steel play JVAMUL00156 Magic Wireless Headset User Manual
- June 12, 2024
- Steel play
Table of Contents
Steel play JVAMUL00156 Magic Wireless Headset
Product Information
The Adventure Wireless Headset is a Bluetooth headset that provides wireless
audio connectivity. It operates in the frequency band of 2402 – 2480 MHz
Bluetooth with a maximum output power of 10dBm. The headset is designed for
use with various devices, including the SwitchTM and Windows devices.
Product Usage Instructions
Pairing the headset (SwitchTM)
- Turn on the headset.
- Put your SwitchTM device into pairing mode.
- On the headset, navigate to the Bluetooth settings and select the SwitchTM device from the available list.
- Follow any on-screen prompts to complete the pairing \process.
Pairing your headset (Windows)
- Turn on the headset.
- Put your Windows device into pairing mode.
- On the headset, navigate to the Bluetooth settings and select the Windows device from the available list.
- Follow any on-screen prompts to complete the pairing process.
Connection lost?
If the headset pairing does not work, try the following:
- Turn off the headset and repeat the steps mentioned in the pairing the headset.
- Make sure your headset is within range of your device.
- If you hear a long beep, you need to charge your headset. The connection may be lost due to a low battery.
- When charging your headset, be sure to use only the included USB cable.
Please refer to the user manual for more detailed information and warranty conditions.
©2023 Pixminds Distribution. All rights reserved. “Steelplay”, “Pixminds Distribution” and their logos are trademarks and/or registered trademarks of Pixminds Distribution SAS, and/or its affiliated companies. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc and any use of such marks by Pixminds Distribution is under license “Nintendo”, “Switch” and their logos are trademarks and/or registered trademarks of Nintendo of America Inc., Nintendo Co., Ltd., Nintendo of Europe GmbH. All other product names and images, trademarks or registered trademarks are properties of their respective owners. This is a product 100% NOT official and is NOT manufactured, guaranteed, sponsored, endorsed or approved by Nintendo of America Inc. Product features, appearances, and specifications may be subject to change without notice. Please retain this information for the future. Made in China.
Thank you for purchasing the Steelplay Adventure Wireless Headset. Go on an adventure wherever you are, with complete freedom, with this headset! It will be your ideal companion on Switch™, both wireless (Bluetooth®) and wired. This stereo headset is comfortable to wear for long periods of time, very resistant, and with a balanced sound.
CONTENT
- Bluetooth headset
- 1.60m USB cable
This symbol identifies safety and health information in this product guide.
Read this guide for important health and safety information for the product
you have purchased.
WARNING – BEFORE INSTALLING AND USING THIS UNIT, READ THE INSTRUCTIONS
PROVIDED CAREFULLY. THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR DAMAGE OR
INJURY DUE TO IMPROPER INSTALLATION OR USE. ALWAYS KEEP THESE INSTRUCTIONS
WITH YOUR UNIT FOR FUTURE REFERENCE.
SAFETY INSTRUCTIONS
-
Safety of Children and Vulnerable Persons
WARNING: Choking Hazard Keep the product, accessories, and packaging parts out of the reach of children and pets to avoid accidents. Use of this product should be under adult supervision. -
General safety and use
WARNING : Risk of accident, injury to health
WARNING: Cables and cords Do not use the product in an environment requiring special concentration, such as on the road. Only use the product in environments where Bluetooth is allowed. Do not use the product if it is obviously defective or if it makes loud and unusual noises. Do not listen at high volumes for long periods of time to avoid hearing damage. The product generates magnetic fields that may interfere with pacemakers, implantable defibrillators, and other implants. Always maintain a distance of at least 10 cm between the product and objects sensitive to magnetic interference. Keep the product dry. Normal operating temperature is 5°C to 40°C, lower or higher temperatures may damage the product. Clean the product only with a soft dry cloth. Do not leave the cables within the reach of children and pets. Do not attempt to repair this product. -
Installation Do not install or connect a damaged device. This product is intended to work with the Bluetooth protocol in connection with game consoles, computers, and cell phones. Follow the connection instructions in the user manual and the devices you wish to connect to.
-
Electrical safety
WARNING: Risk of injury, electric shock fire, burns, or property damage. Observe all necessary precautions when connecting this product to a charging device. -
Battery Safety
WARNING: Risk of explosion, fire, heat release, smoke or gas release. Do not heat the product or batteries to a temperature above 40°C. Do not dispose of it in the fire. Avoid exposure to sunlight. Do not charge the product outside of normal operating temperatures. Dispose of the product in a recycling container. Do not puncture the batteries If used improperly, the batteries may leak. Do not replace the batteries. Wireless frequency band and maximum output power: 2402 – 2480 MHz Bluetooth, 10dBm
CONDITIONS OF USE / INSTRUCTIONS FOR USE
Pairing the headset (Switch™)
Make sure the headset is turned on before attempting to pair it with your
console (Power button). Press and hold the play/pause button to start the
pairing process. When you see the light flashing blue and red, go to the
Bluetooth menu on your console. (See below). Your headset will work best if it
is placed within 10m of your device. You may have problems with the sound
cutting out if it is out of range or if your connection is weak. Make sure
Bluetooth is enabled on your device before you start the pairing process.
Pairing your headset (Windows)
Connection lost?
If the headset pairing does not work, turn off the headset and repeat the
steps mentioned in “pairing the headset”. Make sure your headset is within
range of your device. If you hear a long beep, you need to charge your
headset. The connection may be lost due to the low battery. When charging your
headset, be sure to use only the included USB cable
WARRANTY CONDITIONS
This product has a 2-year legal warranty depending on your country. The 5-year
commercial warranty we offer is available via QR code and requires proof of
purchase to activate. The information and opinions expressed in this document,
including the URL and other references to websites, are subject to change
without notice. This document does not give you any legal rights to the
intellectual property of any Steelplay product. You may copy and use
this document for internal reference purposes. contact:
sav@pixminds.com