All electrical and electronic products including batteries should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.

SPECIFICATIONS

  • Bluetooth version: V 5.0
  • Battery: Lithium 3.7V, 300mAh
  • Noise reduction performance: 25dB
  • Driver Unit: 40mm
  • Sensitivity: 105 dB / 1mW(S.P.L at 1KHz)
  • Frequency response: 20Hz-20kHz
  • Impedance: 32Ω
  • Rated Power: 10mW / Max. Power: 20mW
  • Charging time: about 2 hours / Charging current: 240mA
  • Dimension: 175 x 185 x 35 mm / Weight: 170 g

Due to continual revision and improvement of our products, design and specifications are subject to change without further notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals