PalFur B0CCHYS98V IN01 Pet Grooming Kit User Guide

**PalFur B0CCHYS98V IN01 Pet Grooming Kit User Guide

**

Important Safety Instructions

To reduce the risk of injury or damage, read these safety instructions carefully and keep them at hand when setting up, using, and maintaining this device

WARNING SYMBOLS USED
This is the safety alert symbol. This symbol alerts you to potential hazards that could result in property damage and/or serious bodily harm or death.

• Do not use this product without a filter installed.
• Before using, remove any large or shaft objects from the floor or cleaning surfaces in order to prevent damage to the filter.
• Ensure someone is supervising the device when it is connected to power.
• Use the power cord provided with the machine.
• Extreme caution should be exercised when using the appliance on stairs.
• Make sure the device is turned off before unplugging the power.
• Before any maintenance or cleaning of the device, ensure the power is turned off and the plug is unplugged from the socket.
• Turn off the power and unplug the plug before changing or connecting any accessories, including hoses.
• Do not pull on the power cord while carrying the device or turning off the power.
• This device is only to be used with the power supply unit provided.
• Check the electrical regularly for defects.
• Before using, make sure the power cord and plug are in good condition and not damaged.
• If the power cord is damaged or defective, it must be Replace d by the manufacturer, its service agent, or a similarly qualified person to avoid danger.
• Keep the device away from heaters, radiators, open flames, and other hot surfaces.
• Keep the ends of the hose, telescopic tube, and other openings away from your face andbody.
• This device is not a toy, do not let children or pets play with the device
• Children and pets should be supervised when this device is operating.
• This device is not intended for use by individuals with decreased physical, sensory, or mental capabilities, or lack of experience and knowledge, including children unless they have been given supervision or instruction.
• Keep the device dry.
• To prevent electric shock, do not use the device outdoors.
• To prevent electric shock, do not immerse the device’s lid, power cord, or power plug in anyliquid.
• Not water-resistant.
• Not for water absorption.
• The electric trimmers’ hose cannot be washed with water.
• Do not touch the power cord and socket with wet hands.
• Do not handle or operate the device with wet hands, and always follow electrical safety precautions.
• If the machine is exposed to water, dropped, or damaged, do not attempt to repair it yourself, but send it to an authorized service center.
• Do not place heavy objects on the device.
• Do not sit or stand on this device.
• If the machine’s air flow rate decreases or stops, check whether the hose/brush is blocked or the dustbin is full.
• Do not pile up debris at the device’s intake or outlet. If the air intake, outlet, or hose is blocked, turn off the vacuum cleaner immediately and quickly remove the blockage after ensuring the device is unplugged.
• Store and operate this device in room-temperature environments only.
• Never use water to clean the main unit, hose and electric trimmer.
• Never attempt to make any modifications electrically to the vacuum cleaner.

About Your PalFur IN01

What’s in the Box

PalFur IN01 × 1

Power cord × 1

Hose × 1

Quick Guide × 1

Guard Combs × 4

Sponge cushion ×2

Hair Remover × 1

Electric Clipper × 1

Grooming Brush × 1

2-in-1 Brush × 1

Deshedding Tool × 1

A.Top & Side

1. Main power switch (On/Off)
2. Dustbin Unlock Button
3. Speed Setting
4. LED indicator light
5. Machine handle
6. Dustbin
7. Dustbin release button
8. Hose inlet
9. Anti-explosion HEPA cover
10. Power cord storage compartment

B.LED Indication

You can see the status of PalFur IN01 from the LED indicators.

  Switch
 Dustbin Unlock Button
 Speed Setting
 Power
 Low
 Medium
 High

• The PalFur IN01 is off.
• The PalFur IN01 is overheating.
• The circuit of PalFur IN01 is damaged.

Solid white|

• For desensitization training
• Suitable for pets prone to stress

Solid white| Suitable for pet grooming
Solid white| Suitable for pet trimming
Four lights on at the same time|

• The electric trimmer malfunctions.
• The hose malfunctions or blocks.

C. Grooming Tools

Electric Clipper
Efficient, precise cutting for pet grooming with no residue or flyaway hair. Note: Please be careful on soft parts of pet skin.Don’t use too much force and cut your pets skin.

Deshedding Tool
Effectively reduces shedding and leaves your furry friend with a sleek and healthy coat.
Note: Remember to pay attention to the edge and sharpness when using Position; Do not cause excessive force on the skin.

2-in-1 Brush
perfect for cleaning clothes,hard-to-reach areas, and removing pet hair

Grooming Brush
Removes floating hair, old hair, and other debris from your pet’s coat, making it more fluffy and clean.

Hair Remover
Ideal for getting rid of pet hair on your floor and couch. It’s also effective as a standalone grooming tool.

Comfort Guard Combs
The detachable guide combs are made for quick, easy comb changes and increased versatility. Switch between combs of different lengths according to different hairstyle requirements and the length and texture of your pet’s fur.
Note: The combs are small and can be easily lost, so please keep them properly when not in use.

Using Your PalFur IN01

Important Tips Before Use

Using the machine with the filter.

Never use water to clean the main unit, hose, and electric trimmer.

Not for water absorption.

Preparation

1. Connect the hose to the hose inlet on the vacuum cleaner.

2. Connect the accessory to the vacuum cleaner through the hose.

3. Connect the electrical power supply.

Cleaning and Maintenance

For optimal performance, follow the instructions below to clean and maintain PalFurIN01 regularly. The cleaning/Replacement frequency will depend on your usage habits of PalFur IN01.

Recommended cleaning/Replacement frequency

If the vacuum cleaner is used inefficiently, please check the following points:

1.  Whether the dustbin is full of hair: dustbin must be cleaned in time, so as not to causeinternal blockage, or motor overheating, resulting in damage to the vacuum cleaner.
2. Whether the hose is clogged with hair: If so, please clean and unclog the hose in time.

Clean the Dust Bin

1. Removing the Dust Bin
   Press the unlock button on the top of the machine and gently lift the dust bin out in the direction of the arrow.

2. Opening the Dust Bin
   Press the unlock button, turn the latch to open the dust bin, and pour out the debris.

3. Installing the Dust Bin
   Install the dust bin in the direction of the arrow.

Note

•  Please be careful when removing the dust bin.
• IMPORTANT! Turn off the machine before conducting any maintenance tasks. It is recommended to clean the dust bin after each use or when dust reaches the max fill line.

Clean/Replace the Hose

1. Remove the dustbin, and install it back after thoroughly cleaning

2. Run the machine, then the hair will be sucked into the dustbin automatically.

Clean/Replace the HEPA Filter Box

1. Remove the dust bin when the machine is completely powered off and take out the HEPA filter box.
2. Clean the filter box thoroughly with water and let it dry completely.
3. Place it in a well-ventilated area to dry for at least 24 hours.
4. Install the completely dry HEPA filter box back into the machine

Note:

• HEPA should be cleaned at least once a month.
• Maintenance period varies depending on usage frequency and conditions, clean it when it’s dirty.
• Make sure to disconnect the power and unplug the machine before cleaning.
• Do not install the HEPA filter box before it is completely dry, as it may cause electrical shock or malfunction

Clean/Replace the Sponge filter

1. Remove the dust bin when the machine is completely powered off and take out the Sponge filter.
2. Clean the Sponge filter thoroughly with water and let it dry completely.
3. Place it in a well-ventilated area to dry for at least 24 hours.
4. Install the completely dry Sponge filter back into the machine.

Note:

• Sponge filter should be cleaned at least once a month.
• Maintenance period varies depending on usage frequency and conditions, clean it when it’s dirty.
• Make sure to disconnect the power and unplug the machine before cleaning.
• Do not install the Sponge filter before it is completely dry, as it may cause electrical shock or malfunction.

Troubleshooting

• Make sure the main power switch is in the ON position.
• If you still have trouble, turn off the main power switch and then turn it back on.

The PalFur IN01 shutdown during the use|

• Cool the machine down for 2-3 hours before turning it on again.

The electric trimmer does not work|

• Make sure the power switch is in the ON position.

The electric trimmer makes a strange noise|

• Try to reinstall the blade on the head of the electric trimmer.
• Clean up the foreign objects within the electric trimmer.

The PalFur IN01 makes abnormal motor noise|

• Check whether the air filter is properly assembled

The PalFur IN01 has no suction|

• Check whether the hose is blocked, and clean up the hair within the hose and dustbin.

Specifications

• Model: IN01
• Voltage: 120V 60Hz
• Power: 350W max
• Suction power: 3/7/10 kPa
• Dust capacity: 1.9L
• Machine dimensions: 296.5×130×256mm
• Net weight: 2.34Kg
• Power cord length: 2.5m
• Hose length: 1.8m
• Noise: 70dB

After-sale Service

Warranty Policy

• Customers can return or exchange the product after being identified by the PalFur quality inspection center within 30 days due to quality issues.
• Customers can enjoy product maintenance services free of charge after being identified by the PalFur quality inspection within 12 months due to quality issues.
• To return or exchange an item, please contact our service team via service@palfur.com for an RMA(Return Merchandise Authorization).
• The email should contain：
  1. Photos that clearly show the appearance of all sides of the product.
  2. Photos of the complete accessory display.
  3. Photos of the original packaging.
• A brief explanation for the return. This will be helpful to us to improve our product.
• For ensuring the whole procedure fast and smoothly, please meet the following requirements:
  • The product and accessories with the original packaging.
  • The product and accessories shouldn’t be any cracks, dents, scratches, or any factors that may affect re-sales.
• For more information, please refer to https://palfur.com/pages/return-warranty-policy

Note
Situations not covered by the warranty

1. Over the expiration of warranty
2. Problems caused by unauthorized disassembled or repaired.
3. Damage caused by ignoring the precautions mentioned in the instruction and improper use.
4. Damage caused by fire, lightning strike, flood, pet bite and other force majeure.
5. Normal fading and aging of the product during use.
6. Random gifts.
7. Products not purchased through PalFur official channel

Customer Service

For FAQs and more information, please visit www.PalFur.com.

Contact us:

 Facebook: @PalFur.com
 Facebook Group: facebook.com/groups/3633460456887722
 Instagram: @palfurofficial
 TikTok: @palfurofficial
 YouTube: @palfurofficial
 Email: service@palfur.com

Li Bao Pet Technology (Shenzhen) Co.
301, Building 1, No.13, Xinfa East Road, Xiangshan Community, Xinqiao Street, Baoan District,
Shenzhen,China

RANGER’S TECHNOLOGY INC.
8 The Green, STE A, Dover, County of Kent, DE, 19901. USA

References

• PalFur | 5-In-0ne Professional IN-HOME Pet Grooming Vacuum Kit
• RETURN, REFUND, WARRANTY POLICY

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>