FS OLT3610-08GP4S 8-Port GPON OLT User Guide

FS OLT3610-08GP4S 8-Port GPON OLT User Guide

Introduction

Thank you for choosing OLT3610-08GP4$ GPON. This guide is designed to familiarize you with the layout of the GPON OLT and describes how to deploy it in your network.
OLT3610-086P45

Accessories

Optional(Not Included)

Hardware Overview

Front Panel

LEDs

If the indicator is always on, the system is being started;
If the indicator flickers, the system works normally.
4| ALM| Alarm indicator:
If the indicator is off, the system works normally;
If the indicator is always on and the temperature of the device is over high, please check the device.
5| G1-GB| ACT/link indicators of each Gigabit port:
If the indicator is always on, the link on the port is normal.
If the indicator flickers, there is data transmission through the port.
6| T1-T4| ACT/link indicators of each lOGE port:
If the indicator is always on, the link on the port is normal;
If the indicator flickers, there is data transmission through the port.
7| P1-P8| ACT/link indicators of each PON port:
If the indicator is always on, the port is connected to ONU;
If the indicator flickers, there is data transmission through the port.

Ports

Realizes the upgrade of the GPON access device.
10| G1-G4| Gigabit TX ports: Forwards the 1000M Ethernet electric signals.
11| G1-G8| Gigabit SFP ports: Forwards the 1000M Ethernet optical signals.
12| T1-T4| 10GE SFP+ ports: Forwards the 10000M Ethernet optical signals.
13| PI-P8| Gigabit OLT PON ports: Realizes the access of GPON ONU.
14| /| PON debug serial port.

Back panel

Installation Requirements

Safety Recommendations

• Keep clean and dust-free during or after the installation.
• Put the cover of the GPON at a safe place.
• Put tools at a right place where they will not easily fall down.
• Pay attention to the dress code when installing. Avoid damage to the GPON caused by improperly dressed.
• Put on the protective glasses if the installation environment may cause damage to eyes.
  • Avoid improper operations that may cause personal injury or damage to the equipment.

Safety Principles for Live Working
If you operate devices under live working, please follow the safety principles:

• Put off ornaments.
• Pull out the AC power cord and close the direct-current power before operating on the chassis or working beside the power supply.
• Do not touch the power the when power is on.
• Connect the device and the power socket correctly.
• Only professionals are allowed to operate and maintain the device.

Site Environment

• Make sure that the installation site is well-ventilated and the heat of electrical devices is well-discharged.
• Make sure the temperature of installation site is maintained at 0-50°C.
• Follow the electrostatic discharge prevention procedure.
• Put the chassis at a place where cool air can blow off the heat inside the chassis.

Installation

Desk Mounting

Put the GPON on a smooth and safe desk directly.

Rack Mounting

1. Fix the mounting bracket to both sides of the GPON with screws.
   

2. Mount the GPON on a rack by fixing the mounting bracket to the rack.
   

Connecting the CLI Port

1. Insert the corresponding end of the CLI cable into the CLI port of the GPON.
2. Insert the other end of the CLI cable into the corresponding port of a computer host.

Connecting the GPON SFP Port

1. Insert a GPON optical module into the SFP port(P1-P8) of the GPON.
2. Connect the optical module to an optical splitter with a single-mode SC optical fiber cable.
3. Then connect the splitter to an ONU with a fiber cable.

Connecting Ethernet Gigabit SFP Port

1. Insert a SFP optical module into the SFP port (G1-G8) of the GPON.
2. Connect the optical module to a switch or other Ethernet terminal devices with a fiber cable.

Connecting Gigabit Ethernet TX Port

Connect the the TX port(GI-G4) of the GPON to a switch or other Ethernet terminal devices with a direct-through or cross Ethernet cable.

NOTE: When the ports (G1-G4) are used as the TX ports, they cannot be used as the optical ports.

Connecting 1 OGE SFP+ Port

1. Insert a SFP+ optical module into the SFP+ port(T1-T4) of the GPON.
2. Connect the optical module to a switch or other Ethernet terminal devices with a fiber cable.

Troubleshooting

• If the GPON access device is too hot, check whether the air outlet and air inlet are clean.
• If the GPON access device cannot be started and the Power indicator is off, check the power.
• If the port of the GPON access device cannot be linked, check whether the cable is correctly connected and whether the peer connection is normal.
• If the CU port does not work after the system is started up, check whether the CLI port is set to a baud rate of 9600 bps, 8 data bits, no sum check bit, one stop bit and no traffic control.

Online Resources

• Download https://www.fs.com/products_support.html
• Help Center https://www.fs.com/service/fs_support.html
• Contact Us https://www.fs.com/contact_us.html

Product Warranty

FS ensures our customers that any damage or faulty items due to our workmanship, we will offer a free return within 30 days from the day you receive your goods. This excludes any custom made items or tailored solutions.

Warranty: The GPON OLT enjoys 2 years limited warranty against defect in materials or workmanship. For more details about warranty, please check at: https://www.fs.com/policies/warranty.html

Return: If you want to return item(s), information on how to return can be found at: https://www.fs.com/policies/day_return_policy.html

Compliance Information

FCC

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

Responsible party (only for FCC matter)
FS.COM Inc.
380 Centerpoint Blvd, New Castle, DE 19720, United States
https://www.fs.com

FS.COM GmbH hereby declares that this device is in compliance with the Directive 2014/30/EU and 2014/35/EU . A copy of the EU Declaration of Conformity is available at www.fs.com/company/quality_control.html

Die FS.COM GmbH erklart hiermit, dass dieses Gerat mit der Richtlinie 2014/30/EU and 2014/35/EU konform ist. Eine Kopie der EU-Konformitatserklarung nden Sie unter wwwfs.com/de/company/quality_control.html

FS.COM GmbH declare par la presente que cet appareil est conforme a la Directive 2014/30/UE et 2014/35/UE . Une copie de la Declaration UE de Conformity est disponible sur https://www.fs.com/fr/company/quality_control.html

FS.COM LIMITED
24F, Infore Center, No.19, Haitian 2nd Rd,
Binhai Community, Yuehai Street,Nanshan
District, Shenzhen City

FS.COM GmbH
NOVA Gewerbepark Building 7, Am
Gfild 7, 85375 Neufahrn bei Munich, Germany

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>