Steel Play JVAMUL00143 Impulse Bluetooth Headset User Manual

Steel Play JVAMUL00143 Impulse Bluetooth Headset

Product Information

The Bluetooth Headset Impulse is a wireless headset that comes with a microphone and RGB illumination. The headset has a mute button, a volume knob, a 3.5mm audio port, a microphone port, a power button, a USB-C charging port, and an LED indicator light. It  is compatible with SwitchTM, SwitchTM Lite, SwitchTM OLED, Windows  7, 10 and 11, macOS, iOS, and Android platforms that have a jack 3.5mm female plug. The headset also comes with voice prompts for power on, power off, microphone off, and microphone on.

Product Usage Instructions

1. Wired connection of 3.5mm audio cable: Connect the 3.5mm audio cable to the headset and the device with a 3.5mm interface. The headset will automatically power off.
2. Microphone ON/OFF: Click the mute button to turn the microphone on or off. The headset will give voice prompts for the status of the microphone.
3. Volume control: Scroll up or down on the volume knob to increase or decrease the volume respectively.
4. RGB light control: Turn on the headset to activate the RGB illumination. Click the RGB illumination button to turn it off or on again.
5. USB-C charging: Turn off the headset before charging it with the USB-C charging port. A red light will indicate that the headset is charging, and a blue light will indicate that the headset is fully charged.

Please keep the product manual for future reference. Always read the safety instructions before using the product. Keep the product,  accessories, and packaging parts out of reach of children and pets.

To ensure the safe use of this product, please read carefully this instruction manual before using it and keep the manual for any future reference.

Model. JVAMUL00143
©2022 Pixminds Distribution. All rights reserved. “Steelplay”, “Pixminds Distribution” and their logos are trademarks and/or registered trademarks of Pixminds Distribution SAS, and/or its affiliated companies. “Nintendo”, “Switch”, “Switch OLED” and their logos are trademarks and/or registered trademarks of Nintendo of America Inc., Nintendo Co., Ltd., Nintendo of Europe GmbH. All other product names and images, trademarks or registered trademarks are properties of their respective owners. This is a product 100% NOT official and is NOT manufactured, guaranteed, sponsored, endorsed or approved by Nintendo of America Inc., Nintendo Co., Ltd., and Nintendo of Europe GmbH. Product features, appearances and specifications may be subject to change without notice. Please retain this information for the future. Made in China.

STEELPLAY® IMPULSE BLUETOOTH® HEADSET
USER MANUAL
Thank you for your purchase of a Steelplay® IMPULSE BLUETOOTH® Headset!

PRODUCT SPECIFICATION

Headset specification

• Connection type: Bluetooth® 5.1 + 3.5 mm wired
• Battery type: Rechargeable Li-ion Polymer Battery
• Battery capacity: 1000 mAh
• Lighting effects: RGB light
• 3.5 mm audio cable: 2 m
• USB-C charging cable: 1.5 m
• Charging voltage: DC 5V 500 mA
• Charging time: 2.5 hours
• Bluetooth® version: 5.1
• Latency: 50-70 ms
• Working distance: 10 m

Speaker parameters

• Speaker unit: Ø 50 mm
• Sensitivity: 106 dB ±3 dB
• Impedance: 32 Ω ±15%
• Frequency response: 20 Hz ~ 20 kHz

Microphone parameters

• Microphone size: Ø 6 mm * 5 mm(H)
• Sensitivity: -42 dBV at 1kHz
• Impedance: ≤2.2 KΩ
• Frequency response: 100Hz ~ 7kHz

ACCESSORIES

• Microphone x1
• Foam Microphone Cover x1
• 3.5 mm audio cable x1
• USB-A to USB-C charging cable x1

KEYS FUNCTIONS

DESCRIPTION FOR CONTROL

On”
Click 3 seconds| Power OFF
LED light stop blinking| “Power Off”
MUTE BUTTON| Click| MIC off| “Microphone off”
MIC on| “Microphone on”
RGB LIGHT ON / OFF| Click| RGB Light Off|
RGB Light On|
VOLUME KNOB| Scroll up| Volume up|
Scroll down| Volume down|

COMPATIBILITY

Windows 7, 10 ET 11
macOS
iOS
Android
JACK 3.5 MM MODE| All plateforms which have jack 3.5 mm female plug

HOW TO USE

Bluetooth® wireless connection

1. Bluetooth® first time pairing:
   • Hold the Power button for 3 seconds
   • Voice prompts “POWER ON”
   • The blue indicator flashes
   • On smartphone or device, open the Bluetooth® connection
   • Found the “Impulse” device
   • Click “connection”
   • Voice prompts “CONNECTED”.
2. Automatically reconnect to previous device:
   • Hold the Power button for 3 seconds
   • Voice prompts “POWER ON”
   • The blue indicator flashes
   • Voice prompts “CONNECTED”.
3. Pairing with another device:
   • Turn on the headset by holding the Power button for a few seconds until the voice prompt “PAIRING” is heard and the blue LED flashes.
   • On the smartphone or device, open the Bluetooth connection
   • Find the “Impulse” device.
   • Click on “Connect”.
   • The voice message says “CONNECTED”.

• Wired connection of 3.5 mm audio cable
  Please connect the 3.5 mm audio cab le to the headset (headset will auto power off) and the device with 3.5 mm interface.

• Microphone ON/OFF
  Click the Mute button headset will voice prompts “Microphone OFF” or “Microphone ON” which gives the status of the microphone.

• Volume control
  When you scroll the volume button up, the volume increases, and when you scroll it down, the volume decreases.

• RGB light control
  When you turn on the headset, the RGB illumination turns on, click the RGB illumination button to turn it off or on again.

• USB-C charging
  Turn off the headset when charging, a red light will come on during the charging process and a blue light will come on when the headset is charged.

Notes:
When charging, headset does not work in Bluetooth® mode. When charging, headset can work via the jack 3.5 mm cable.
To use the headset in Bluetooth® mode, make sure that the headset is not connected to a device with a 3.5mm jack.

WARNING – FOR YOUR SAFETY WHEN USING THIS PRODUCT, WE RECOMMEND THAT YOU READ THIS MANUAL AND RETAIN THESE DOCUMENTS FOR FUTURE REFERENCE CAREFUL-LY. PLEASE KEEP OUT OF REACH OF YOUNG CHILDREN.
GENERAL INFORMATION
Product support : sav@pixminds.com
Be careful when using wireless devices if you have a pacemaker or are dependent on other life-saving, sensitive electronic equipment, because this device transmits radio signals.

Disposal of packaging materials
The packaging protects the device from damage during shipment. The packaging materials have been selected for their environmental friendliness and ease of disposal and are therefore recyclable. Returning the packaging to the materials cycle conserves raw materials and reduces the amount of waste that is generated. Dispose of packaging materials which are no longer needed in accordance with applicable local regulations.

Disposal of the device
The adjacent symbol of a crossed-out wheelie bin means that this device is subject to Directive 2012/19/EU. This directive states that this device may not be disposed of in normal household waste at the end of its usable life, but must be handed over to specially set-up collection locations, recycling depots or disposal companies. This disposal is free of charge for the user. Protect the environment and dispose of this device properly. You can obtain further information from your local disposal company or the city or local authority.

⚠ This symbol identifies safety and health information in this product guide. Read this guide for important health and safety information for the product you have purchased.
⚠ WARNING – BEFORE INSTALLING AND USING THIS UNIT, READ THE INSTRUCTIONS PROVI-DED CAREFULLY. THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR DAMAGE OR INJURY DUE TO IMPROPER INSTALLATION OR USE. ALWAYS KEEP THESE INSTRUCTIONS WITH YOUR UNIT FOR FUTURE REFERENCE.

SAFETY INSTRUCTIONS

1. Safety of Children and Vulnerable Persons – ⚠ WARNING: Choking Hazard
   Keep the product, accessories and packaging parts out of the reach of children and pets to avoid accidents. Use of this product should be under adult supervision.

2. General safety and use –
   ⚠ WARNING: Risk of accident, health damage
   ⚠ WARNING: Cables and cords
   Do not use the product in an environment requiring special concentration, such as on the road. Only use the product in environments where Bluetooth is allowed. Do not use the product if it is obviously defective or if it makes loud and unusual noises. Do not listen at high volumes for long periods of time to avoid hearing damage. The product generates magnetic fields that may interfere with pacemakers, implantable defibrillators and other implants. Always maintain a distance of at least 10 cm between the product and objects sensitive to magnetic interference. Keep the product dry. Normal operating temperature is 5°C to 40°C, lower or higher temperatures may damage the product. Clean the product only with a soft dry cloth. Do not leave the cables within the reach of children and pets. Do not attempt to repair this product.

3. Installation
   Do not install or connect a damaged device. This product is intended to work with the Bluetooth® protocol in connection with game consoles, computers and cell phones. Follow the connection instructions in the user manual and the devices you wish to connect it to.

4. Electrical safety –
   ⚠ WARNING: Risk of injury, electric shock fire, burns or property damage. Observe all necessary precautions when connecting this product to a charging device.

5. Battery Safety –
   ⚠ WARNING: Risk of explosion, fire, heat release, smoke or gas release.
   Do not heat the product or batteries to a temperature above 40°C. Do not dispose of in fire. Avoid exposure to sunlight. Do not charge the product outside of normal operating temperatures. Dispose of the product in a recycling container. Do not puncture the batteries If used improperly, the batteries may leak. Do not replace the batteries.
   Wireless frequency band and maximum output power: 2402 – 2480 MHz, 10dBm

6. Cables
   Place all cables and cords so that no one (or pet) can accidentally step on them or pull on them as they move about the room. Keep cables and cords out of reach of children and pets. Do not let children play with cables and cords. Excessive moisture can cause electric shock. Make sure the cord is not in contact with hot objects such as a heater.

TERMS OF WARRANTY

Warranty period is 2 years from date of purchase with proof of purchase submitted. Operating instructions must be followed. Specifically excludes any damages associated with leakage of batteries. Product must not have been damaged as a result of defacement, misuse, abuse, neglect, accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our own service facility or an authorized service center, use or installation of non- Steelplay® replacement parts in the product or the modification of this product in any way, or the incorporation of this product into any other products, or damage to the product caused by accident, fire, floods, lightning, or acts of God, or any use violative of instructions furnished by Steelplay®. Obligations of Steelplay® shall be limited to repair or replacement with the same or similar unit, at our option. To obtain repairs under this warranty, present the product and proof of purchase (e.g., bill or invoice) to the authorized Steelplay® Technical Support Center transportation charges prepaid. Any requirements that conflict with any state or Federal laws, rules and/or obligations shall not be enforceable in that particular territory and Steelplay® will adhere to those laws, rules, and/or obligations. When returning the product for repair, please pack it very carefully, preferably using the original packaging materials. Please also include an explanatory note.

IMPORTANT: To save yourself unnecessary cost and inconvenience, please check carefully that you have read and followed the instructions in this manual. This warranty is in Lieu of all other expressed warranties, obligations or liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL OR CONSEQUEN-TIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER Some states do not allow the exclusion or limitation of special, incidental or conse-quential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>