ColorsLED PRO Series LED Strip User Manual
- June 12, 2024
- ColorsLED
Table of Contents
ColorsLED PRO Series LED Strip
Product Information
| Product Name | DF6RGBW |
|---|---|
| Dimension | 24V-12mm |
| colors@colorsled.com | |
| Version | A/00 |
| Website | www.colorsled.com |
Product Usage Instructions
- Input voltage: DC24V
- Cutting unit: 33.33mm (1.31″)
- LED pitch/Min. bend diameter: 60mm (2.36″)
- Mounting: 3M tape
- Max. length: 5000mm (16.4′)
- IP protection: IP20/IP65/IP67
- On-off times: 10000 test times
- Warranty: 3 years (Warranty based on indoor usage)
General description
- RGBW full color lights
- Large beam angle
- Widely adapted to various controllers
- High quality FPC, high thermal conductivity 3M glue
- Ta: -25~40°C；Tc：75°C（max）
Dimension
- Input voltage： DC24V
- CRI： /
- Max.power: 19.2W(1m)
- Power range: 14.8～19.2W(1m)
- Rated current： 0.7A(1m) 3.06A(5m)
- Typical Power： 16.8W(1m) 73.5W(5m)
- IP： IP20/IP65/IP67
- On-off times: 10000（test times）
- Warranty： 3years
- (Warranty based on indoor age)
- Max.length： 5000mm(16.4′)
- Cutting unit： 33.3mm(1.31″)
- LED pitch：/
- Min. bend diameter： Φ60mm(2.36″)
- Mounting： 3M tape
- Copper foil: 2oz
Photo-electric Parameters
CRI
|
Color
|
CCT
|
Lumen(lm/m)
|
Lumen(lm/ft)
|
lm/W
|
ErP 2019
---|---|---|---|---|---|---
/| RGBSW| RGB+2700K| 640| 195| 38| G
/| RGBWW| RGB+3000K| 655| 199| 39| G
/| RGBNW| RGB+4000K| 640| 195| 38| G
/| RGBW| RGB+6000K| 640| 195| 39| G
- The tolerance of output data can be vary up to 15%.
- the output data tested according to IES TM-30-15.
- the output data is based on IP20/1merter，data of 5m in only for reference.
- IP protection process leads changes to size, CCT and luminous flux.
IP process information
Electronic & output data
IP Process
|
Picture
|
Picture description
|
Size
|
optional CCT/color for finished product
|
lumen output rate
---|---|---|---|---|---
NO
| | No proof|
12mm*1.6mm
|
RGB+2700K/3000K/4000K/6000K
|
100%
NA
| | Nano-proof|
12mm*1.6mm
|
RGB+2700K/3000K/4000K/6000K
|
98%
ET
| | Extrusion tube|
14mm*4.8mm
|
RGB+2700K/3000K/4000K/6000K
|
88%
Product Solutions
Name
| ****
Picture
| ****
Code
| ****
coding
| ****
description
---|---|---|---|---
Fixed Clip
| |
94-02-00-0004
| ****
FSW12SA
| ****
Silicone clip, screw: PA 3*8mm, suitable for 12mm FPC,EF/ET strip
Silicone Plug Kit
| |
94-02-00-0048
| ****
DT12EA-A
| ****
Silicone plug kit, suitable for 12mm board width, ET/EF series silicone extrusion light strip
Silicone stopper kit
| |
94-02-00-0049
| ****
DW12EA-A
| ****
Silicone tail plug kit, suitable for 12mm board width, ET/EF series silicone extrusion light strip
Mounting groove
| |
94-02-00-0026
| ****
CPT12EA-16100100
| ****
Transparent PVC mounting groove,suitable for 12mm FPC,silicone extruded EF/ET strip
Stopper glue
| |
94-16-03010001
| ****
AS-PG-0003
| Silicone gel,suitable for ET/EF/EG/ERG waterproof LED strip
Packing
IP Process
| Product
size(mm)
| Product quantity (m/reel)| Product quantity (m/case)| Product net weight(kg)| Net weight per box(kg)| Gross
weight(kg)
| Package
size (cm)
---|---|---|---|---|---|---|---
NO| 5000122.1| 5| 250| 0.15| 7.5| 8.58| 414126
NA| 5000122.1| 5| 250| 0.16| 8| 9.08| 414126
ET| 5000144.8| 5| 150| 0.46| 13.8| 14.88| 414126
Precautions
-
Please drive the led strip with 24VDC isolated power, and the ripple of the constant voltage source should be less than 5%.
-
Please do not bend the strip into an arc with a diameter less than 60mm to ensure the longevity and reliability.
-
Do not fold it in case any damage of LED beads.
-
Do not pull the power wire hard to ensure the longevity. Any Crash may damage the LED light is prohibited.
-
Please make sure the wire is connected to the anode and cathode correctly. The power output should be consistent with
the voltage of the strip to avoid damage. -
LED lights should be stored in dry, sealed environment. Please only unpack it before usage. Ambient temperature: -25℃~40 ℃. Storage temperature: 0℃~60℃. Please use the strips without waterproof within indoor environment with humidity less than 70%.
-
Please be careful during operation. Do not touch the AC power supply in case of electric shock.
-
Please leave at least 20% power for the power supply during using to ensure there is enough power supply to drive the product.
Do not use any acid or alkaline adhesives to fix the product (e.g.: glass cement). -
Do not scratch the product when IP processof the product is NA. Ultraviolet rays will damage the nano-layers on the product and seriously affect the life of the product.
-
E-mail:colors@colorsled.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>