GLUCKSTEIN ELEMENTS 38677-HBC 15 INCH 3-LIGHT ROUND SEMI FLUSH MOUNT User Guide
- June 5, 2024
- GLUCKSTEIN ELEMENTS
Table of Contents
USE AND CARE GUIDE
15 INCH 3-LIGHT ROUND SEMI FLUSH MOUNT
Item #1001 591 922
#1006 863 993
Model #38677-HBC
THANK YOU
We appreciate the trust and confidence you have placed in Gluckstein Elements
through the purchase of this 15 inch 3-light round semi flush mount. We strive
to continually create quality products designed to enhance your home. Visit us
online to see our full line of products available for your home improvement
needs. Thank you for choosing Gluckstein Elements!
Safety Information
□ Read all instructions before assembling and installing.
□ Consult a qualified electrician for installation of this fixture.
□ If you have any non-electrical questions about this fixture, please contact
our Customer Service Team at
1-833-695-2045 or visit
WWW.HOMEDEPOT.CA/HOMEDEPOT.COM/GLUCKSTEINELEMENTS.COM.
□Please reference your SKU 1001 591 922 / 1006 863 993 or UPC 773546307383.
□ Keep your receipt and these instructions for proof of purchase.
CAUTION: Before starting installation of this fixture or removal of a
previous fixture, disconnect the power by turning off the circuit breaker or
by removing the fuse at the fuse box.
IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or
exposed copper that have occurred during shipping. If there is a defect in the
wire, do not continue the assembly process. Please call our Customer Service
Team at 1-833-695-2045.
IMPORTANT: Do not install this lighting system in damp or wet locations.
Warranty
LIMITED WARRANTY
WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in
materials and workmanship for a period of five (5) years from date of
purchase. This warranty applies only to the original consumer purchaser and
only to products used in normal use and service. If this product is found to
be defective, the manufacturer’s only obligation, and your exclusive remedy,
is the repair or replacement of the product at the manufacturer’s discretion,
provided that the product has not been damaged through misuse, abuse,
accident, modification, alteration, neglect, or mishandling.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been
improperly installed, set-up, or used in any way not in accordance with the
instructions supplied with the product. This warranty shall not apply to a
failure of the product as a result of an accident, misuse, abuse, negligence,
alteration, faulty installation, or any other failure not relating to faulty
material or workmanship. This warranty shall not apply to the finish on any
portion of the product, such as surface and/or weathering, as this is
considered normal wear and tear. The manufacturer does not warrant and
specially disclaims any warranty, whether express or implied, of fitness for a
particular purpose, other than the warranty contained herein. The manufacturer
specifically disclaims any liability and shall not be liable for any
consequential or incidental loss or damage, including but not limited to any
labor/expense costs involved in the replacement or repair of said product.
Pre-Installation
PLANNING INSTALLATION
Read all instructions before assembly and installation. To avoid damaging this
product, assemble it on a soft, non-abrasive surface, such as carpet or
cardboard. Inspect each part for defects that may have occurred during
shipping. Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part | Description | Quantity |
---|---|---|
AA | Wire nut | 3 |
BB | Junction box screw | 2 |
CC | Ground screw | 1 |
DD | Canopy screw | 2 |
EE | Universal crossbar | 1 |
FF | Nut | 1 |
GG | Gasket | 1 |
Pre-Installation (continued)
PACKAGE CONTENTS
Part | Description | Quantity |
---|---|---|
A | Glass shade | 1 |
B | Center rod | 1 |
C | Canopy | 1 |
D | Glass sheet | 1 |
E | Finial | 1 |
F | Lamp holder combination | 1 |
G | Cover 1 | 1 |
H | Cover 2 | 1 |
Installation
-
Removing the nut and gasket
□ Remove the nut (FF) and gasket (GG) from the lamp holder combination (F).
-
Installing the lamp holder combination and cover 1
□ Secure the lamp holder combination (F), glass shade (A) and cover 1 (G) with the nut (FF) and gasket (GG) .
-
Installing the center rod and the canopy
□ Pass the wires of the glass shade (A) through the center rod (B), and then install the center rod (B) to the glass shade (A).
□ Install the canopy (C) to the center rod (B).
-
Installing the universal crossbar
WARNING: Turn off power at the main fuse box.
□ Install the universal crossbar (EE) to the junction box (not included) with the supplied junction box screws (BB).
-
Making the electrical connections
NOTE: Always use the wire nuts (AA) to connect wires and push all excess wires and connections back into the junction box (not included).
□ Fasten the hanging buckle of the canopy (C) to the universal crossbar (EE).
□ Wrap the ground wire from the fixture around the ground screw (CC) on the universal crossbar (EE), and then connect the ground wire (two) from the fixture to the ground wire from the junction box.
□ Connect the black wire of the power supply to the black wire of the fixture and connect the white wire of the power supply to the white wire of the fixture.
□ Connect the fixture wire as follows: -
Installing the fixture body
□ Attach the canopy (C) to the universal crossbar (EE) and tighten with the supplied canopy screws (DD).
-
Installing the bulbs
□ Install 60W MAX A19 bulbs (not included) to each socket of the glass shade (A).
-
Installing the glass sheet and cover 2
□ Install the glass sheet (D) and cover 2 (H) to the fixture body and tighten with the finial (E).
Care and Cleaning
□ Clean the light fixture carefully with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Problem | Possible Cause | Solution |
---|---|---|
The product will not light. | The bulb is burned out. | _ Replace the light |
bulb.
The power is off.| Ensure that the power supply is turned on.
The circuit breaker is off.| Ensure that the circuit breaker is set to the
ON position.
The fuse blows or the circuit breaker trips
when the light is turned on.| There are too many items on one circuit.| Unplug
the other items on the circuit.
_ Contact a qualified electrician or call the Customer Service Team at
1-833-695-2045.
Questions, problems, missing parts? Before returning to the store,
call Gluckstein Elements Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-833-695-2045
HOMEDEPOT.CA
HOMEDEPOT.COM
GLUCKSTEINELEMENTS.COM
Retain this manual for future use.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>