hansgrohe FixFit Q 26887XXX Shower Holder Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
- hansgrohe FixFit Q 26887XXX Shower Holder Instruction
- Product Information
- Assembly
- Safety Notes
- Installation Instructions
- Technical Data
- Maintenance
- Dimensions
- Spare parts
- Cleaning
- Cleaning recommendation / Warranty / Contact
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hansgrohe FixFit Q 26887XXX Shower Holder Instruction
Product Information
Product Name : FixFit
Model Numbers : Q 26887XXX, S 26888XXX, E 26889XXX
Languages available in the user manual: English
Safety Notes: Gloves should be worn during installation to prevent
crushing and cutting injuries. –
Technical Data:
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0.1 – 0.5 MPa
- Test pressure: 1.6 MPa
Hot water temperature:
- Rate of flow by 0.3 MPa:
- Thermal disinfection:
The product is exclusively designed for drinking water!
Product Usage Instructions:
Safety Precautions:
- Wear protective gloves during installation to prevent crushing and cutting injuries.
Assembly Instructions:
- Follow the provided assembly instructions (English),or any other language instructions available in the user manual.
- Make sure to check the maintenance instructions (see page 21) and cleaning instructions (see page 22) for proper maintenance and care of the product.
- Refer to the provided installation examples (see page 21) for guidance on how to install the product.
Technical Specifications
- Operating pressure should not exceed 1 MPa.
- The recommended operating pressure range is between 0.1 and 0.5 MPa.
- The product has been tested at a pressure of 1.6 MPa.
- The product is suitable for use with hot water. Refer to the user manual for the specific hot water temperature range.
- The rate of flow at 0.3 MPa is specified in the user manual.
- The product is designed for thermal disinfection and is safe for use with drinking water.
Note : It is important to consult the specific user manual in your language for detailed instructions and information regarding the FixFit product model you are using.
Assembly
Safety Notes
Gloves should be worn during installation to prevent crushing and cutting injuries.
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
Technical Data
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 60°C
- Rate of flow by 0,3 MPa:: 25,2 l/min
- Thermal disinfection: 70°C / 4 min
The product is exclusively designed for drinking water!
Symbol Description
Do not use silicone-containing acetic acid!
Maintenance
The check valves must be checked regularly according to EN 806-5 in accordance with national or regional regulations (at least once a year).
Dimensions
Spare parts
- XXX = Colors
- 000 = Chrome Plated
- 140 = Brushed Bronze
- 340 = Brushed Black Chrome
- 670 = Matt Black
- 700 = Matt White
Cleaning
Installation example
Cleaning recommendation / Warranty / Contact
www.hansgrohe.com/ cleaning-recommendation www.hansgrohe.com/ cleaning-recommendation www.hansgrohe.com/ cleaning-recommendation www.hansgrohe.com/ cleaning-recommendation
Hansgrohe · Auestraße 5 – 9 · D-77761 Schiltach · Telefon +49 (0) 78
36/51-1282 · Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet:
www.hansgrohe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>