bees LIGHTING GC02 Series LED Canopy Light for Gas Station Instruction Manual
- June 12, 2024
- bees LIGHTING
Table of Contents
LED CANOPY - GC02 Series
FEATURE
- Built-in motion sensor base, allowing you to install the microwave motion or PIR sensor
- Working temperature: – 4°F ~+104°F / -20°C ~+40°C
- Lumen Maintenance over 70% @ 50,000+ Hours
- CRI: 80+; PF>0.9
- Beam Angle: 150°
- Body: Dark Bronze Finish. Modern design for modern and narrow space
- Low-profile design with PMMA lens gives even no glare light distribution and over 90% light transmission rate
- Watt and CCT adjustable to fit for different locations · Surface mounted or pole mounted
Specification
| Model | HYA-GC2-40/60/80W-H-3CCT |
|---|---|
| DLC ID | S-TMNRLK |
| Watt | 40/60/80W Selectable |
| CCT | 3500K/4000K/5000K Selectable |
| Lumens | 10337 lm @ 80W |
| Dimmable | 0-10V |
| Environment Location | Wet Location |
| Vottage | 120-277V |
| OPTION | Motion Sensor |
| QTY/PACK | 4 PCS/PACK |
| Package Size | 15.59 in x 12.24 in x 12.24 in |
| Package Weight | 22.66 lbs |
Application: parking garages, stairwells, passageways, underpasses, and
many other commercial or industrial applications.
ACCESSORIES
| Image | Description |
|---|---|
| Motion Sensor (Daylight Havesting) (Sold Seperately) |
Dimension
Surface mounted Installation
1 Loosen the screw to take off the mounting plate from the lamp.
- Mounting plate
- Screw
2. Screw the mounting plate to the ceiling.
3. Hang the lamp on the ring so as to connect wires with terminal caps.
Input/Dimmer Lamp
- Green
- White
- Black
- Dim-
- Pink
- Dim+
- Purple
- this connection can be omitted if with non-dim driver
4. Hook up lamp on the mounting plate.
5. Secure the screw. Installation completed.
- Screw
Pole mounted Installation
1. Connecting wires with terminal caps as picture shows.
- G3/4″ steeve
- G3/4″ thread
Input/Dimmer Lamp
- Green
- White
- Black
- Dim-
- Pink
- Dim+
- Purple
- this connection can be omitted if with non-dim driver
2. Rotating the steeve to make it fixed with lamp. Installation completed.
Motion Sensor Installation
1. Unscrew the PC cap on the lampshade counter-clockwise with a flat-head screwdriver on the lamp which already installed.
- PC cap
2. Screw the sensor clockwise by hands.
SCALE:3:1
- Sensor
3. After tighten the sensor, Lighting the lamp. if the sensor works well, the installation finish.