FIBERNOVELTY C16bhWXOalL Two LCD LED Monitors User Manual

FIBERNOVELTY C16bhWXOalL Two LCD LED Monitors

Important Instructions

Severe personal injury and property damage can result from improper installation or assembly

Read the following warning carefully before beginning.

• Products must be installed by professional or installer.
• If you do not understand the instructions or have any concerns or questions, please contact a qualified local installer.
• Do not install or assemble if the product or hardware is damaged or missing, if you require replacement parts, please contact you local distributor for assistance.
• This product fits most 17″-27″ LCD / monitor; maximum weight of LCD / monitor: 9 kg.
• Installer-friendly and straight forward.
• For safe installation, the desk you are mounting to must support minimum 3 times the weight of the total load (the mount, the monitor and all accessories weight).
• Do not use this product for other than the original designed.
• This product contain moving parts, please use with caution.
• When installing monitor, please do not damage electrical wiring or power source.
• Installation and routing of monitor cables on the monitor bracket must comply with electro-technical regulations.
• Importantly, mains- and data-cables must be secured against twisting and squeezing or shearing.
• The manufacturer will bear no responsibility to the desk of mounting, or incidental or consequential damages arising thereof.
• The manufacturer disclaims any liability for the modifications, improper installation, or installation over the specified weight range. The manufacturer will not be liable for any damages arising out of the use of, or inability to use, the product.
• This product is designed for indoor used only, use of this product outdoor could lead to product tailor and severe personal injury.
• This product contains a high pressure gas spring, fire and percussion prohibited. Also it is strictly prohibited to dismantle without professionals. Please return to the manufacturer or hand over to professional agencies if the product is abandoned. In order to ensure the performance of gas spring, full direction adjustment of the product arm is recommended several times per month.
• All images are for reference only. As product in kind prevail.

We reserve the right to modify or alter instruction. No modification or alteration without notice.

Features

What is in the Box

Optional

A-1

Table edge installation

Warning

Ensure screws are secured firmly

A-2 Grommet installation

Directional usage guide

Dimension

For table edge

Working load 2~9 Kg (x2)

Cable routing

D Display installation

E Torque adjustment

1. If display can be hovered at any height after display installed. No adjustment needed.
2. If display lift up automatically after display installed, adjust the following: One man hand press down the screen, the other wind set screw at the bottom of upper arm at joint to ‘ – ‘ direction to reduce torque by using G, 5mm Allen key as shown in Fig-1 and 2 until display can be hovered at any point of positions.
3. If display sit at the lowest position after installation, repeat #2 procedures but winding set screws to ‘+’ direction to increase torque as Fig-1 and 2 until display can be hovered at any point of positions.

F Setting tilt angles

G Display rotation

Only display comes with central gravity will has the best performance.

Warning

1. Do not adjust tension without putting on display.
2. Ensure display has been put onto mount.
3. Working load 2~9 kg (x2)

Distributors

ERGOSOLID SARL
36 rue du Louvre
75001 Paris, France
Tel. (+33)7 72 15 51 60
www.ergosolid.fr

Ergosolid Italia S.R.L
Via Giosue Carducci
32 – 20123 Milano, Italia
Tel. +39 02 5656 8661
www.ergosolid.it

Ergosolid sp. k.
ul. Boya i:elenskiego 15
35-105 Rzesz6w, Poland
tel. +48 17 785 23 71
www.ergosolid.pl

Type Approved Safety Regular Production Surveillance
www.tuv.com
ID 1419075423.

Importer

Fiber Novelty
ul. Boya Zelenskiego 15
35-105 Rzesz6w, Poland
tel. +48 17 787 60 70
www.fibernovelty.pl

Customer Support

KunshanHongjie Electronics Co., Ltd.
1050, FuChunJiangRoad, Economic Development Zone
Kunshan City, Jiangsu Province. China. 215333
Mail : info@nbavmount.com
Website : www.new-nb.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>