Hama 00223498 Night Light with Socket and USB Instruction Manual

: June 12, 2024
: Hama

Table of Contents

Operating instruction
Explanation of Warning Symbols and Notes
Package Contents
Safety Notes
Operation
Care and Maintenance
Technical specifications
Warranty Disclaimer
Service & Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Hama 00223498 Night Light with Socket and USB Instruction Manual

Operating instruction

Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference.

Explanation of Warning Symbols and Notes

Risk of electric shock
This symbol indicates product parts energized with a dangerous voltage of sufficient magnitude to constitute a risk of electric shock.

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package Contents

1 Night Light
These operating instructions

Safety Notes

The product is intended for private, noncommercial use only.
Protect the product from dirt, moisture and overheating and use it in dry rooms only.
Do not drop the product and do not expose it to any major shocks.
Do not operate the product outside the power limits given in the specifications.
Do not modify the device in any way. Doing so voids the warranty.
Do not continue to operate the device if it becomes visibly damaged.
Use the product for its intended purpose only.
Keep this product, as all electrical products, out of the reach of children!
Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
Lay all cables so that they do not pose a tripping hazard.
Do not bend or crush the cable.
Always pull directly on the plug when disconnecting the cable, never on the cable itself.
Dispose of packaging material immediately according to locally applicable regulations.
The product is intended for indoor use only.
Use the item only in moderate climatic conditions.
Do not use the product in areas where the use of electronic devices is not permitted.
Do not use the product in moist environments and avoid splashes.
Never connect multiple units of this product in series.
The product may only be operated with the type of power supply network described on the name plate.
This product is not suitable for lighting rooms in domestic households.

Risk of electric shock

Do not open the device or continue to operate it if it becomes damaged.
Do not use the product if the AC adapter, adapter cable or power cable is damaged.
Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

** Note**

The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced!

Operation

The night light has a brightness and motion sensor. When motion in the dark is detected, the night light automatically switches on. Conversely, the night light switches off when it gets light.
After activation, the night light is lit for about 30 seconds.

Warning – Connecting terminal devices

Before connecting a terminal device, check whether the power output of the charger can supply sufficient power for the device.
Please refer to the instructions in the operating manual of your terminal device.

Warning

Only connect the product to a socket that has been approved for the device. The socket must be installed close to the product and easily accessible.

Warning

When using a multi-socket power strip, make sure that the sum power draw of all the connected devices does not exceed its maximum throughput rating.
If you will not be using the product for a long period of time, disconnect it from mains power. Unless the operating instructions for the devices you want to charge explicitly inform you otherwise, proceed as follows:
Connect your terminal device to a USB charging socket using a suitable USB cable.
Connect the charger to a properly installed and easily accessible power socket.
Charging progress is displayed on your terminal device.
Disconnect the terminal device from the charger if you want to interrupt charging or if the terminal device is fully charged.
Then disconnect the charger from the mains.
When charging batteries built into a device, pay attention to the maximum charging time for the batteries.

Care and Maintenance

Only use dry, soft cloths for cleaning.

Note
Disconnect the device from the power supply before cleaning or if it will not be used for a long period of time.

Technical specifications

Speci fi cations in accordance with Regulation (EU) 2019/1782

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Service & Support

Web: www.hama.com
Tel: +49 9091 502-0

Icons

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.