RENOGY RSHSRZ02P-CA Smart Relay User Manual

RENOGY RSHSRZ02P-CA Smart Relay User Manual

Thanks to its built-in Zigbee 3.0 communication B module, Smart Relay works with Renogy ONE to create a Zigbee LAN where you can control other connected devices intelligently and enable scene synchronization.
This User Manual contains instructions for Smart Relay. Please read the User Manual carefully before using the device.

CAUTION

• Please avoid exposing the components to direct sunlight. Do NOT allow water to enter Smart Relay. To ensure quality wireless communication, please keep it away from metal objects at a distance of at least 20 cm or 7.88 inches.
• After wiring, use PE double-sided adhesive to secure Smart Relay to the selected mounting location.

WARNING

• Do NOT disassemble Smart Relay because no parts inside it require maintenance or repair.
• Smart Relay can only be powered by a DC power supply (8V-30V); otherwise Smart Relay will be damaged. Risk of electric shock! Make sure the power supply is powered off before connection.
• When wiring, make sure the wire retainer in the hole is fully opened.

Product Overview

positive/negative terminal of a DC power supply(8V-30V).
K1| Connecting to a push button switch to turn devices on or off.
S1| Connecting to a rocker switch to turn devices on or off.
**** IN| Connecting to the fire wire of an AC power supply or the positive terminal of a DC power supply.
OUT| Connecting to the positive side of the load.

Restoring to factory settings and waiting for network distribution, flashing for 3 minutes.On: Relay status-ON.Off: Relay status-OFF.
Button| Press: Power on/off Smart Relay. Long press for 5s: Factory reset.

Wiring Diagram

AC Load

WARNING

• Connect the AC Power Supply to OUT/IN only; otherwise Smart Relay may be damaged.
• The input voltage of AC Power Supply shall not exceed 250 V.
• For an AC load, operating voltage: ≤ 250 V; operating current: ≤ 16 A.
• You can choose to connect your switch(es) to either, neither, or both of S1 and K1 to your circuit on demand

DC Load

WARNING

• The input voltage of DC Power Supply shall not exceed 30 V.
• For a DC load, operating voltage: ≤ 30 V; operating current: ≤ 16 A
• You can choose to connect your switch(es) to either, neither, or both of S1 and K1 to your circuit on demand

Add Smart Relay (Zigbee) to Renogy ONE

Smart Relay should be used in association with Renogy ONE. For more detailed instructions, please refer to the User Manual of Renogy ONE

Factory Reset

Method 1: Long press the Button for 5s until the LED indicator flashes.
Method 2: Long press the push button switch connecting to K1 until the LED indicator flashes. Method 3: Turn on/off the rocker switch connecting to S1 10 times continuously.

Technical Specifications

Operating
Temperature| -20°C-40°C (-4°F-104°F)
Operating
Humidity| 0-90%RH
Dimensions| 20 x 40 x 44 mm (0.79 x 1.57 x 1.73 in)

Maintenance

For optimum performance, it is recommended to perform these tasks regularly. Maintenance

• Ensure Smart Relay is mounted in a clean, dry, and ventilated area.
• Ensure there is no damage or wear on the cables.
• Make sure that Smart Relay is in normal state.
• Ensure there is no any corrosion, insulation damage, or discoloration marks of overheating or burning.

Technical Support

For additional support, contact the Renogy technical support team through renogy.com /contact-us. Have the following information available when contacting Renogy.

• Owner name
• Purchase channel
• Contact information
• Serial number
• Order number
• Brief description of the issue

Disclaimer

• Renogy makes no warranty as to the accuracy, sufficiency, or suitability of information in the User
• Manual because continuous product improvement  are going to be made.
• Renogy assumes no responsibility or liability for losses or damages, whether direct, indirect, consequential, or incidental, which might arise out of the use of information in the User Manual.
• Renogy is not responsible or liable for the failures, damages, or injuries resulting from repair attempted by unqualified personnel or improper installation and operation.
• The illustrations in the User Manual are for demonstration purposes only. Details may appear slightly different depending on product revision and market region.
• Renogy reserves the right to change the information in the User Manual without notice.

Renogy Empowered

Renogy aims to empower people around the world through education and distribution of DIY-friendly renewable energy solutions.

We intend to be a driving force for sustainable living and energy independence.

In support of this effort, our range of solar products makes it possible for you to minimize your carbon footprint by reducing the need for grid powe

Live Sustainably with Renogy

Did you know? In a given month, a 1KW solar energy system will…
Save 170 pounds of coal from being burned
Save 300 pounds of CO2 from being released into the atmosphere
Save 105 gallons of water from being consumed

Renogy Powe

Renogy Power Plus allows you to stay in the loop with upcoming solar energy innovations, share your experiences with your solar energy journey, and connect with like-minded people who are changing the world in the Renogy Power Plu  community

Also, follow us on Social Media @RenogySolar

Visit renogy.com to find relevant documentation or get more support via “Contact Us”
Renogy reserves the right to change the contents of this manual without notice.

Join the Renogy Power Plus Community by downloading the DC Home App. Find your e-warranty here, and more.

https://activity.renogy-dchome.com/#/?id=77&type=3&param=Smart Relay

References

• Renogy® Official- offer all off grid solar system products
• Renogy® Official- offer all off grid solar system products
• Contact Us | Renogy Solar Panels & Complete Solar Kits

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>