Elements LA18905FPC Brice 64 Complete Fireplace Instruction Manual
- June 12, 2024
- ELEMENTS
Table of Contents
**Elements LA18905FPC Brice 64 Complete Fireplace Instruction Manual
**
Assembly Instruction
CAUTION: Please read intructions thoroughly before unpacking assembly parts. Sharp, exposed staple tips cancause injury, therefore, for your protection, pleas e remove any exposed staples used in packing.
- We recommend that you should assemble this product with the assistance of another person, this will make assembly easier, and will help to eliminate damage to the product or injury to persons during assembly.
- Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during shipment.
- Please do not over tighten screws or bolts.
- Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your newly purchased product correctly and efficiently.
PART LIST
No| PART DESC| CODE| Q’TY
1| CABINET TOP PANEL| PLA-1890-FPTOP PLA-1890-5-FPTOP| 1
2| CABINET BOTTOM PANEL| PLA-1890-FPBAS PLA-1890-5-FPBAS| 1
3| CABINET LEFT PANEL| PLA-1890-FPLPN PLA-1890-5-FPLPN| 1
4| CABINET RIGHT PANEL| PLA-1890-FPRPN PLA-1890-5-FPRPN| 1
5| CENTER LEFT PANEL| PLA-1890-FPCPN1 PLA-1890-5-FPCPN1| 1
6| CENTER RIGHT PANEL| PLA-1890-FPCPN2 PLA-1890-5-FPCPN2| 1
7| LONG FRONT CENTER STRIP| PLA-1890-FPLFS2 PLA-1890-5-FPLFS2| 1
8| LONG FRONT LEFT STRIP| PLA-1890-FPLFS1 PLA-1890-5-FPLFS1| 1
9| LONG RIGHT STRIP| PLA-1890-FPLFS3 PLA-1890-5-FPLFS3| 1
10| L/R SHELF PANEL| PLA-1890-FPSHF1 PLA-1890-5-FPSHF1| 2
11| CENTER SHELF PANEL| PLA-1890-FPSHF2PLA-1890-5-FPSHF2| 1
12| SHORT CENTER FRONT STRIP| PLA-1890-FPSFS2 PLS-1890-5-FPSFS2| 1
13| SHORT CENTER LEFT STRIP| PLA-1890-FPSFS1 PLA-1890-5-FPSFS1| 1
14| SHORT CENTRE RIGHT STRIP| PLA-1890-FPSFS3 PLA-1890-5-FPSFS3| 1
15| LONG BASE APRON| PLA-1890-FPLAP PLA-1890-5-FPLAP| 2
16| SHORT BASE APRON| PLA-1890-FPSAP PLA-1890-5-FPSAP| 3
17| LEFT BARNDOOR| PLA-1890-FPDOR1 PLA-1890-5-FPDOR1| 1
18| RIGHT BARNDOOR| PLA-1890-FPDOR2 PLA-1890-5-FPDOR2| 1
19| L/R BACK PANEL| PLA-1890-FPBPN1 PLA-1890-5-FPBPN1| 2
20| CENTER BACK PANEL| PLA-1890-FPBPN2 PLA-1890-5-FPBPN2| 1
21| CENTER BACK PANEL| PLA-1890-FPBPN3 PLA-1890-5-FPBPN3| 1
HARDWARE LIST
No| HARDWARE DESC| CODE| Q’Tli
A| | CAM LOCK SCREWS| FPHW| 54
B| | CAM LOCK CONNECTOR| 54
C| | WOOD DOWEL (M8 x 40MM)| 43
D| | SCREWS (M6x 10MM)| 8
E| | SCREWS (M3.5 x14MM)| 10
| | SHELF SUPPORT| 8
G| | METAL| 1
H| | ROLLER| 4
I| ``| PLASTIC STOPPER| 2
J| | ADAPTOR| 4
K| | SCREW (M6 x 35MM)| 4
L| | CORNER SLIP| 12
M| | SCREWS (M3 x 12MM)| 12
N| | SCREWS (M3 x 14MM)| 8
O| | ANTI TIPPING KITS| 2
P| | NAIL LEG| 9
Q| | ALLEN KEY| 1
Unpack thre fireplace and follow the instructions to install the Top Trim and
Side Trims to the fireplace. Set the fireplace carefully from the back of the
mantel and center it in the opening. Do Not attempt to install the fireplace
from the front of the mantel. It will not fit. Fasten the fireplace to the
mantel with six insert screws as shown.
COMPLETED
MADE IN MALAYSIA