TAMRON A065 70-180mm F2.8 Di II VC VXD G2 Camera Owner’s Manual

TAMRON A065 70-180mm F2.8 Di II VC VXD G2 Camera

Specifications

• Model: A065
• Compatible with: Sony E
• Focal Length: 70-180mm
• Aperture: F/2.8
• Lens Type: Di III VC VXD G2
• Weight: 855g (30.2 oz)
• Minimum Focus Distance: 0.3m (11.8 inches) (wide-angle) / 0.85m (33.5 inches) (telephoto)
• USB Type -C Port
• Viewing angle (diagonal) 34°21’–13°42′
• Optical construction 15/20
• Maximum magnification ratio 1:2.6 (MOD for wide angle) / 1:4.7 (MOD for tele)
• Filter size ø 67 mm
• Length 156.5 mm (6.2″)
• Maximum diameter ø 83 mm
• Weight 855 g (30.2 oz)
• Sunshade HA065
• Connection type USB Type-C

Product Usage Instructions

Mounting and Dismounting the Lens

To mount the lens onto your camera:

1. Align the lens with the camera’s lens mount.
2. Rotate the lens clockwise until it locks into place.

To dismount the lens from your camera:

1. Press the lens release button on the camera.
2. Rotate the lens counterclockwise and remove it from the camera.

Focusing

To focus using the lens:

1. Rotate the focus ring on the lens to adjust the focus manually.

Zooming

To zoom using the lens:

1. Rotate the zoom ring on the lens to adjust the focal length.

Vibration Compensation (VC)

The lens is equipped with Vibration Compensation (VC) technology to reduce camera shake. To use VC:

1. Toggle the VC switch on the lens to the desired setting.

Using the Lens Hood

The lens includes a lens hood for shading and protecting the lens. To use the lens hood:

1. Attach the lens hood to the lens by aligning the marks and twisting it clockwise.

To store the lens hood:

1. Remove the lens hood from the lens by twisting it counterclockwise.
2. Store the lens hood in a safe place for future use.

FAQ

Q: What is the minimum focus distance of the lens?

A: The minimum focus distance is 0.3m (11.8 inches) at the wide-angle end and 0.85m (33.5 inches) at the telephoto end.

Q: Does the lens have image stabilization?

A: Yes, the lens is equipped with Vibration Compensation (VC) technology to reduce camera shake.

Model: A065

70-180mm F/2.8 Di III VC VXD G2

For Sony E

• The Marking is a directive conformity mark of the European Community (EC).

The EEC Conformity Report applies to the Council Directive 2014/30/EU, 2011/65/EU and is used by Tamron Co., Ltd., manufacturer of this product.

Thank you for purchasing this Tamron lens. Before using the new lens, you should read the contents of this user guide to use the lens correctly. It is also important to read the instructions for the camera you want to mount the lens on.
After you have read it, this user guide should be kept in a safe place.
You should also read the “Precautions for Safe Use of Tamron Lenses” document that comes with the lens for detailed safety precautions to be followed when using Tamron lenses.

Explains precautions to help avoid problems.
• Explains things you should know in addition to basic usage.

PART NAME

(See Figure 1)

1. Sun visor
2. Setting mark for attaching the sun visor
3. Lock mark for sun visor
4. Filter ring
5. Shutter release mark
6. Focus ring
7. Zoom ring
8. Focal length scale
9. Mark for focal length
10. Focus button
11. Zoom laser switch
12. Custom switch
13. Connection port
14. Attachment mark for lens
15. Interface contacts between lens and camera

ASSEMBLY AND DISASSEMBLY OF THE LENS

• Remove the back cover of the lens. Align the lens attachment mark ⑭ and the mounting mark on the camera, and insert the lens.
• Turn the lantern glass clockwise until it locks.
• The lens is removed by rotating the lens in the opposite direction while pressing the lens release button on the camera.
• Turn off the power to the camera before mounting or dismounting the lens.
• Read the user manual for the camera for further information.

TURN ON FOCUS MODE

• Select the desired focus mode on the camera.
• With manual focus, you must turn the focus ring ⑥ to get the desired focus.
• Read the user manual for the camera for further information.
• In AF mode, it can sometimes be difficult to get autofocus to work, depending on the subject.

VIBRATION COMPENSATION

The VC (Vibration Compensation) mechanism reduces blur caused by handheld photography.

How to use VC
To enable VC, set the camera’s steady shot function “ON” in the camera. If VC is not needed, turn off the bump shot feature “OF”.
Press the shutter button halfway down and confirm that the viewfinder image is stable before taking a picture.

Under the following conditions, VC is effective

• Dimly lit places
• Places where photography with flash is prohibited
• Places where tripods cannot be used

The VC may not operate adequately under the following conditions

• When a picture is taken from a vehicle that is shaking violently
• Shooting during excessive camera movement
• When shooting using a tripod
• Disable the steady shot setting in the camera when taking pictures during light bulb photography (long exposures). Otherwise, VC may cause a malfunction.
• The viewfinder image may blur immediately after the shutter button is pressed halfway. This is due to the principles of VC and not a malfunction.
• When using VC, the total number of images that can be recorded is reduced due to the camera’s power consumption.
• Disable the vibration compensation in the camera settings while shooting while the camera is secured with anything other than your hand (such as a tripod).
• You may feel the lens rattle when the camera is turned off or when the lens is removed from the camera. This is not a malfunction.
• Read the user manual for the camera for further information.

FOCUS BUTTON

(See Figure 1)

Press the focus setting button ⑩ to use the function assigned from the camera.
See the manual for the camera for further information

CONNECTOR PORT

(See Figure 1)

Lenses with the connection port ⑬ can be connected to a computer with the TAMRON connection cable (sold separately). Then you can, by use the dedicated program “TAMRON Lens Utility TM”, update the firmware and register functions on the custom switch ⑫.
See the online help for “TAMRON Lens Utility” at the link below for details.
https://www.tamron.com/jp/consumer/support/help/lensutility/en/

• Do not use the TAMRON connection cable (sold separately) for any purpose other than connecting the TAMRON lens equipped with a connection port, to a computer.
• Tamron assumes no responsibility for lost or damaged data when using the TAMRON connection cable (sold separately).

CUSTOM SWITCH

(See Figure 1)

When using the custom switch ⑫, you can switch the functions registered on the lens with the dedicated program “TAMRON Lens Utility”.

ZOOMING (See Figure 1)

Turn the zoom ring ⑦ to adjust the focal length (zoom position) to the desired position.

ZOOM LOCK

(see figures 1, 2, 3)

You can lock the zoom ring ⑦ to a focal length of 70mm to prevent it from rotating.

Setting the zoom lock (see fig. 2)
Adjust 70mm on the focal length scale ⑧ against the focal length mark ⑨.
Set the zoom lock switch ⑪ towards the subject.

Releasing the zoom lock (see fig. 3)
Set the zoom lock switch ⑪ towards the camera.
• You zoom by releasing the lock and then rotating the zoom ring ⑦.

SUN VISOR (see figures 1, 4, 5)

The lens hood ① can eliminate stray light that can affect the image.

Use of the sun blender (see fig. 4)
Align the lens hood attachment setting mark ② on the lens hood with the lens hood release mark ⑤ on the lens.
Rotate the lens hood ① in the direction of the arrow until the lens hood lock mark ③ meets the lens hood release mark ⑤.

Storing the solar diffuser (see fig. 5)
Mount the sun visor ① backwards and rotate it until it locks.
• Please note that the periphery of the photograph may be darkened if the lens hood ① is not attached correctly.

PRECAUTIONS BEFORE USE

• An internal focusing (IF) system is used to reduce the minimum focus distance. The angle of view can be wider than on lenses with other focusing systems when shooting at a distance less than infinity.
• The lens hood or lens tube can block the light from the flash. It is recommended to take sample photos in advance.
• Differences in the display systems of cameras can cause them to show values ​​that are different from the maximum and minimum values for aperture from the specifications. This does not indicate an error.
• Do not touch the lens-camera interface contacts ⑮ with your fingers. Otherwise, a malfunction may occur.
• If the temperature changes suddenly, condensation may form and cause malfunctions.
• The front lens is covered by a smudge-resistant coating. After removing dust on the lens surface with a blower or other means, dry it with a dry cloth.
• Never use benzene, thinner or other organic solvents to clean the lens.
• Store the lens in a clean and well-ventilated place.
• You can find more information about cleaning and storing the lens, compatibility with cameras and other support information at our website. https://www.tamron.com/global/consumer/support/

Disposal of electrical and electronic equipment in private homes. Disposal of used electrical and electronic equipment equipment (applies in the EU and other European countries with sorted waste management)

• This symbol indicates that the product should not be treated as household waste.
• Instead, it must be collected separately for the recycling of electrical and electronic equipment.
• If the new products have been purchased, the product can be delivered to the distributor, possibly collecting electrical and electronic waste.
• By ensuring that the product is disposed of correctly, you will help prevent negative consequences for the environment and health, which could otherwise be caused by incorrect waste management of the product or parts of the product.
• If the product is disposed of illegally, it may result in a fine. You can get more information about recycling the product by contacting your local municipality, the waste management service or the shop where you bought the product.

Precautions for safe use of Tamron lenses

• For safe use, please read “Precautions for Safe Use of Tamron Lenses” and the user manual before using the product.
• After they have been read, they should be kept in a place where they are easily accessible when needed.
• Precautions are divided into two categories according to the degree of danger involved.

WARNING
This indicates that if the instructions are not followed or if they performed incorrectly can result in death or serious injury.

• Do not look at or photograph the sun or other strong light sources with this lens or a camera to which the lens is attached.
• This can lead to loss of vision or other damage to the lens, or fire.
• Do not disassemble, repair or modify the lens.
• This may damage the lens or camera.
• Keep the lens out of the reach of small children.
• There is a risk of injury if the lens is dropped or dropped.

CAREFUL

This indicates that if the instructions are not followed or if they performed incorrectly may result in personal injury or physical damage.

• Do not place the lens in direct sunlight or leave it in an extremely hot place, such as in a car. The may damage internal parts of the lens or cause a fire.
• Always attach the lens cap when the lens is not in use.
• When attaching the lens to the camera, ensure that the lens is attached correctly to the camera and that it is locked down.
• If the lens is not attached correctly, it may be difficult to remove, or it may fall off and cause injury or personal injury.
• Do not use this lens for any purpose other than photography.
• Do not transport the lens while it is still attached to a tripod.
• Regarding the lens equipped with a coupling port
  • Place the lens stably and safely when adjusting it using the application (TAMRON Lens UtilityTM). Make sure it is not dropped or affected in any way.
  • The lens must be connected to the computer with a Tamron connection cable (sold separately).
  • Do not touch the connection port with your fingers or metal objects. You must also ensure that it does not dust or water adheres to the connection port. If the coupling port is dirty, this can result connection problems.
• Tamron accepts no responsibility for damage caused by errors, fire or other accidents that may occur when using accessories other than Tamron accessories. Please note that you will have to pay for any repairs to the Tamron lens resulting from such damage, as these are not covered the guarantee.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>