Move it Smart Boxing Gloves User Manual
- June 5, 2024
- Move it
Table of Contents
Move it Smart Boxing Gloves
BOX CONTENTS
INSTRUCTIONS FOR FIRST USE
-
Insert the charging cable into a USB power source, then connect each motion module seperately.
-
Please charge the motion modules for at least 20 minutes before use.
-
Please carefully align and insert each module into the glove slot as shown.
-
Scan the QR code to download the Move It Swift APP,or search ” Move It Swift ” from the Apple App store or Google Playstore.
warning: Android users may be prompted by Google to turn on GPS to allow for a better bluetooth signal detection.- The product can only be be paired and setupthrough the Move It Swift APP.
- Shake both Gloves or Motion Modules to wake it from sleep. The modules will blink blue and red.
- Turn on the mobile phone’s Bluetooth ( ignore and cancel the mobile OS’s default Bluetooth device selection menu prompt). Open the Move It Swift APP, register or login to your account, select “Me – Devices” then assign each
- Glove or Motion Module to your corresponding left and right hand.
-
From the Move It Swift app’s home screen, select “Training”, then choose your workout mode to start your exercise.
STATUS INDICATORS
glove lighting effects
motion module
-
Color Light status Device status
-
Purple fully lit battery is charging
-
No color lights off battery is fully charged
-
Red & Blue alternating awaiting to be paired
connected with the Move It APP -
Blue fully lit left glove is connected
-
Red fully lit right glove is connected
-
Purple slow pulse firmware is updating
SPECIFICATIONS
| Dimension | H43mm W34mm D12mm |
|---|---|
| Materials | ABS |
| Battery Capacity （mAh） | 300mAh Lithium Battery |
| Wireless Connection | BLE |
| Charging Port | MicroUSB（Double head） |
| Sensor | 6-Axis Gyro Sensor |
| Standby Time | Approx.1 months |
| Continuous Use Time | Approx. 4 hours |
| Charge Time | Approx. 40 mins. |
| Weight (oz) | Lenght (cm) |
| --- | --- |
| 8 | 27 |
| 10 | 27 |
| 12 | 28 |
| 14 | 29 |
| Materials | PU, Cotton, Mesh Fabric, Elastic Band |
FAQ
How do I charge the smart gloves?
The Motion Modules charge individually through a microUSB port. Remove the
Motion Modules from the gloves, insert a microUSB cable into the module, then
connect the cable to a USB power source.
How long does it take to fully charge each Motion Module?
Each module takes approximately 40 minutes to fully charge. While charging the
Motion Module will light up red, and once the module is fully charged, the
lights will turn off.
How long is the usage duration on a full charge?
A full charge can provide approximately 4 hours of continuos use. On standby
(sleep mode), the product can maintain its battery capacity for about one
month.
What is the effective Bluetooth connection range of the product?
In an open empty space, the product can maintain a stable Bluetooth connection
up to 30 meters. However, in normal home environments with other wireless
devices nearby, the product’s furthest optimal range is about 10 meters.
ADDITIONAL INFORMATION
- To avoid signal interference during the initial pairing and setup process, please turn off nearby Bluetooth devices.
- If you are still unable to detect your device during the pairing and setup process within the App, restart your phone or try turning the Bluetooth off and back on again.
- For iPhone users with IOS 11 and higher, the system may periodically place the Bluetooth into sleep mode, therefore you may need to toggle Bluetooth off and back on again.
CLEANING AND MAINTENANCE
- The gloves are not water proof and should not be submerged in water. Water can damage the interior foam and the internal electric circuitry.
- The gloves should only be wiped gently with a cloth. Avoid alcohol or other harsh chemical liquids,as it can damage the glove materials.
- Do not wipe the gloves with wet paper towels over a prolonged duration of time. The leather can corrode if subjected to long term contact with water.
- Do not expose the gloves to the sun for a prolonged duration of time. Long term exposure will cause the gloves to age and dry out.
surface cleaning
- The Motions Modules are not water resistent and should be removed prior to cleaning the gloves.
- Soak a cloth in clean water,wring it well, then gently wipe off any surface stains from the leather gloves.
regular maintenance
- Sweat may cause odor overtime. To improve the longevity of the gloves, after using the gloves, place them in a cool and ventilated place so they may properly dry.
- Baking soda is an effective deordorizer that can help neutralize odors. If odor develops and persists, you may cover any exposed electrical ports with masking tape, then carefully and generously sprinkle a palm-full of baking soda on the smooth surface side of the interior. Let the gloves sit in a cool place for approximately 2-3 days. Empty the gloves of baking soda in a bin, then pat the gloves thoroughly to remove any excessive powder.
FCC Statement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including
interference that may cause undesired operation.
RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>