niko 353-702121 Presence Detector User Manual
- June 12, 2024
- niko
Table of Contents
Manual
Presence detector
353-702121
4 Year Warrenty
Presence detector P42LR, 230 V, master, 32-37 m, 360°, for surface mounting
Wiring
230 V – OFF
- Remove if you want to use the contact as a dry contact (potential-free).
**** This product must be secured with a miniature circuit breaker (MCB) of max. 16 A in the electrical cabinet. The MCB rating is limited by national installation rules.
Dimensions
Installation
230 V – OFF
If a grommet needs to be replaced, please make sure the new grommet is halogen-free.
Dismantling
230 V – OFF
App settings
230 V – ON
| | |
---|---|---|---
Factory settings| Switch ON/OFF| 500 lux| 15 min
LED behaviour
****230 V – ON
Green LED continuous on| | Connection OK|
---|---|---|---
Green LED breathing| | Connection OK, overrule ON|
Green LED flashing| | Warming up| Wait
Red LED continuous on| | Error| More info –> 
detector tool
Red LED breathing| | Warning
Blue LED flashing| | Walk test active
Specifications
| Article number | 353-702121 |
|---|---|
| Configuration | 230 V Master |
| Input voltage | 230 Vac ± 10 %, 50 Hz |
| Maximum power consumption | 0.2 W |
| Circuit breaker | maximum MCB rating 16 A* |
| Relay contact | NO (max. µ10 A), potential-free |
| Maximum load incandescent and halogen lamps (cosφ = 1) | 2300 W |
| Maximum load fluorescent lamps (cosφ ≥ 0.5) | 1200 VA |
| Maximum load economy lamps (CFLi) | 350 W |
| Maximum load LED lamps 230 V | 350 W |
| Maximum load LED driver | 500 VA |
| Maximum load electronic transformer | 500 VA |
| Maximum capacitive load | 140 µF |
| Maximum switching current | 165 A/20 ms – 800 A/200 µs |
| Light intensity range | 20 – 2000 lux, ∞ |
| Number of channels | 1 channel |
| Maximum number of secondary detectors | 10 |
| Switch-off delay | pulse, 15 s – 120 min, ∞ |
| Hysteresis on light intensity | 10% |
| Detection angle | 360 ° |
| Detection range (PIR) | Ø 37 m from a height of 3 m |
| Ambient temperature | -25 – +40 °C |
| Mounting method | surface mounting |
| Mounting height | 2 – 3.5 m |
| Colour | white (RAL 9010) |
| Dimensions visible (HxWxD) | 100 x 100 x 70.7 mm |
| Dimensions (HxWxD) | 100 x 100 x 70.7 mm |
| Wire capacity | 1.5/2.5 mm² |
| Maximum range Bluetooth® (free field, depending on the device) | 50 m |
| Operating frequency | 2.4 GHz |
| Maximum radio frequency power | -2 dBm |
| Protection degree | IP54 |
| Impact resistance | IK04 |
| Modification of settings | app (iOS/Android) and 2-way Bluetooth® communication |
| Halogen-free | yes |
| Marking | CE |
- The MCB rating is limited by national installation rules.
Detection area
| H | A Walking | B Across | C Towards | D Presence |
|---|---|---|---|---|
| 2.5 m | ø 32 m | ø 28 m | ø 10 m | ø 8 m |
| 3.0 m | ø 37 m | ø 30 m | ø 8 m | ø 4 m |
Measured according to EN/IEC63180
Troubleshooting
| Problem | Possible cause | Proposed solution |
|---|---|---|
| Load does not turn on | The wiring is not correct | Check the wiring scheme |
| The ambient light is too strong | Check the response value luminosity and raise |
the value if necessary
Load does not turn off| The switch-off delay is too long| Check the switch-off
delay and shorten the delay if necessary
The detector receives false triggers| Check for any objects that may cause
false triggering and remove them from the detection range or lower the
sensitivity
App cannot connect to the detector| Bluetooth® has been disabled on your
mobile device| Enable Bluetooth® on your mobile device
Support & contact
nv Niko sa
Industriepark West 40
9100 Sint-Niklaas, Belgium
www.niko.eu
+32 3 778 90 80
support@niko.eu
Niko prepares its manuals with the greatest care and strives to make them as
complete, correct and up to date as possible. Nevertheless, some deficiencies
may subsist. Niko cannot be held responsible for this, other than within the
legal limits. Please inform us of
any deficiencies in the manuals by contacting Niko customer services at
support@niko.eu.