ZGeMMa H11S 4K-UHD Satellite Receiver User Guide

ZGeMMa H11S 4K-UHD Satellite Receiver

Packaging Contents

Please check all package contents before using your product.

• ZGEMMA H11S
  
  

• User’s Guide

• HDMI Cable

• AC Adapter

• Remote Control

* The accessories may vary according to area.

Product Descriptions

Front Panel

1. “Air” logo LED
2. IR Receiver: Receive the IR signal from remote controller.

Rear Panel

1. DC Power Jack: Connect the provided AC/DC adapter (2A/12V)
2. Power Switch: Press to turn on/off the power
3. LNB IN
4. LOOP OUT: Connect to Satellite cable
5. Reset: USB update key
6. HDMI: Connect to TV using a HDMI cable for both audio and video signals
7. USB: USB2.0
8. ETHERNET: One Ethernet cable
9. Card slot

Remote Control

Connecting TV Via HDMI Cable

First Time Installation

Step1 . Video Input Selection

Step 2. Video Mode Selection

Step 3. Language Selection

Step 4. Conguring Satellite Connection

Software update

1. Download new software file from http://www.zgemma.org/downloads.html
2. Copy the *_mmc.zip file to your usb stick
3. insert the usb stick to your box then open your box
4. Press remote control menu key select standby>recovery>boot menu>flash local image>transmemory>*_mmc.zip select boot1-4 press ok key
5. The flash will auto begin and go to end then you can select boot1-4 to start your box.

More details please go to http://www.zgemma.org

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>