Hisense MC086C Mobile Cart User Manual
- June 12, 2024
- Hisense
Table of Contents
Hisense MC086C Mobile Cart
Product Information
The MC086C is a mobile cart designed for Hisense interactive displays. It is suitable for use with 55-86 inch smart boards. The maximum load capacity of this support is 100KG.
Product Usage Instructions
- Before installation, carefully read the user manual to ensure correct and safe use.
- Make sure the Hisense interactive display is compatible with the MC086C mobile cart.
- Position the mobile cart in the desired location.
- Place the Hisense interactive display on the cart’s mounting brackets.
- Ensure that the display is securely attached to the cart.
- Adjust the height and angle of the display to the desired position.
- If necessary, lock the display in place using the provided locking mechanisms.
- Connect any necessary cables or wires to the display and ensure proper connections.
- Test the functionality of the display to ensure it is working correctly.
Contact Hisense Commercial Displays for any further inquiries:
- Tel: +44 (0)115 8248811
- Email: sales@hisense-b2b.com
- Web: www.hisense-b2b.com
Materials List
Other accessories (unit: mm)
Installation Instructions
Step 1: Adjust the wheel to the brake position and screw it into the leg. (Refer to figure 1).
Step 2: Attach the wall hanger bracket lock to one end of the leg.(Refer to figure 2).
Step 3: Attach another leg lock to the other end of the wall hanger bracket. : (Refer to figure 3)
Step 4: Assemble the tray between the two columns. (Refer to figure 4).
Step 5: Lock the wall hangers on the whole machine according to the actual; requirements of the whole machine.(Refer to figure 5)
- Step 6: Hang the assembled whole machine on the wall hanging bracket and lock the safety screw of the wall hanging bar.(Refer to figure 6)
- Make sure the brakes are locked. At least 2 professionals are requiredto complete this step.
Remark: In some cases, the built-in hangers of the whole machine cannot be effectively matched to the foot rack, so the hangers need to be matched with the wall hangers. The fitting process is as follows.
- Lock the wall hanger panel on the wall hanger bracket.
- Hang the whole machine on the wall and lock the safety bolt.
Step10: After the assembly effect, refer to the below picture.
Hisense Commercial Displays
- Tel: +44 (0)115 8248811
- Email: sales@hisense-b2b.com
- Web: www.hisense-b2b.com