KICKER BT Cans Speaker System Instructions
- June 12, 2024
- KICKER
Table of Contents
KICKER BT Cans Speaker System
Product Information
The product is a KICKER BT65 Bluetooth audio system. It is designed to be mounted and wired in a vehicle. Professional installation is recommended, although the responsibility for safe mounting and wiring lies with the user. The product comes with a user manual in multiple languages, including English, German, and Spanish. The manual includes installation instructions, information on Bluetooth pairing, and operation instructions.
Product Installation
To install the KICKER BT65 Bluetooth audio system:
- Ensure professional installation by authorized retailers is performed.
- Mount the system securely in the desired location.
- Wire the system according to the provided wiring diagram:
- Connect the yellow wire to the +12V Constant.
- Connect the black wire to the ground.
- Connect the red wire to the +12V Battery.
- Insert a 15A ATC fuse into the designated slot.
Bluetooth Pairing
To pair the KICKER BT65 with a Bluetooth device:
- Press and hold the Source/Pair button on the remote or the multi-function button on the Right BT65.
- The LEDs will start blinking blue, indicating that the system is in Bluetooth pairing mode.
- On your Bluetooth device, select “BT CANS KICKER” from the list of available devices.
- Once successfully paired, the LEDs will turn solid blue.
Note: For more detailed installation and operation instructions, please refer to the owner’s manual. The product can be operated without the remote, and the remote uses a Carling-style cutout.
IMPORTANT: KICKER recommends a professional installation performed by authorized retailers. You are solely responsible for safely mounting and wiring your products.
Introduction
Thank you and congratulations on your purchase of the KICKER BT Cans Speaker System! The BT Cans are the next generation in mobile audio systems, combining the innovations of new transfer protocols with KICKER’s finest speaker and amp performance. This audio system has everything you need ready to roll right out of the box. Bluetooth and AUX Input, integrated amplifier, RGB lighting, line output, and a remote control built to mount in a standard marine panel. And at its heart, the high-powered amp and 6.5” speakers pack a punch with KICKER signature quality audio.
Sincerely
- Steve Irby
- President/CEO
IMPORTANT SAFETY WARNING
IMPORTANT SAFETY WARNING
PROLONGED CONTINUOUS OPERATION OF AN AMPLIFIER, SPEAKER, OR SUBWOOFER IN A DISTORTED, CLIPPED, OR OVER-POWERED MANNER CAN CAUSE YOUR AUDIO SYSTEM TO OVERHEAT, POSSIBLY CATCHING FIRE AND RESULTING IN SERIOUS DAMAGE TO YOUR COMPONENTS AND/OR VEHICLE. AMPLIFIERS REQUIRE UP TO 4 INCHES (10CM) OPEN VENTILATION. SUBWOOFERS SHOULD BE MOUNTED WITH AT LEAST 1 INCH (2.5CM) CLEARANCE BETWEEN THE FRONT OF THE SPEAKER AND ANY SURFACE. KICKER PRODUCTS ARE CAPABLE OF PRODUCING SOUND LEVELS THAT CAN PERMANENTLY DAMAGE YOUR HEARING! PLEASE USE COMMON SENSE WHEN CONTROLLING VOLUME.
Installation
Install the included 15A fuse on the Yellow +12V Constant wire within 18” of the battery. Connect the battery ring terminals of the Yellow +12V Constant and Black Ground wires to the battery. Connect the Red +12V Ignition Wire to the switched ignition power source, or dash-mounted switch. Using the included splice connectors, connect the right speaker to the left speaker. Connect the male LED plug (4-pin molex) to the female LED plug (4-pin molex). Use the KMLC (sold separately) to control the RGB LED lighting. Connect the remote control to the remote input. Mount the remote control in your vehicle.
Use the multi-function button on the Right BT65 to control.
- Short Press – Source
- Long Press – Pairing
- Very Long Press – Reset
- Double-Press – Play/Pause
Bluetooth Pairing
Press and hold the Source/Pair button of the remote, or the multi-function button of the Right BT65, to enter Bluetooth pairing mode. The LEDs will begin to blink blue. Select BT CANS KICKER from your list of Bluetooth devices. Once successfully paired, the LEDs will turn solid blue. Please see the owner’s manual for more installation and operation instructions. Remote not required for operation. Remote uses Carling-style cutout.
FCC STATEMENT
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF exposure statement
The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Scan here for owner’s manual
If you have a problem with this product, prior to returning the product to the store, Contact KICKER Tech Support Call us at 800-256-KICK (5425), or contact us at [email protected] with any questions or problems.
Thank you for your KICKER purchase!
U.S. Customers Only