UltraLux LPSW18CCT LED Ceiling Lamps Installation Guide
- June 12, 2024
- ULTRALUX
Table of Contents
UltraLux LPSW18CCT LED Ceiling Lamps
TECHNICAL PARAMETERS
Voltage AC: ……………………………….. 220-240 V AC/ 50-60 Hz
Power: ……………………………………………………………….. 18W
Rated luminous flux: ……………………………………….. 1800 Im
Correlated Color Temperature (CCT):
…………………………………… 3000/4000/6500 K (adjustable)
Beam angle: ………………………………………………………… 120′
Ambient light: …. 2 Lux, 10 Lux, 50 Lux, Disable (adjustable)
Time delay: ……………………. 5S, 30S, 60S, 300S (adjustable)
Detection range: …………………………………………. 360’/ 180′
Detection distance: ………………………… 1 m-6m (adjustable)
Installation Height:
……………………………………….. 2.5-3.5m (ceiling mounting)
……………………………………………… 1-1.8m (wall mounting)
Sensor:
HF System: ……………………….. 5.8 GHz ISMB band, CW radar
Transmission Power: ……………………………………… <0.2mW
Power Consumption: ……………………………….. approx. 0.9 W
Detection Motion Speed: ……………………………. 0.5-1.5 m/S
Working Humidity: ……………………………………….. <93% RH
Color Rendering Index (CRI): ………………………………. Ra2e80
Working temperature: …………………………… -10°( + +40 ‘C
Protection rating: …………………………………………………. IP54
Dimensions: ……………………………………………… 220/55 mm
Warranty: ………………………………………………………… 2 years
SAFETY INSTRUCTIONS
- Performing any activity with the power supply on constitutes potential hazard of electric shock. Prior to mounting, power supply must be switched off by using the mains switch.
- The fixture can be installed only on a flame-resistant base with ignition temperature at the least 200 ‘C and does not deform or soften (e.g. metal, concrete, plaster).
- Activities related to connection to the power supply are to be commissioned to a person with appropriate authorization.
- The fixture, when properly assembled, may only be connected to a properly functioning electrical system with compliance with the applicable standards.
- Clen only with dry cloth
- The light fixture heat itself while working, so in case of necessity prior to undertaking its replacement, wait until cool down.
- Do not cover the fixture. To avoid any fire hazard, provide unrestricted air flow to the heated fitting parts.
- Prior to starting operating, make sure the mounting of the product has been performed appropriately, eliminating the hazard of defective operation, not endangering the surrounding and the users.
- The importer/supplier bears no responsibility for damages resulting from failure comply with these instructions.
FUNCTIONS
Identifying day and night – The ceiling lamp can work during the day and
at the night when the last two DIP switches (5 and 6) are in the Disable
position.
Time delay- Time delay (DIP switches 3 and 4) can be adjusted according
to the user’s wishes. The minimum time is 5 seconds. The maximum time is 300
seconds.
Detection distance – It is possible to adjust the detection distance (DIP
switches 1 and 2). Depending on their combination, an detection distance 6m,
4m, 3m, 1 m (100%, 75%, 50%, 25%) is achieved.
DETECTION RANGE DIAGRAM
EXAMPLE
The ambient light in the room is greater than 2 Lux. The presence of motion
does not activate the ceiling lamp.
The ambient light in the room is less than 2 Lux. The motion detection
activates the ceiling lamp.
300 seconds after the last motion detection, the ceiling lamp will turn off.
WIRING DIAGRAM AND FUNCTIONAL ADJUSTMENTS
INSTALLATION
- Turn off the power supply.
- Hold both sides of the handle to remove the bracket, unscrew the screw to remove the back cover.
- Pass the cable through the center hole of the bracket and screw the bracket to the ceiling.
- The cable passes through the guard sleeve and is connected to the terminal. Choose a color temperature.
- Adjust the sensor settings. Secure the cable and install the back cover according to the original position.
- Puttee wire into the groove of the chassis.
- Point the light at the bracket and buckle it.
- Installed ceiling light.
TAKING CARE OF THE NATURAL ENVIRONMENT CLEANLINESS
- The product and its components are not harmful to the environment.
- Please dispose the package elements separately in containers for the corresponding material.
- Please dispose the broken product separately in containers for out of usage electrical equipment.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, BORIANA LTD declares that the radio equipment type LED CEILING LAMPS
LPSW18CCT, LPSB18CCT is in compliance with Directive 2O14/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.ultralux.bg
| 
---|---
This product contains a light source of energy efficiency class D.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>